Error Codes
The exceptions that are thrown by the TIBCO ActiveMatrix BusinessWorks™ Plug-in for EDI are listed with the corresponding descriptions and resolutions.
| Error Code and Message | Role | Category | Description | Resolution |
|---|---|---|---|---|
| TIBCO-BW-PALETTE-EDI-501000
The map is required. |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
A translation map is required. | Specify a map to be used for translation. |
| TIBCO-BW-PALETTE-EDI-501001
The input data is required. |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
Input data for translation is required. | Specify input data to be used for translation. |
| TIBCO-BW-PALETTE-EDI-501002
The operation type is required. |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
An operation type is required. | Specify an operation type for translation (e.g., EDItoXML, XMLtoFLAT, etc). |
| TIBCO-BW-PALETTE-EDI-501004
TIBCO-BW-PALETTE-EDI-501004: return code [<return code>], error message : <error message> |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
This error points to a TIBCO Foresight® Translator return code.
For example: TIBCO-BW-PALETTE-EDI-501004:return code [158], error message : Error 44 : Access map failed |
Using the return code provided in the message, refer to the Return Codes section of the TIBCO Foresight® Translator Using Translator PDF document. |
| TIBCO-BW-PALETTE-EDI-501005
BYMEM_MISSINGSTD={0} |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
The selected standard is missing. | Ensure the standard is in the correct location. |
| TIBCO-BW-PALETTE-EDI-501006
METHORD_ERROR={0}{1} |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
An exception occurred during translation. | This is an internal product error. Contact TIBCO Support. |
| TIBCO-BW-PALETTE-EDI-501007
Callback is checked, but no class selected. |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
The Java Callback checkbox is selected, but no class was specified. | Specify a Java Callback class name. |
| TIBCO-BW-PALETTE-EDI-501008
The output directory {0} does not exist. |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
Output directory does not exist in the specified location. | Ensure output directory appears in the specified location. |
| TIBCO-BW-PALETTE-EDI-501009
The output directory is required. |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
An output directory is required. | Specify a valid output directory. |
| TIBCO-BW-PALETTE-EDI-501009
The input file {0} does not exist. |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
Input file does not exist in the specified location. | Ensure input file appears in the specified location. |
| TIBCO-BW-PALETTE-EDI-501010
CallBack selected, but there is no class defined. |
errorRole | EDI-Plug-in
ERROR_TRANSLATOR |
The Java Callback checkbox is selected, but no class is defined. | Define a Java Callback class name. |
| TIBCO-BW-PALETTE-EDI-502000
MESSAGE= return code [<return code>], error message : <error message> |
errorRole | EDI-Plug-in ERROR_RESPGEN | This error points to a ResponseGenerator return code.
For example: TIBCO-BW-PALETTE-EDI-501004:return code [180], error message : Failed to initialize Response Generator. |
Using the return code provided in the message, refer to the Return Codes section of the Response Generator Technical Manual PDF document. |
| TIBCO-BW-PALETTE-EDI-502001
At least one acknowledgment must be selected. |
errorRole | EDI-Plug-in ERROR_RESPGEN | No acknowledgment types are selected. | Select at least one acknowledgment type. |
| TIBCO-BW-PALETTE-EDI-502002
Output directory parameter must be supplied. |
errorRole | EDI-Plug-in ERROR_RESPGEN | An output directory is required. | Specify a valid output directory. |
| TIBCO-BW-PALETTE-EDI-502003
Invalid output directory {0}. |
errorRole | EDI-Plug-in ERROR_RESPGEN | The specified output directory is invalid. | Specify a valid output directory. |
| TIBCO-BW-PALETTE-EDI-502004
Could not configure 997 and 999 at the same time. |
errorRole | EDI-Plug-in ERROR_RESPGEN | A 997 acknowledgment and a 999 acknowledgment cannot be generated simultaneously. | Generate these response documents separately. |
| TIBCO-BW-PALETTE-EDI-502005
Could not configure Control and X12 ACK at the same time. |
errorRole | EDI-Plug-in ERROR_RESPGEN | A CTRL response and an X12 acknowledgment cannot be generated simultaneously. | Generate these response documents separately. |
| TIBCO-BW-PALETTE-EDI-503000
MESSAGE= return code [<return code>], error message : <error message> |
errorRole | EDI-Plug-in ERROR_INSTREAM | This error points to an Instream® return code.
