Error and Status Codes
| Admin command failed | |
|---|---|
| Description | An admin tool or program using the admin API attempted an operation that failed for the given reason. |
| Resolution | The admin tool or admin API provides the failure reason. The user of the tool or API should examine the error and correct the syntax, parameter or configuration that is causing the failure. |
| Errors |
Attempt by user %s to %s failed due to lack of permissions %s: create %s failed: conflicting zone: existing consumer has a different zone %s: create %s failed: detected duplicate durable subscription [%s] for topic [%s]. %s: create %s failed: illegal to use wildcard %s [%s]. %s: create %s failed: invalid %s [%s]. %s: create %s failed: invalid session id=%d. %s: create %s failed: invalid syntax of %s [%s]. %s: create %s failed: invalid temporary %s [%s]. %s: create %s failed: not allowed to create dynamic %s [%s]. Invalid consumer in recover one msg request. Invalid sequence number in recover one msg request. |
| Authentication error | |
|---|---|
| Description | The EMS server failed to authenticate the user or password. |
| Resolution | Ensure the user is defined to EMS by one of the methods allowed by the user_auth parameter in the main configuration file. The user is either specified by the application or in the SSL certificate. If the user is defined, reset the password and try again. |
| Errors |
Unable to initialize connection, SSL username error. LDAP authentication failed for user '%s', status = %d - %s LDAP authentication failed for user '%s', LDAP server not found. LDAP authentication failed for user '%s', no password provided |
| Bad or missing value for command line parameter | |
|---|---|
| Description | An invalid value was supplied for a command line parameter. |
| Resolution | Change the value of the named parameter to an acceptable value; for information about tibemsd command line parameters, see EMS documentation. |
| Errors |
'%s' requires an integer argument. '%s' requires a positive integer argument. '%s' requires a string argument. Pathmap is only supported when using a JSON configuration file. Cannot open pathmap file '%s': file not found or permission denied. Invalid pathmap entry '%s'. |
| Basic initialization failed | |
|---|---|
| Description | tibemsd was unable to start. |
| Resolution | Correct the configuration or startup parameters and restart. |
| Errors |
Unable to add admin user into admin group: error=(%d) %s Fault tolerant activation has to be greater than 2x heartbeat Server heartbeat client should be non-zero and no more than a third of the client timeout server connection Server heartbeat server should be non-zero and no more than a third of the server timeout server connection Client heartbeat server should be non-zero and no more than a third of the server timeout client connection Fault Tolerant configuration error, can't create loop. Fault tolerant connection failed, fault tolerant mode not supported on '%s'. Fault tolerant heartbeat has to be greater than 0 Initialization failed due to errors in configuration. Initialization failed due to errors in SSL. Initialization failed due to errors with transports. Initialization failed. Exiting. Initialization has failed. Exiting. Initialization of thread pool failed (%s). Exiting. Startup aborted. Server failed to read configuration. Initialization failed: storage for '%s' not found. Failure initializing storage thread: %s. Ignoring condition %s in startup_abort_list: not supported on this platform. Ignoring condition ALL in startup_abort_list: not supported on this platform. Using condition SSL instead. Initialization failed due to errors with multicast. Configuration error: dbstore_driver_name for store [%s] cannot be empty Configuration error: dbstore_driver_url for store [%s] cannot be empty Configuration error: dbstore_driver_dialect for store [%s] cannot be empty Configuration error: dbstore_driver_username for store [%s] must be specified Configuration error: dbstore_driver_password for store [%s] must be specified Error Loading JVM: %s Unknown Error Loading JVM Trying JVM location: %s Error Loading JVM: %s Unknown Error Loading JVM Unable to create default store '%s': %d - %s $sys.meta store's type must be 'file' or 'dbstore'. Configuration error: file=%s, line=%d: The parameter '%s' is not supported on this platform Unable to bind network IO thread: %d to Processor Id: %d. Exiting! Unable to bind storage thread for store '%s' to Processor Id: %d. Exiting! Unable to start Network IO Thread(s). Error: %d - %s |
| Commit failed due to prior failure or after fault-tolerant switch | |
|---|---|
| Description | A warning message indicating that the commit of a client application's transaction failed either because there were earlier errors when processing this transaction or because the transaction was started on the active server prior to a fault-tolerant failover. |
