Trace Messages of TIBCO ActiveMatrix Adapter for Database

Adapter starts to initialize.

Normal operation; no action is necessary.

Start %1 <%2>.

Normal operation; no action is necessary.

Start %1 <%2> with %3 session.

Normal operation; no action is necessary.

Adapter has started successfully.

Normal operation; no action is necessary.

Shutdown the adapter, current status is %1.

Check database connect configuration or other configuration.

Start to reconnect.

Check whether the database connected or not.

Reconnect successfully on attempt %2..

Normal operation; no action is necessary.

The <%1> is an Oracle Streams service. ADB will ignore it during starting up.\n\t

Normal operation; no action is necessary.

There is a same instance startup in the ip: <%1>.

Check if the same instance name is started by another agent.

Received duplication detection request from ip: <%1>, host:<%2>.

Normal operation; no action is necessary.

No service type matched with the service <%1>.

Check the transport type or the service type.

Adapter thread <%1> the field <%2> size <%3> is larger than adb.maxLongLen <%4>.

If you are not sure that you want to stop the adapter, you have to check the data length. To stop the adapter, set the adb.maxLongLen value smaller than the data length; otherwise, set it to -1.

ADB adapter refresh connection timer is started.

Normal operation; no action is necessary.

ADB adapter refresh connection time out.

Normal operation; no action is necessary.

TIBCO Hawk agent is found and agent implementation has been registered.

Normal operation; no action is necessary.

Adapter connection test succeeded in startup.

Normal operation; no action is necessary.

Adapter configuration is parsed.

Normal operation; no action is necessary.

Adapter starts duplicate instance detection with the session <%1>.

Normal operation; no action is necessary.

Create thread <%1> for %2 <%3>.

Normal operation; no action is necessary.

Adapter termination event listener is created with session.

Normal operation; no action is necessary.

Monitor advisory %1 with session <%2>.

Normal operation; no action is necessary.

Adapter reconnection thread is started.

Check whether the database connected or not.

Create dispatcher for session %1.

Normal operation; no action is necessary.

Publication Service <%1> preRegisteredListeners <%2> registered successfully.

Normal operation; no action is necessary.

Subscription Service Thread <%1> CustomScaleForNumberType set successfully for Table Columns: %2.

Normal operation; no action is necessary.

%1 <%2> Catalog:

Normal operation; no action is necessary.

Thread %1 counts down the stop latch.

Normal operation; no action is necessary.

Adapter throw exception %1 when shut down adapter.

Check the error message and the configuration.

Adapter failed to create termination event listener with session <%1>.

Check the configuration.

Adapter failed to reconnect.

Check whether the database connected or not.

Adapter duplication detection error: %1.

Check if the message is null.

Adapter connection test failed in startup.

Check the configuration in the Design-time Connection tab.

ADB adapter stops for no services configured.

Adapter receives one message from termination subject <%1>.

Check if the message is MdataEvent or MexceptionEvent.

Adapter will shutdown.

Check the logs and the configuration.

Adapter termination subject is disabled, so keep running.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> starts polling message.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> publishes message on %3.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> publishes group message on %3.

Normal operation; no action is necessary.

Start alerter for Publication Services.

Normal operation; no action is necessary.

Adapter handles alerter message.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> add one row into the group message.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> begin to refresh connection.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> finish refreshing connection.

Normal operation; no action is necessary.

Thread <%1> get space <%2>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> insert data into <%3>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> start to connect to metaspace <%3>.

Normal operation; no action is necessary.

Thread <%1> create space <%2>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> upsert data into <%3>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> delete data from <%3>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> update data in <%3>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> receives one message.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> receives one message.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> acknowledges one message.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> illegal Group Size %3, Group Messaging disabled, Group Size set to 0.

Normal operation; no action is necessary.

Thread <%1> the space <%2> %3.

Normal operation; no action is necessary.

Publication Service <%1> execute rvcm Advisory Updater...

Normal operation; no action is necessary.

Publication Service <%1> RVCM Batch confirm %2 records.

Normal operation; no action is necessary.

Publication Service <%1> Activate the Polling Timer.

Normal operation; no action is necessary.