For example: TIBCO-BW-PALETTE-EDI-501004:return code [131], error message : $dir.ini or fsdir.ini cannot be found. |
Using the return code provided in the message, refer to the Return Codes section of the Instream Validation Technical Manual PDF document. |
| TIBCO-BW-PALETTE-EDI-503001
Instream callback missing guideline name. |
errorRole | EDI-Plug-in ERROR_INSTREAM | The Callback checkbox is selected, but no guideline was specified. | Specify a guideline name. |
| TIBCO-BW-PALETTE-EDI-503002
Access input file failed, please check operation mode. |
errorRole | EDI-Plug-in ERROR_INSTREAM | There is a mis-match between the operation mode selected (file or memory) and the input file. | Select the correct Operation Type. |
| TIBCO-BW-PALETTE-EDI-503003
Guideline is required. |
errorRole | EDI-Plug-in ERROR_INSTREAM | A validation guideline is required. | Specify a guideline to be used for validation. |
| TIBCO-BW-PALETTE-EDI-503004
999997=Could not configure 997 and 999 at the same time. |
errorRole | EDI-Plug-in ERROR_INSTREAM | A 997 acknowledgment and a 999 acknowledgment cannot be configured simultaneously. | Configure these response documents separately. |
| TIBCO-BW-PALETTE-EDI-503005
Could not configure Control and X12 ACK at the same time. |
errorRole | EDI-Plug-in ERROR_INSTREAM | A CTRL response and an X12 acknowledgment cannot be configured simultaneously. | Configure these response documents separately. |
| TIBCO-BW-PALETTE-EDI-503006
For document level validation, doconly_parameters parameter must be supplied. |
errorRole | EDI-Plug-in ERROR_INSTREAM | The Document Level Validation checkbox is selected on the General tab but no Separators were specified. | Uncheck Document Level Validation checkbox
OR Specify separators. Refer to document_only_parameters field in Instream. |
| TIBCO-BW-PALETTE-EDI-503007
Invalid output directory [{0}]. |
errorRole | EDI-Plug-in ERROR_INSTREAM | A valid output directory is required. | Specify a valid output directory. |
| TIBCO-BW-PALETTE-EDI-506000
Unsupported encoding [{0}]. |
errorRole | EDI-Plug-in ERROR_X12PRESCANNER | The specified encoding option is not supported. | Ensure a supported encoding type is selected: UTF-8, UTF-16, UTF-16BE, UTF-16LE, ISO-8859-1. |
| TIBCO-BW-PALETTE-EDI-506001
Invalid EDI document. |
errorRole | EDI-Plug-in ERROR_X12PRESCANNER | The specified EDI document is invalid. | Supply a valid EDI document for prescanning. |
| TIBCO-BW-PALETTE-EDI-506100
Unsupported encoding [{0}]. |
errorRole | EDI-Plug-in ERROR_EDIFACTPRESCANNER | The specified encoding option is not supported. | Ensure a supported encoding type is selected: UTF-8, UTF-16, UTF-16BE, UTF-16LE, ISO-8859-1. |
| TIBCO-BW-PALETTE-EDI-506101
Invalid EDIFACT document. |
errorRole | EDI-Plug-in ERROR_EDIFACTPRESCANNER | The specified EDIFACT document is invalid. | Supply a valid EDIFACT document for prescanning. |
| TIBCO-BW-PALETTE-EDI-507000
MESSAGE={0} |
errorRole | EDI-Plug-in ERROR_SHUFFLER | This error points to a Shuffler return code.
For example: TIBCO-BW-PALETTE-EDI-507000:return code [2], error message : STC default file name failed. |
Using the return code provided in the message, refer to the Shuffler Return Codes section of the TIBCO Foresight® Instream® MAC Adapter Introduction PDF document. |
| TIBCO-BW-PALETTE-EDI-507001
Input parameter must be supplied,{0} |
errorRole | EDI-Plug-in ERROR_SHUFFLER | An input file path and name is required. | Specify an input file path and name. |
| TIBCO-BW-PALETTE-EDI-507002
Config parameter must be supplied,{0} |
errorRole | EDI-Plug-in ERROR_SHUFFLER | A configuration file path and name is required. | Specify a configuration file path and name. |
| TIBCO-BW-PALETTE-EDI- 507003
Instream result parameter must be supplied,{0} |
errorRole | EDI-Plug-in ERROR_SHUFFLER | An Instream Detail file path and name is required. | Specify an Instream Detail file path and name. |
| TIBCO-BW-PALETTE-EDI-507004
output file name could not empty. |
errorRole | EDI-Plug-in ERROR_SHUFFLER | An output file name is required. | Specify a name for the output file. |
| TIBCO-BW-PALETTE-EDI-507009
Open STC files {0} failed. |
errorRole | EDI-Plug-in ERROR_SHUFFLER | The specified STC file could not be opened. | Ensure the permissions on the file allow open access. |
| TIBCO-BW-PALETTE-EDI-507010
Open map file {0} failed. |
errorRole | EDI-Plug-in ERROR_SHUFFLER | The specified map file could not be opened. | Ensure the permissions on the file allow open access. |
| TIBCO-BW-PALETTE-EDI-507011
Open instream result file {0} failed. |
errorRole | EDI-Plug-in ERROR_SHUFFLER | The specified Instream result file could not be opened. | Ensure the permissions on the file allow open access. |
| TIBCO-BW-PALETTE-EDI-507012
Read instream result file {0} failed. |
errorRole | EDI-Plug-in ERROR_SHUFFLER | The specified Instream result file could not be read. | Ensure the permissions on the file allow open access. |
| TIBCO-BW-PALETTE-EDI-507013
