| Facade
|
| Port
|
Specifies the port through which the gateway accepts the HTTP requests from the client.
The default value is
9222.
|
| Active Spaces
|
| Transport Type
|
Type of the transport for Global Throttle Manager and Central Logger. Select
AS from the drop-down list.
|
| Metaspace Name
|
The name of the ActiveSpaces Metaspace to connect to. A metaspace is a logical group of spaces—a cluster of hosts and processes that share the same metaspace name and set of discovery transport attributes. The hosts and processes in a metaspace work together by joining the same spaces.
Refer to
TIBCO ActiveSpaces Developer's Guide
for details on Metaspaces.
The default value for the metaspace name is
GTM.
|
| Discovery URL
|
Specifies the discovery URL to use to discover spaces in the cluster. The TCP discovery has the following format:
tcp://ip1[:port1];ip2[:port2],...
where any number of
ip[:port]
well-known addresses can be listed. If no port is specified, the default port number value of
50000 is assumed.
For example,
tcp://127.0.0.1:13000.
Refer to
TIBCO
ActiveSpaces Developer's Guide for details on the discovery URLs.
|
| Listen URL
|
Specifies a URL that is used for direct communication between the members of the metaspace.
To use a listen URL, use a string of the form:
tcp://[interface[:port]]
This syntax specifies that the member should bind to the specified interface and the specified port when creating the TCP socket that will be used for direct communication between the members of the metaspace. If not specified, it will default to
0.0.0.0 (INADDR_ANY) for the interface and to the first available port starting from port
5000 and above.
For example,
tcp://127.0.0.1:13000-*/
|
| Log Level
|
The logging level of the messages when the ActiveSpaces channel is used.
The default value is
INFO.
The possible values are as follows:
INFO
WARN
ERROR
FATAL
FINE
FINER
FINEST
NONE
|
| Log Directory
|
The directory to store the log files. The log files contain the messages when the ActiveSpaces channel is used.
The default value is
ASG_CONFIG_HOME/logs
For example,
C:/TIBCO_HOMEAPIXCONFIG/tibco/cfgmgmt/asg/logs
|
| SSL
|
| Port
|
Specifies the port through which the gateway accepts SSL enabled HTTP requests from client.
The default value is
9233.
|
| Use SSL
|
This is a boolean field which indicates if SSL should be enabled for accepting the HTTPS requests. If this is set to true, SSL is enabled to accept the requests using the HTTPS transport.
|
| Identity Resource
|
Specifies an identity resource which is used by
FacadeHTTPSSLConnection HTTP shared resource to provide the SSL properties.
|
| Identity File Type
|
Specifies the type of identity resource.
The possible values are as follows:
- Identity File
-
Certificate/Private Key
- If
Identity File Type is of the Identity File type, enter the
Identity Type, Identity URL,
and Identity File Password parameters.
- If
Identity File Type is of the Certificate/Private Key type, enter
Certificate URL,
Key URL, and
Key Password parameters.
|
| Identity Type
|
Specifies the type of the keystore if the
Identity File Type is of the Identity File type. The supported values are as follows:
|
| Identity URL
|
Specifies the URL to the identity file if
Identity File Type is of the Identity File type.
For example,
C:\asgserver.pfx
|
| Identity File Password
|
Specifies the password for the identity file used for the SSL connection if
Identity File Type is of the Identity File type.
|
| Certificate URL
|
Specifies the URL to the certificate file if
Identity File Type is of the Certificate/Private Key type.
|
| Key URL
|
Specifies the URL to the private key in the certificate file if
Identity File Type is of the Certificate/Private Key type.
|
| Key Password
|
Specifies the password for the private key used for the SSL connection if
Identity File Type is of the Certificate/Private Key type.
|
| Requires Client Authentication
|
Indicates a Boolean flag to enable or disable mutual SSL authentication for HTTPs transport between the client and the gateway.
When this field is set to
true, the
Trusted Certificates Folder becomes enabled so that you can specify a location containing the list of trusted certificate authorities.
|
| Truststore Password
|
Specifies the password to access the certificate stored in the folder defined by Trusted Certificate Folder field.
|
| Trusted Certificate Folder
|
Specifies a folder containing one or more certificates from trusted certificate authorities, which is required for mutual SSL authentication.