Publication Service <%1> Deactivate the Polling Timer.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> execute publishing table mini sequence selector...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> execute (ADB_L_DELIVERY_STATUS or ADB_L_DELIVERY) N -> S marker...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> execute publishing table selector...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> execute reference object selector...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> execute pub table updater...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> polling commit for DB2.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> batch update %3 records.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> polls records without polling timer fired...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> execute fault status updater...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> execute ’S’ to ’N’ updater...

Normal operation; no action is necessary.

Execute listen_alert statement for alerter.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> parses message.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> polling commit for MySql using native driver.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> execute publishing table max sequence selector.

Normal operation; no action is necessary.

Publication Service %1 thread %2 Fetch child data from %3.

Normal operation; no action is necessary.

Publication Service %1 thread %2 execute child selector...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> selects record data from source table.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> selects record data from reference objecct table.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> Start to fetch data from child table.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> Finish fetching data from child table.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2>: no record found...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> auto update status to 'N' statement is: %3

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> auto update status effect data count is <%3>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> the data does not exist in <%3> <%4>

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> the old data in <%3> has changed. <%4>

Normal operation; no action is necessary.

Publication Service %1 thread %2 Publishing Message Info:

Normal operation; no action is necessary.

Publication Service <%1> begin to initialization.

Normal operation; no action is necessary.

Publication Service <%1> create data handler <%2>.

Normal operation; no action is necessary.

Publication Service <%1> data handler <%2> starts...

Normal operation; no action is necessary.

Publication Service <%1> create MTimer for rvcm batch confirm.

Normal operation; no action is necessary.

Publication Service <%1> create MTimer for polling.

Normal operation; no action is necessary.

Publication Service <%1> end to initialization.

Normal operation; no action is necessary.

Create alerter for Publication Services.

Normal operation; no action is necessary.

Initialize alerter for Publication Services.

Normal operation; no action is necessary.

Configure alerter of %1 for Publication Services.

Normal operation; no action is necessary.

Build listen_alert statement for alerter.

Normal operation; no action is necessary.

Publication Service <%1> Activate the RVCM batch confirm timer.

Normal operation; no action is necessary.

Publication Service <%1> Deactivate the RVCM batch confirm timer.

Normal operation; no action is necessary.

Publication Service <%1> Reset RVCM batch confirm timer.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> builds ADB_L_DELIVERY_STATUS or ADB_L_DELIVERY (DB2) N->S marker.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> builds publishing table selector whose ADB_L_DELIVERY_STATUS or ADB_L_DELIVERY (DB2) is S.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> builds publishing table mini sequence selector.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> binds (ADB_L_DELIVERY_STATUS or ADB_L_DELIVERY) N -> S marker...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> builds publishing table selector.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> binds publishing table selector, polling batch size is %3.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> constructs the instance based on the publishing table.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> constructs the instance based on the source table.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> builds reference object selector.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> bind reference object selector.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> construct publisher endpoint.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2>: the group size is %3, the current size is %4.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> builds pub table updater.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> binds pub table updater.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> acquire multithreading semaphore...

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> release multithreading semaphore after marking records...

Normal operation; no action is necessary.

Publication Service <%1> builds rvcm advisory updater.

Normal operation; no action is necessary.

Publication Service <%1> binds rvcm advisory updater.

Normal operation; no action is necessary.

Alerter configuration SQL: %1.

Normal operation; no action is necessary.

Alerter clean up SQL: %1.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> build fault status updater.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> bind fault status updater.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> build ’S’ to ’N’ updater.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> bind ’S’ to ’N’ updater.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> acquire table %3 lock in load balance mode.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> release table %3 lock in load balance mode.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> build child selector.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> bind child selector.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> data: %3

Normal operation; no action is necessary.

Thread <%1> space fields: %2

Normal operation; no action is necessary.

Thread <%1> space attributes: %2

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> builds publishing table max sequence selector.

Normal operation; no action is necessary.

Publication Service %1 thread %2 throw exception %3 when initialize the DBLockMechanism.

Normal operation; no action is necessary.

Publication Thread <%1> when acquire the table lock timeout expired,throws exception %2.when get table lock again,recover to load balance mode.