Parsing input data failed. |
errorRole | EDI-Plug-in ERROR_SHUFFLER | The input data could not be parsed. | Ensure input file formatting is valid. |
| TIBCO-BW-PALETTE-EDI-507014
Parse table {0} failed {1}. |
errorRole | EDI-Plug-in ERROR_SHUFFLER | DEBUG_MESSAGE ONLY | N/A |
| TIBCO-BW-PALETTE-EDI-507015
{0} {1} |
errorRole | EDI-Plug-in ERROR_SHUFFLER | DEBUG_MESSAGE ONLY | N/A |
| TIBCO-BW-PALETTE-EDI-507017
Open output file {0} failed. |
errorRole | EDI-Plug-in ERROR_SHUFFLER | The specified output file could not be opened. | Ensure the permissions on the file allow open access. |
| TIBCO-BW-PALETTE-EDI-508000
{0}Config parameter must be supplied. |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | A configuration file path and name is required. | Specify a file path and name for the configuration file. |
| TIBCO-BW-PALETTE-EDI-508001
Input parameter must be supplied. |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | An input file path and name is required. | Specify a file path and name for the input file. |
| TIBCO-BW-PALETTE-EDI-508002
INVALIDARGUMENT_MESSAGE={0} |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | One or more arguments are invalid. | Refer to the supporting text, which appears in {0} for more information. |
| TIBCO-BW-PALETTE-EDI-508003
File {0} could not be opened. |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | The specified file could not be opened. | Ensure the permissions on the file allow open access. |
| TIBCO-BW-PALETTE-EDI-508004
IOException {0}. |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | An IOException occurred. | This is an internal product error. Contact TIBCO Support. |
| TIBCO-BW-PALETTE-EDI-508005
{0} |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | This error points to a ISErrorRefiner return code.
For example: TIBCO-BW-PALETTE-EDI-508005:return code [4], InStream results file must start with a VERsion record. (at line # n)" |
Using the return code provided in the message, refer to the ISErrorRefiner Return Codes section of the ISErrorRefiner PDF document. |
| TIBCO-BW-PALETTE-EDI-508006
Illegal severity value {0} found in input file. Unable to continue. |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | The input file contains one or more invalid Error Severity codes. | Analyze the input file for invalid Error Severity codes (i.e., codes less than zero or greater than 6). |
| TIBCO-BW-PALETTE-EDI-508007
Illegal type value {0} found in input file. Unable to continue. |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | The input file contains one or more invalid HIPAA Type codes. | Analyze the input file for invalid HIPAA Type codes (i.e., codes less than zero or greater than 8). |
| TIBCO-BW-PALETTE-EDI-508008
STRUCT={0} |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | A structure-related error has occurred. | Refer to the supporting text, which appears in {0} for more information. |
| TIBCO-BW-PALETTE-EDI-508009
RESULTFILE={0} |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | A result file-related error has occurred. | Refer to the supporting text, which appears in {0} for more information. |
| TIBCO-BW-PALETTE-EDI-508010
Error on loading configure file {0} |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | The specified configuration file could not be loaded. | Ensure the configuration file is valid. |
| TIBCO-BW-PALETTE-EDI-508011
Access configure file {0} failed. |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | The specified configuration file could not be accessed. | Ensure the configuration file appears in the specified location. |
| TIBCO-BW-PALETTE-EDI-508020
The output directory is required. |
errorRole | EDI-Plug-in ERROR_ERRORREFINER | An output directory is required. | Specify a valid output directory. |
| TIBCO-BW-PALETTE-EDI-509000
Input parameter must be supplied. |
errorRole | EDI-Plug-in ERROR_DOCSPLITTER | No Input Mode parameter was selected. | Select an Input Mode parameter: File or Memory. |
| TIBCO-BW-PALETTE-EDI-509001
InstreamResult parameter must be supplied. |
errorRole | EDI-Plug-in ERROR_DOCSPLITTER | An Instream Detail file path and name is required. | Specify a file path and name for the Instream Detail file. |
| TIBCO-BW-PALETTE-EDI-509002
{0} |
errorRole | EDI-Plug-in ERROR_DOCSPLITTER | This error points to a DocumentSplitter return code.
For example: TIBCO-BW-PALETTE-EDI-509002 :return code [205], Docsplitter could not open the INI config file. |
Using the return code provided in the message, refer to the DocumentSplitter Return Codes section of the Document Splitter PDF document. |
| TIBCO-BW-PALETTE-EDI-509003
Output parameter must be supplied. |
errorRole | EDI-Plug-in ERROR_DOCSPLITTER | No Output Mode parameter was selected. | Select an Output Mode parameter: File or Memory. |
| TIBCO-BW-PALETTE-EDI-509004
Invalid output directory {0}. |
errorRole | EDI-Plug-in ERROR_DOCSPLITTER | The specified output directory is invalid. | Specify a valid output directory. |