Copyright © Cloud Software Group, Inc. All Rights Reserved

Services Reference

The Adapter Services folder contains four adapter services for drag-and-drop configuration. This chapter is a reference to these services. For information on creating an adapter services, see Adding Services to Your Adapter.

Publication Service

When you choose a publication service, the configuration panel allows you to specify information in the following:

•	Configuration Tab

•	Transport Tab (Rendezvous Transport)

•	Transport Tab (JMS Transport)

•	Schema Tab

Configuration Tab

 

Table 50 Configuration Tab Field

Name	Name of the service.
Description	Optional description of the service.
Transport Type	Either Rendezvous for TIBCO Rendezvous or JMS for TIBCO Enterprise Message Service. The transport type you choose affects the contents of the Transport tab.

Transport Tab (Rendezvous Transport)

 

Table 51 Rendezvous Transport Tab Field

Message Subject	Subject with which this publisher will send out messages. Do not change the subject unless you understand TIBCO Rendezvous requirements.
Reply Message Subject	Reply subject for this publication service.
Quality of Service	Choose Certified (the default), Reliable, or Transactional to create a service of that type.
Wire Format	Choose Active Enterprise Message, Rendezvous Message or XML Message, depending on the format the application to which the adapter publishes requires.
Session Reference	When you create a service, TIBCO Designer creates a corresponding session resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom session of the same type, you can click the Browse icon to replace the autocreated session. Note: It is not usually appropriate to change the session for a service. Edit the service instead.
Endpoint Reference	When you create a service, TIBCO Designer creates a corresponding endpoint resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom endpoint of the same type, you can click the Browse icon to replace the autocreated endpoint. Note: It is not usually appropriate to change the endpoint for a service. Edit the service instead.

Transport Tab (JMS Transport)

 

Table 52 JMS Transport Tab Field

Destination	Topic or queue to which you wish to send the message.
Reply Destination	Topic or queue where reply messages are sent.
Wire Format	If a JMS transport is used, the wire format is always XML Message.
Connection Factory Type	Choose Queue or Topic.
Delivery Mode	Choose Persistent or Non-Persistent.
Session Reference	When you create a service, TIBCO Designer creates a corresponding session resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom session of the same type, you can click the Browse icon to replace the autocreated session. Note: It is not usually appropriate to change the session for a service. Edit the service instead.
Endpoint Reference	When you create a service, TIBCO Designer creates a corresponding endpoint resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom endpoint of the same type, you can click the Browse icon to replace the autocreated endpoint. Note: It is not usually appropriate to change the endpoint for a service.

Schema Tab

Each service must be associated with schema that describe the data the service sends or receives. Click the Browse icon to associate the schema that describe the data the service actually sends or receives.

Subscription Service

When you choose a publication service, the configuration panel allows you to specify information in three tabs (only one of the Transport Tabs will be available):

•	Configuration Tab

•	Transport Tab (TIBCO Rendezvous Transport)

•	Transport Tab (JMS Transport)

•	Schema Tab

Configuration Tab

 

Table 53 Configuration Tab Field

Name	Name of the service.
Description	Optional description of the service.
Transport Type	Either Rendezvous for TIBCO Rendezvous or JMS for TIBCO Enterprise Message Service. The transport type you choose affects the contents of the Transport tab.

Transport Tab (TIBCO Rendezvous Transport)

 

Table 54 TIBCO Rendezvous Transport Tab Field

Message Subject	Subject on which this subscriber will listen for messages. Do not change the subject unless you understand TIBCO Rendezvous.
Quality of Service	Choose Certified (the default), Reliable, Transactional, or Distributed Queue to create a service of that type.
Wire Format	Choose Active Enterprise Message, Rendezvous Message, or XML Message depending on the format of the application to which the adapter publishes requires.
Session Reference	When you create a service, TIBCO Designer creates a corresponding session resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom session of the same type, you can click the Browse icon to replace the autocreated session. Note: It is not usually appropriate to change the session for a service. Edit the service instead.
Endpoint Reference	When you create a service, TIBCO Designer creates a corresponding endpoint resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom endpoint of the same type, you can click the Browse icon to replace the autocreated endpoint. Note: It is not usually appropriate to change the endpoint for a service. Edit the service instead.

Transport Tab (JMS Transport)

 

Table 55 JMS Transport Tab Field

Destination	Topic or queue from which you receive messages.
Wire Format	If a JMS transport is used, the wire format is always XML Message.
Connection Factory Type	Choose Queue or Topic.
Delivery Mode	Choose Durable or Non-Durable.
Session Reference	When you create a service, TIBCO Designer creates a corresponding session resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom session of the same type, you can click the Browse icon to replace the autocreated session. Note: It is not usually appropriate to change the session for a service. Edit the service instead.
Endpoint Reference	When you create a service, TIBCO Designer creates a corresponding endpoint resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom endpoint of the same type, you can click the Browse icon to replace the autocreated endpoint. Note: It is not usually appropriate to change the endpoint for a service. Edit the service instead.