Normal operation; no action is necessary.

The mutex table %1 is already existed.

Normal operation; no action is necessary.

Publication Service <%1> throw exception <%2> when create rvcm batch confirm timer.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> throw exception <%2> when activate rvcm batch confirm timer.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when get table semaphore in multithreads mode.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when stop the adapter.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> throw exception <%2> when create polling timer.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when build pub load balancing marker.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when build pub load balancing pub table selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when build publishing table mini sequence selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when execute the mini sequence selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when bind pub load balancing marker.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when execute pub load balancing marker.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when build publishing table selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when bind publishing table selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when execute publishing table selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when get dbTable whose name is publishingTableName.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when construct MInstance.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when build reference object selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when bind reference object selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when construct minstance based on publishing table.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when construct minstance based on source table.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when construct minstance based on reference object table.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when fetch child data.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when construct publisher endpoint.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when publish group message.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when build pub table updater.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when bind pub table updater.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when update entry status.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> throw exception %2 when build rvcm advisory updater.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> throw exception %2 when bind rvcm advisory updater.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> throw exception %2 when deactivate the RVCM batch confirm timer.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> throw exception %2 when reset rvcm batch confirm timer.

Check the Publication Service configuration and data in the publishing table.

Main thread throw exception %1 when configure alerter of %2. SQLSTRING : %3.

Check the Publication Service configuration and data in the publishing table.

Main thread throw exception %1 when build listen_alert statement for alerter. SQL String : %2.

Check the Publication Service configuration and data in the publishing table.

Alerter thread throw exception %1 when execute listen_alert statement.

Check the Publication Service configuration and data in the publishing table.

Alerter thread throw exception %1 when clean up alerter. SQL String : %2.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when manipulate fault status updater.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when publish single message.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when manipulate S to N status updater.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> failed to construct minstance based on source table because no data fetched from %3.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> failed to construct minstance based on reference object because no data fetched from %3.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> will cause adapter terminate because the Exception: %3.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when build child selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service <%1> thread <%2> throw exception %3 when bind child selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service %1 thread %2 throw exception %3 when parse the message.

Check the Publication Service configuration and data in the publishing table.

Publication Thread <%1> throws exception %2 when refresh connection.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> throw exception <%3> when connect to metaspace <%4>.

Normal operation; no action is necessary.

Thread <%1> throw exception <%2> when create space <%3>.

Normal operation; no action is necessary.

Thread <%1> throw exception <%2> when get space <%3>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> throw exception <%3> when insert data into <%4>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> throw exception <%3> when upsert data into <%4>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> throw exception <%3> when delete data from <%4>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> throw exception <%3> when update data for <%4>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> throw exception <%3> when format the <%4>.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> failed to connect to metaspace <%3>.

Normal operation; no action is necessary.

Publication Service %1 thread %2 throw exception %3 when create queue connection to the database.

Normal operation; no action is necessary.

Publication Service %1 thread %2 throw exception %3 when create queue session to the database.

Normal operation; no action is necessary.

Publication Service <%1> thread <%2> failed to initialize spaces on the metaspace <%3>.

Normal operation; no action is necessary.

Publication Service %1 thread %2 throw exception %3 when execute the max sequence selector.

Check the Publication Service configuration and data in the publishing table.

Publication Service %1 thread %2 throw exception %3 when build publishing table max sequence selector.

Check the Publication Service configuration and data in the publishing table.

Subscription Service <%1> receive one message.

Normal operation; no action is necessary.

Subscription Service Thread <%1> receive a group message which contain %2 record(s).

Normal operation; no action is necessary.

Subscription Service Thread <%1> receive a single message.

Normal operation; no action is necessary.

Subscription Service Thread <%1> start to handle the %2 item for the group message.

Normal operation; no action is necessary.

Subscription Service Thread <%1> batch commit timeout.

Normal operation; no action is necessary.

Subscription Service Thread <%1> %2 row(s) affected.

Normal operation; no action is necessary.

Subscription Service Thread <%1> send reply \n%2\n to destination %3.

Normal operation; no action is necessary.