Required when the RequiresClientAuthentication property is set to
true.
|
| JMS Facade ESB Connection
|
| JMS Provider URL
|
Specifies the connection URL for the EMS Server used for facade operation requests from the ESB communication domain. The ESB communication uses JMS transport with XML.
The default value is
tcp://localhost:7222.
|
| JNDI Context URL
|
Specifies the URL to the JNDI service provider used for facade operation requests with ESB communication domain.
The default value is
tibjmsnaming://localhost:7222
|
| Topic Connection Factory Name
|
Specifies the name of TopicConnectionFactory object stored in JNDI. This object is used to create a topic connection with ESB services at the facade side.
The default value is
TopicConnectionFactory.
|
| Queue Connection Factory Name
|
Specifies the name of
QueueConnectionFactory object stored in JNDI. This object is used to create a queue connection with ESB services at the facade side.
The default value is
QueueConnectionFactory.
|
| JNDI Username
|
Specifies the user name for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
The default value is
admin.
|
| JNDI Password
|
Specifies the password for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
|
| JMS Username
|
Specifies the user name for logging into the EMS server in the ESB communication domain at the facade side.
The default value is
admin.
|
| JMS Password
|
Specifies the password for logging into the EMS server in the ESB communication domain at the facade side.
|
| Request Queue
|
Specifies the queue name for an ESB channel (one) communication for the target operation request.
The default value is
asg.out.request.
|
| Reply Queue
|
Specifies the queue name for ESB channel (one) communication for the response from the target operation.
The default value is
asg.out.request.reply.0.0.
|
| JMS Target ESB Connection Primary
|
| JMS Provider URL
|
Specifies the connection URL for the EMS Server used for facade operation requests from ESB communication domain. ESB communication uses JMS transport with XML.
The default value is
tcp://localhost:7222.
|
| JNDI Context URL
|
Specifies the URL to the JNDI service provider used for facade operation requests with ESB communication domain.
The default value is
tibjmsnaming://localhost:7222.
|
| Topic Connection Factory Name
|
Specifies the name of TopicConnectionFactory object stored in JNDI. This object is used to create a topic connection with ESB services at the facade side.
The default value is
TopicConnectionFactory.
|
| Queue Connection Factory Name
|
Specifies the name of QueueConnectionFactory object stored in JNDI. This object is used to create a queue connection with ESB services at the facade side.
The default value is
QueueConnectionFactory.
|
| JNDI Username
|
Specifies the user name for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
The default value is
admin.
|
| JNDI Password
|
Specifies the password for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
|
| JMS Username
|
Specifies the user name for logging into the EMS server in the ESB communication domain at the facade side.
The default value is
admin.
|
| JMS Password
|
Specifies the password for logging into the EMS server in the ESB communication domain at the facade side.
|
| Request Queue
|
Specifies the queue name for an ESB channel (one) communication for the target operation request.
The default value is
asg.out.request.
|
| Reply Queue
|
Specifies the queue name for the ESB channel (one) communication for the response from the target operation.
The default value is
asg.out.request.reply.0.0.
|
| JMS Target ESB Connection Secondary
|
| JMS Provider URL
|
Specifies the connection URL for the EMS Server used for facade operation requests from the ESB communication domain. The ESB communication uses JMS transport with XML.
The default value is
tcp://localhost:7222.
|
| JNDI Context URL
|
Specifies the URL to the JNDI service provider used for facade operation requests with ESB communication domain.
The default value is
tibjmsnaming://localhost:7222.
|
| Topic Connection Factory Name
|
Specifies the name of
TopicConnectionFactory object stored in JNDI. This object is used to create a topic connection with ESB services at the facade side.
The default value is
TopicConnectionFactory.
|
| Queue Connection Factory Name
|
Specifies the name of QueueConnectionFactory object stored in JNDI. This object is used to create a queue connection with ESB services at the facade side.
The default value is
QueueConnectionFactory.
|
| JNDI Username
|
Specifies the user name for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
The default value is
admin.
|
| JNDI Password
|
Specifies the password for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
|
| JMS Username
|
Specifies the user name for logging into the EMS server in the ESB communication domain at the facade side.
The default value is
admin.
|
| JMS Password
|
Specifies the password for logging into the EMS server in the ESB communication domain at the facade side.
|
| Request Queue
|
Specifies the queue name for an ESB channel (one) communication for the target operation request.