Schema Tab

Each service must be associated with schema that describe the data the service sends or receives. Click the Browse icon to associate the schema that describe the data the service actually sends or receives.

Request-Response Invocation Service

An ActiveEnterprise request-response invocation service takes on the role of the client in an ActiveEnterprise operation. Provide the information for the following tabs to configure the service:

•	Configuration Tab

•	Transport Tab (TIBCO Rendezvous Transport)

•	Transport Tab (JMS Transport)

•	Schema Tab

Configuration Tab

 

Table 56 Configuration Tab Field

Name	Name of the request-response invocation service.
Description	Optional description of the service.
Transport Type	Either Rendezvous for TIBCO Rendezvous or JMS for TIBCO Enterprise Message Service. The transport type you choose affects the contents of the Transport tab.

Transport Tab (Rendezvous Transport)

 

Table 57 Rendezvous Transport Tab Field

Message Subject	Subject with which this publisher will send out messages. Do not change the subject unless you understand TIBCO Rendezvous.
Quality of Service	Choose certified or reliable, depending on the level of reliability you require.
Wire Format	For ActiveEnterprise operations, only ActiveEnterprise Message format is allowed.
Session Reference	When you create a service, TIBCO Designer creates a corresponding session resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom session of the same type, you can click the Browse icon to replace the autocreated session. Note: It is not usually appropriate to change the session for a service. Edit the service instead.
Endpoint Reference	When you create a service, TIBCO Designer creates a corresponding endpoint resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom endpoint of the same type, you can click the Browse icon to replace the autocreated endpoint. Note: It is not usually appropriate to change the endpoint for a service. Edit the service instead.

Transport Tab (JMS Transport)

 

Table 58 JMS Transport Tab

Destination	Topic or queue to which you wish to send the message.
Wire Format	If a JMS transport is used, the wire format is always XML Message.
Connection Factory Type	Choose Queue or Topic.
Delivery Mode	Choose Persistent or Non-Persistent.
Session Reference	When you create a service, TIBCO Designer creates a corresponding session resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom session of the same type, you can click the Browse icon to replace the autocreated session. Note: It is not usually appropriate to change the session for a service. Edit the service instead.
Endpoint Reference	When you create a service, TIBCO Designer creates a corresponding endpoint resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom endpoint of the same type, you can click the Browse icon to replace the autocreated endpoint. Note: It is not usually appropriate to change the endpoint for a service. Edit the service instead.

Schema Tab

Each service must be associated with schema that describe the data the service sends or receives. Click the Browse icon to associate the schema that describe the data the service actually sends or receives.

Request-Response Service

An ActiveEnterprise request-response service takes on the role of the server in an ActiveEnterprise operation. Provide the information for the following tabs to configure the service:

•	Configuration Tab

•	Transport Tab (TIBCO Rendezvous Transport)

•	Transport Tab (JMS Transport)

•	Schema Tab

Configuration Tab

 

Table 59 Configuration Tab Field

Name	Name of the service.
Description	Optional description of the service.
Transport Type	Either Rendezvous for TIBCO Rendezvous or JMS for TIBCO Enterprise Message Service. The transport type you choose affects the contents of the Transport tab.

Transport Tab (Rendezvous Transport)

 

Table 60 Rendezvous Transport Tab

Message Subject	Subject on which this subscriber will listen for messages. Do not change the subject unless you understand TIBCO Rendezvous.
Quality of Service	Choose Certified (the default), Reliable, or Distributed Queue to create a service of that type.
Wire Format	For ActiveEnterprise operations, only ActiveEnterprise Message format is allowed.
Session Reference	When you create a service, TIBCO Designer creates a corresponding session resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom session of the same type, you can click the Browse icon to replace the autocreated session. Note: It is not usually appropriate to change the session for a service. Edit the service instead.
Endpoint Reference	When you create a service, TIBCO Designer creates a corresponding endpoint resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom endpoint of the same type, you can click the Browse icon to replace the autocreated endpoint. Note: It is not usually appropriate to change the endpoint for a service. Edit the service instead.

Transport Tab (JMS Transport)

 

Table 61 JMS Transport Tab

Destination	Topic or queue from which the message is coming.
Wire Format	If a JMS transport is used, the wire format is always XML Message.
Connection Factory Type	Choose Queue or Topic.
Delivery Mode	Choose Durable or Non-Durable.
Session Reference	When you create a service, TIBCO Designer creates a corresponding session resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom session of the same type, you can click the Browse icon to replace the autocreated session. Note: It is not usually appropriate to change the session for a service.
Endpoint Reference	When you create a service, TIBCO Designer creates a corresponding endpoint resource in the Sessions folder of the Advanced folder and displays it in this field. If you have explicitly created a custom endpoint of the same type, you can click the Browse icon to replace the autocreated endpoint. Note: It is not usually appropriate to change the endpoint for a service.

Schema Tab

Each service must be associated with schema that describe the data the service sends or receives. Click the Browse icon to associate the schema that describe the data the service actually sends or receives.

Copyright © Cloud Software Group, Inc. All Rights Reserved