Subscription Service Thread <%1> begin to refresh connection.

Normal operation; no action is necessary.

Subscription Service Thread <%1> finish refreshing connection.

Normal operation; no action is necessary.

Subscription Service shared default session <%1> batch commit Information:%2

Normal operation; no action is necessary.

Subscription Service Thread <%1> received its own message. Discarding.

Normal operation; no action is necessary.

Subscription Service Thread <%1> start DB transaction.

Normal operation; no action is necessary.

Subscription Service Thread <%1> commit DB transaction.

Normal operation; no action is necessary.

Subscription Service Thread <%1> roll back DB transaction.

Normal operation; no action is necessary.

Subscription Service Thread <%1> bypass one message.

Normal operation; no action is necessary.

Subscription Service Thread <%1> the statement in cache cannot be reused .

Normal operation; no action is necessary.

Subscription Service Thread <%1> call pre-commit procedure successfully.

Normal operation; no action is necessary.

Subscription Service Thread <%1> create statement.

Normal operation; no action is necessary.

Subscription Service Thread <%1> bind statement.

Normal operation; no action is necessary.

Subscription Service Thread <%1> execute statement.

Normal operation; no action is necessary.

Subscription Service Thread <%1> flush Bulk-Insert.

Normal operation; no action is necessary.

Subscription Service Thread <%1> no data change in the database.

Normal operation; no action is necessary.

Subscription Service Thread <%1> will rollback since %2.

Normal operation; no action is necessary.

Provide a non-null input value for the user key.

Subscription Service Thread <%1> Confirms %2 error message Success.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> Confirming %2 message Successfully.

Normal operation; no action is necessary.

Subscription Service Thread <%1> statement SQL: %2.

Normal operation; no action is necessary.

Subscription Service Thread <%1> will do incremental operation for child records.

Normal operation; no action is necessary.

Subscription Service Thread <%1> will do completion operation for child records.

Normal operation; no action is necessary.

Subscription Service Thread <%1> insert the data %2 into opaque exception table %3.

Normal operation; no action is necessary.

Subscription Service Thread <%1> insert the data %2 into exception table %3.

Normal operation; no action is necessary.

Subscription Service Thread <%1> start handle normal exception

Normal operation; no action is necessary.

Subscription Service Thread <%1> start handle bulk insert error exception

Normal operation; no action is necessary.

Subscription Service Thread <%1> finish handle normal exception

Normal operation; no action is necessary.

Subscription Service Thread <%1> finish handle bulk insert error exception

Normal operation; no action is necessary.

Subscription Service Thread <%1> didn't confirm error message "%2"(TrackingId %3), since this error message can't be inserted into exception/opaque table.

Normal operation; no action is necessary.

Subscription Service Thread <%1> result of pre-commit stored procedure %2 is %3.

Normal operation; no action is necessary.

Subscription Service Thread <%1> statement bounds: %2.

Normal operation; no action is necessary.

Subscription Service Thread <%1> query related child records %2.

Normal operation; no action is necessary.

Subscription Service Thread <%1> delete related child records %2.

Normal operation; no action is necessary.

Subscription Service Thread <%1> cache statement %2 for table %3.

Normal operation; no action is necessary.

Subscription Service Thread <%1> Message body: %2.

Normal operation; no action is necessary.

Subscription Service Thread <%1> deactivate batch commit timer since %2.

Normal operation; no action is necessary.

Subscription Service Thread <%1> activate batch commit timer.

Normal operation; no action is necessary.

Subscription Service <%1>, Message queue ID calculation time: %2.

Normal operation; no action is necessary.

Subscription Service <%1>, Dispatching the message to Queue ID: %2.

Normal operation; no action is necessary.

Subscription Service <%1> thread <%2> set empty string for column <%3>.

Normal operation; no action is necessary.

Subscription Service <%1> Thread <%2> prepare roll back the exception data

Normal operation; no action is necessary.

Subscription Service <%1> Thread <%2> handle <%3> of <%4> need execute data

Normal operation; no action is necessary.

Subscription Service <%1> Thread <%2> handle <%3> of <%4> error data

Normal operation; no action is necessary.