The default value is
asg.out.request.
|
| Reply Queue
|
Specifies the queue name for ESB channel (one) communication for the response from the target operation.
The default value is
asg.out.request.reply.0.0.
|
| JMS Target ESB Connection Tertiary
|
| JMS Provider URL
|
Specifies the connection URL for the EMS Server used for facade operation requests from the ESB communication domain. The ESB communication uses JMS transport with XML.
The default value is
tcp://localhost:7222.
|
| JNDI Context URL
|
Specifies the URL to the JNDI service provider used for facade client requests with the ESB communication domain.
The default value is
tibjmsnaming://localhost:7222.
|
| Topic Connection Factory Name
|
Specifies the name of TopicConnectionFactory object stored in JNDI. This object is used to create a topic connection with ESB services at the facade side.
The default value is
TopicConnectionFactory.
|
| Queue Connection Factory Name
|
Specifies the name of QueueConnectionFactory object stored in JNDI. This object is used to create a queue connection with ESB services at the facade side.
The default value is
QueueConnectionFactory.
|
| JNDI Username
|
Specifies the user name for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
The default value is
admin.
|
| JNDI Password
|
Specifies the password for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
|
| JMS Username
|
Specifies the user name for logging into the EMS server in the ESB communication domain at the facade side.
The default value is
admin.
|
| JMS Password
|
Specifies the password for logging into the EMS server in the ESB communication domain at the facade side.
|
| Request Queue
|
Specifies the queue name for an ESB channel (one) communication for the target operation request.
The default value is
asg.out.request.
|
| Reply Queue
|
Specifies the queue name for ESB channel (one) communication for the response from the target operation.
The default value is
asg.out.request.reply.0.0.
|
| JMS SOAP Connection North
|
| JMS Provider URL
|
Specifies the connection URL for the EMS Server used for facade operation requests from the ESB communication domain. The ESB communication uses JMS transport with XML.
The default value is
tcp://localhost:7222.
|
| JNDI Context URL
|
Specifies the URL to the JNDI service provider used for facade client requests with the ESB communication domain.
The default value is
tibjmsnaming://localhost:7222.
|
| Topic Connection Factory Name
|
Specifies the name of TopicConnectionFactory object stored in JNDI. This object is used to create a topic connection with ESB services at the facade side.
The default value is
TopicConnectionFactory.
|
| Queue Connection Factory Name
|
Specifies the name of QueueConnectionFactory object stored in JNDI. This object is used to create a queue connection with ESB services at the facade side.
The default value is
QueueConnectionFactory.
|
| JNDI Username
|
Specifies the user name for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
The default value is
admin.
|
| JNDI Password
|
Specifies the password for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
|
| JMS Username
|
Specifies the user name for logging into the EMS server in the ESB communication domain at the facade side.
The default value is
admin.
|
| JMS Password
|
Specifies the password for logging into the EMS server in the ESB communication domain at the facade side.
|
| Request Queue
|
Specifies the queue name for an ESB channel (one) communication for the target operation request.
The default value is
asg.out.request.
|
| Reply Queue
|
Specifies the queue name for the ESB channel (one) communication for the response from the target operation.
The default value is
asg.out.request.reply.0.0.
|
| JMS SOAP Connection South
|
| JMS Provider URL
|
Specifies the connection URL for the EMS Server used for facade operation requests from the ESB communication domain. The ESB communication uses JMS transport with XML.
The default value is
tcp://localhost:7222.
|
| JNDI Context URL
|
Specifies the URL to the JNDI service provider used for facade client requests with the ESB communication domain.
The default value is
tibjmsnaming://localhost:7222.
|
| Topic Connection Factory Name
|
Specifies the name of TopicConnectionFactory object stored in JNDI. This object is used to create a topic connection with ESB services at the facade side.
The default value is
TopicConnectionFactory.
|
| Queue Connection Factory Name
|
Specifies the name of QueueConnectionFactory object stored in JNDI. This object is used to create a queue connection with ESB services at the facade side.
The default value is
QueueConnectionFactory.
|
| JNDI Username
|
Specifies the user name for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
The default value is
admin.
|
| JNDI Password
|
Specifies the password for logging into the JNDI server in the ESB communication domain at the facade side. If the JNDI provider does not require access control, this field can be empty.
|
| JMS Username
|
Specifies the user name for logging into the EMS server in the ESB communication domain at the facade side.