Subscription Service <%1> Thread <%2> handle <%3> of <%4> continue operation data

Normal operation; no action is necessary.

Subscription Service Thread <%1> continue handle bulk insert data

Normal operation; no action is necessary.

Subscription Service <%1> Thread <%2> cache data size <%3>, start handle exception\n %4

Normal operation; no action is necessary.

Subscription Service <%1> Thread <%2> exception cache data size is <%3>, executed successful data size is <%4>

Normal operation; no action is necessary.

Subscription Service <%1> Thread <%2> handle exception data <%3> of <%4>

Normal operation; no action is necessary.

Subscription Service <%1> Thread <%2> handle group exception data <%3> item of <%4>

Normal operation; no action is necessary.

Subscription Service <%1> Thread <%2> execute update count result %3

Normal operation; no action is necessary.

Subscription Service Thread <%1> handle Batch data

Normal operation; no action is necessary.

Subscription Service Thread <%1> can't execute the statement because of the statement is null

Normal operation; no action is necessary.

Subscription Service Thread <%1> the single table opcode %2 is invalid,so discard the single message.

Normal operation; no action is necessary.

Subscription Service Thread <%1> the parent table opcode %2 is invalid,so discard the message.

Normal operation; no action is necessary.

Subscription Service Thread <%1> the child table opcode %2 is invalid,so discard the child table message.

Normal operation; no action is necessary.

Subscription Service Thread <%1> Service <%2> handle <%3> of <%4> need execute data

Normal operation; no action is necessary.

Subscription Service <%1> Thread <%2> cache data size <%3>

Normal operation; no action is necessary.

Subscription Service shared default session <%1> batch commit Information:%2

Normal operation; no action is necessary.

Subscription Service Thread <%1> execute database statement successful count is <%2>

Normal operation; no action is necessary.

Subscription Service Parse the <%1> date time string [%2]

Normal operation; no action is necessary.

Subscription Service Thread <%1> database operation in the batch: batch commit timeout ignored

Normal operation; no action is necessary.

Subscription Service <%1> received unexpected data %2.

Check the message data.

Subscription Service <%1> throw exception %2 when parse data %3.

Check the message data.

Subscription Service <%1> throw exception %2 when calculate queueID for data %3.

Check the message data.

Subscription Service Thread <%1> throw exception %2 when check if the %3 is a kind of group message.

Check the message data.

Subscription Service Thread <%1> throw exception %2 when create statement for Data %3.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> throw exception %2 when terminate adapter.

Check the logs and the configuration.

Subscription Service Thread <%1> throw exception %2 when bind parameter to statement %3.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> throw exception %2 when execute statement %3.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> throw exception %2 when create batch commit timer %3.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> throw exception %2 when handle timeout event.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> call pre-commit procedure unsuccessfully.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> throw exception %2 when serialize the message %3.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> throw exception %2 when activate batch commit timer %2.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> throw exception %2 when deactivate batch commit timer %2.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> handle [%2] : %3.

Check the message data or the table to make sure whether you want this message to throw the exception.

Subscription Service Thread <%1> the exception table is not found.

Check if you set the exception table.

Subscription Service Thread <%1> the opaque exception table is not found.

Check if you set the opaque exception table.

Subscription Service Thread <%1> the child exception table %2 is not found.

Check if you set the child exception table.

Subscription Service Thread <%1> throw exception %2 when begin transaction.

Check the database.

Subscription Service Thread <%1> send reply %2 to destination %3 Error data: %4.

Check the message data.

Subscription Service Thread <%1> throw exception %2 when roll back transaction.

Check the database.

Subscription Service Thread <%1> throw exception %2 when set custom scale.

Check the custom scale.

Subscription Service Thread <%1> throw exception %2 when refresh connection.

Normal operation; no action is necessary.

Subscription Service Thread <%1> can't bing the statement because of the statement is null.

Normal operation; no action is necessary.

Subscription Service Thread <%1> the pre-commit procedure output parameter SP_TEXT is %2.

Normal operation; no action is necessary.

RPC Service Thread <%1> receive data.

Normal operation; no action is necessary.

RPC Service Thread <%1> reply message to %2.

Normal operation; no action is necessary.

RPC Service Thread <%1> Database operated successful.

Normal operation; no action is necessary.

RPC Service Thread <%1> receive one message.

Normal operation; no action is necessary.

RPC Service Thread <%1> Reply Message body is: %2.

Normal operation; no action is necessary.

RPC Service Thread <%1> begin to refresh connection.

Normal operation; no action is necessary.

RPC Service Thread <%1> finish refreshing connection.

Normal operation; no action is necessary.

RPC Service Thread <%1> begin transaction.

Normal operation; no action is necessary.

RPC Service Thread <%1> commit transaction.

Normal operation; no action is necessary.

RPC Service Thread <%1> roll back transaction.

Check the message data and the operation logs.

RPC Service Thread <%1> execute statement.

Normal operation; no action is necessary

RPC Service Thread <%1> create statement.

Normal operation; no action is necessary

RPC Service Thread <%1> statement SQL: %2.

Normal operation; no action is necessary

RPC Service Thread <%1> Confirming message Success.

Normal operation; no action is necessary

Request-Response (Custom mode) Service <%1> initialize Operation <%2>.

Normal operation; no action is necessary

RPC Service Thread <%1> statement binding data: %2.

Normal operation; no action is necessary

<%1> Operation: %2.

Normal operation; no action is necessary

RPC Service Thread <%1> do not found reply subject in the dateEvent.

Check the configuration.

RPC Service Thread <%1> Statement Cached: %2.

Normal operation; no action is necessary.

RPC Service Thread <%1> Receive Message body is: %2.

Normal operation; no action is necessary.

RPC Service Thread <%1> throw exception: %2 when create DB Statement for Data: %3.

Check the message data and the operation logs.

RPC Service Thread <%1> throw exception: %2 when begin transaction.

Check the message data and the operation logs.

RPC Service Thread <%1> throw exception: %2 when execute DB Statement %3.

Check the message data and the operation logs.

RPC Service Thread <%1> throw exception: %2 when commit transaction.

Check the message data and the operation logs.

RPC Service Thread <%1> throw exception: %2 when roll back transaction.

Check the message data and the operation logs.

RPC Service Thread <%1> throw exception: %2 when reply message to %3.

Check the message data and the operation logs.

RPC Service Thread <%1> Database operated unsuccessful.

Check the message data and the operation logs.

RPC Service Thread <%1> throw exception: %2 when get DB procedure %3.

Check the message data and the operation logs.

RPC Service Thread <%1> throw exception: %2 create operation %3.

Check the message data and the operation logs.

RPC Service Thread <%1> throw exception: %2 when parse request %3.

Check the message data and the operation logs.

RPC Service <%1> received unexpected data %2.

Check the message data and the operation logs.

RPC Service <%1> throw exception \n%2\n when refresh connection.

Normal operation; no action is necessary.

RPC Service <%1> throw exception \n%2\n when use attribute name %3 to get the value from the message.

Normal operation; no action is necessary.

Hawk Method %1 is invoked.

Normal operation; no action is necessary.

%1 reconnect attempt %2.

Check the database connection.

%1 reconnect failed on attempt %2.

Check the database connection.

Reconnection thread will sleep %1ms.

Check the database connection.

Oracle client info set successfully in the connection of <%1>...

Normal operation; no action is necessary.

Advisory Handler receives RVCM Advisory on %1.

Normal operation; no action is necessary.

Advisory Handler looks for the matched Publication Service by subject %1.

Normal operation; no action is necessary.

Advisory Handler finds the matched Publication Service %1.

Normal operation; no action is necessary.

Advisory Handler does not find the matched Publication Service.

Normal operation; no action is necessary.

Received RV SYSTEM Advisory on %1 %2.

Normal operation; no action is necessary.

Received SDK error Advisory on %1 %2.

SDK error. Check the logs and the configuration.

Performance Status: %1.

Normal operation; no action is necessary.

Exception: %1.

Check the logs and the configuration.

Got SDK error in method <%1>: Error code: %2 Error Message: %3.

SDK error. Check the logs and the configuration.

Refresh performance logging failed, please enable the performance logging when start the adapter.