The default value is
admin.
|
| JMS Password
|
Specifies the password for logging into the EMS server in the ESB communication domain at the facade side.
|
| Request Queue
|
Specifies the queue name for an ESB channel (one) communication for the target operation request.
The default value is
asg.out.request.
|
| Reply Queue
|
Specifies the queue name for an ESB channel (one) communication for the response from the target response.
The default value is
asg.out.request.reply.0.0.
|
| Show SSLProperties
Use the
Show SSL Properties button to configure the SSL connection parameters for JMS transport at the facade and target side.
|
| Use SSL
|
A boolean field to indicate if SSL is enabled for accepting requests using the JMS transport.
Set this to true to enable SSL for the JMS transport.
|
| Trusted Certificate Folder
|
Specifies a location of the trusted certificates on this machine. The trusted certificates are a collection of certificates from servers with which you establish connections. If the server with which the connection is going to be established, presents a certificate that does not match one of your trusted certificates, the connection is refused. This prevents connections to unauthorized servers.
Import the trusted certificates into a folder before you select the folder in this field.
|
| Identity Resource
|
Specifies an identity resource used to provide the SSL properties for JMS transport.
For example,
/DefaultImplementation/SharedResources/JMS/Target_ESB0ConnIdentityResource.id
|
| TrustStorePassword
|
Specifies the password to access the certificate stored in the folder defined by the
Trusted Certificate Folder
field.
|
| Trace
|
Specifies whether SSL tracing should be enabled during the connection. If checked, the SSL connection messages are logged and sent to the console.
|
| Debug Trace
|
Specifies whether SSL debug tracing should be enabled during the connection. Debug tracing provides more detailed messages than standard tracing.
|
| Verify Host Name
|
Specifies whether the host you are connecting to is the expected host. The host name in the host’s digital certificate is compared against the value in the
Expected Host Name field. If the host name does not match the expected host name, the connection is refused.
Note: The default context factories for TIBCO Enterprise Message Service automatically determine if host name verification is necessary. If you are using a custom implementation of the context factories, your custom implementation must explicitly set the verify host property to the correct value. For example:
com.tibco.tibjms.TibjmsSSL.setVerifyHost(false)
|
| Expected Host Name
|
Specifies the name of the host you are expecting to connect to. This field is only relevant if the
Verify Host Name
field is also selected.
If the name of the host in the host’s digital certificate does not match the value specified in this field, the connection is refused.
This prevents hosts from attempting to impersonate the host you are connecting to.
|
| Strong Cipher Suites Only
|
When selected, this field specifies that the minimum strength of the cipher suites used can be specified with the bw.plugin.security.strongcipher.minstrength custom engine property. See TIBCO ActiveMatrix BusinessWorks Administration for more information about this property. The default value of the property disables cipher suites with an effective key length below
128 bits.
When this field is unchecked, only cipher suites with an effective key length of up to
128 bits can be used.
|
| Identity Type
|
Speicifies the type of identity resource. The possible values are:
- certPlusKeyURL
- url
- usernamePassword
|
| Certificate/Private Key Identity
Use this option if the private key and the certificate are in two separate files.
|
| Certificate URL
|
Specifies the URL to the certificate file if the
Identity Type is of the
certPlusKeyURL type.
|
| Key URL
|
Specifies the URL to the private key in the certificate file if the
Identity Type is of the
certPlusKeyURL type.
|
| Key Password
|
Specifies the password for the private key used for SSL connection if the
Identity Type is of the
certPlusKeyURL type.
|
| Username/Password
Use this option if you want to use a username and password for authentication instead of a certificate.
|
| Identity User Name
|
Name of the user for this identity.
|
| Identity Password
|
Password for the user for this identity.
|
| url
Use this option if the certificate includes the private key information in the same file.
|
| Identity URL
|
Specifies the location of the certificate (which includes the private key) if
Identity Type is of
url type.
For example, C:\asgserver.pfx
|
| Identity File Type
|
Specifies the type of certificate file if
Identity Type is of
url type.
Choose the certificate file type from the drop-down list:
- Entrust
- JCEKS
- JKS
- PEM
- PKCS12
|
| Key Password
|
Password for the certificate if
Identity Type is of
url type.
|