| Resolution | The client application should retry the transaction. |
| Errors |
Commit failed due to prior failure or after fault-tolerant switch. |
| Compaction failed | |
|---|---|
| Description | Compaction of the store file failed. |
| Resolution | The most likely cause of this error is running out of memory. Shut down tibemsd and see remedies for Out of memory. |
| Errors |
Compaction of store '%s' failed: %d (%s). Please shutdown and restart tibemsd. Compaction of store '%s' failed: %d (%s). Initialization of file_destination_defrag feature failed for queue '%s' (store '%s') due to an out of memory condition. Feature is disabled. file_destination_defrag of queue '%s' (store '%s') failed: %d (%s). |
| Configured durable differs from stored one | |
|---|---|
| Description | The durables configuration file specifies a durable with a given name and client identifier with attributes that are different from the identically named durable found in the meta.db file. |
| Resolution | Correct the durables configuration file to match the durable defined in the meta.db file or administratively delete the durable and re-define it. |
| Errors |
Configured durable '%s' differs from durable in storage, storage version used. |
| Create of global routed topic failed: not allowed to create dynamic topic | |
|---|---|
| Description | A server received an interest notification from another server that does not match the allowed topics in its configuration. |
| Resolution | This only is printed when the trace includes ROUTE_DEBUG. If the server's topic definitions are as expected, this statement can be ignored or remove the ROUTE_DEBUG trace specification to prevent printing. |
| Errors |
Create of global routed topic failed: not allowed to create dynamic topic [%s]. |
| Create of routed queue failed: not allowed to create dynamic queue | |
|---|---|
| Description | A warning indicating that a tibemsd with a route to this daemon has a queue configured to be global but this daemon does not permit the creation of that queue dynamically. |
| Resolution | Add the specified queue or a pattern that includes it to this daemon if you want the queue to be accessible from this daemon, otherwise the warning can be ignored. |
| Errors |
Create of routed queue failed: not allowed to create dynamic queue [%s]. |
| Database record damaged | |
|---|---|
| Description | An error occurred reading one of the tibemsd store files. |
| Resolution | Send details of the error and the situation in which it occurred to TIBCO Support. |
| Errors |
Server failed to recover state. |
| Database Stores Setup Errors | |
|---|---|
| Description | In a database stores setup, errors occuring at runtime |
| Resolution | Check your database server vendor and database administrator for failures occuring during writes,deletes,reads of different records, for failures occuring during database store open check with the database administrator for permissions and the existence of the database. For failures occuring during a FT setup where all the stores are database stores, please check with the database server vendor or database administrator. In the case where both are active, we recommend shutting down both the servers and investigating the problem. |
| Errors |
Unable to open store [%s]: [ ESTATUS = %d, ERRSTR = %s ] Failed to store message record in store [%s]: [ ESTATUS = %d, ERRSTR = %s ] Failed to write ack record in store [%s]: [ ESTATUS = %d, ERRSTR = %s ] Failed to write txn record in store [%s]: [ ESTATUS = %d, ERRSTR = %s ] Failed to update txn record in store [%s]: [ ESTATUS = %d, ERRSTR = %s ] No memory to create no hold list for valid msgs record No memory to create hold list for valid msgs record No memory to create held list for valid msgs record Failed to write valid msg record in store [%s]: [ ESTATUS = %d, ERRSTR = %s ] Failed to update msg record with record id [% PRINTF_LLFMT d] in store [%s]: [ ESTATUS = %d, ERRSTR = %s ] Failed to delete %s record id = % PRINTF_LLFMT d : [ ESTATUS = %d, ERRSTR = %s ] Failed to read message with store id = % PRINTF_LLFMT d: [ ESTATUS = %d, ERRSTR = %s ] Failed to initialize dbstore [%s]: [ ERRSTR = %s ] Failed to open store [%s], error = %s Unable to restore %s records from store [%s]: [ ESTATUS = %d, ERRSTR = %s ] Failed to delete meta record: [ ESTATUS = %d, ERRSTR = %s ] Failed to beginTransaction: [ ESTATUS = %d, ERRSTR = %s ] Failed to read message with store id = % PRINTF_LLFMT d: [ ESTATUS = %d, ERRSTR = %s ] Store [%s] locked by server %s Store [%s] cannot be locked by server %s Failed to store txn record: [ txn id = % PRINTF_LLFMT d, ESTATUS = %d ] Failed to update txn record: [ txn record id = % PRINTF_LLFMT d, ESTATUS = %d ] Exception while processing msg from database store [%s], error = %d Failed to write meta record: [ ESTATUS = %d, ERRSTR = %s ] Failed to update meta record: [ ESTATUS = %d, ERRSTR = %s ] Failed to write connection record: error = %d Failed to write session record: error = %d Failed to write consumer record: error = %d Failed to write producer record: error = %d Failed to write zone record: error = %d Failed to update connection record: error = %d Failed to update consumer record: error = %d Failed to write purge record: [ ESTATUS = %d, ERRSTR = %s ] Commit Transaction Failed [ ESTATUS = %d, ERRSTR = %s ] No Memory to create lock manager: Store [%s] cannot be locked by server %s Could not find system record for store [%s] |
| Durable consumer was found in the store file for a route that does not exist | |
|---|---|
| Description | On server startup a durable consumer was found in the store file for a route that is not listed in the routes.conf file. This happens if the routes.conf file is manually edited. |
| Resolution | Make routing changes via administration tools. |
| Errors |
Discarding durable '%s' for route '%s' because the route does not exist. |
| Dynamic Module Loading Errors | |
|---|---|
| Description | An error occurred when loading or using a shared library module. |
| Resolution | Module loading is affected by the presence of shared libraries in the module path. Use the +load tracing flag to get more information about how the server is loading modules. See the section on Starting the EMS Server for more details. |
| Errors |
Problem loading %s: %s Unknown problem loading %s. Loaded %s Problem binding %s: %s Unknown problem binding %s. Unable to locate %s Fatal error: Returned from exec(), errno = %d OpenSSL library version mismatch tibftl_transports not supported |
| Duplicate message detected | |
|---|---|
| Description | Warning generated when tibemsd receives a message with a message id that matches another message's message id. |
| Resolution | Only seen when message id tracking is enabled. |
| Errors |
Detected duplicate %s message, messageID='%s' |
| Destination backlog growth detected | |
|---|---|
| Description | Warning generated when a destination appears to be growing an unwieldy backlog of messages. |
| Resolution | Consume or purge a large number of messages from that destination. |
| Errors |
Destination growing very large: name=%s type=%s msg_count=%lld dest_size=%lld (bytes) num_consumers=%d inbound_rate=%d (bytes/s) outbound rate=%d (bytes/s) Destination growing very large: name=%s type=%s msg_count=%lld dest_size=%lld (bytes) num_consumers=%d inbound_rate=statistics_disabled outbound_rate=statistics_disabled The server will attempt to trace warnings about destinations that are growing unbounded above %lld bytes or %lld messages. The server will attempt to trace warnings about destinations that are growing unbounded above %lld %s. Set server properties 'large_destination_memory' and 'large_destination_count' respectively to alter these thresholds. Set server property '%s' to alter this threshold. |
| Error in configuration file | |
|---|---|
| Description | The server encountered an invalid configuration statement in the specified configuration file on the specified line. |
| Resolution | Examine the appropriate configuration file and correct the syntax error. |
| Errors |
Configuration warning: file=%s, line=%d: route '%s' does not have a user configured for authorization. SSL Configuration error: file=%s, line=%d: invalid certificate file name, unknown extension or invalid encoding specification Configuration error: file=%s, line=%d: illegal to specify %s for routed queue Configuration error: file=%s, line=%d: bad destination specification: %s Configuration warning: file=%s, line=%d: illegal to specify prefetch=none for global or routed queue. Prefetch reset to default. Configuration warning: file=%s, line=%d: illegal to specify prefetch=none for topic. Prefetch reset to default. Configuration error: file=%s, line=%d: ignored alias '%s' for %s '%s' because such alias already exists Configuration error: The specified file '%s' is empty or does not exist Configuration error: file=%s, line=%d: both tibrv_export and tibrvcm_export are specified, ignoring tibrv_export Configuration error: file=%s, line=%d: ignoring transport '%s' in %s list, transport not found Configuration error: file=%s, line=%d: multiple bridge entries for the same destination '%s' are not allowed. Configuration error: file=%s, line=%d: Ignoring durable, name cannot start with $sys.route, use route property instead. Configuration error: file=%s, line=%d: Rendezvous transport not specified for Rendezvous CM transport '%s' Configuration error: file=%s, line=%d: ignoring invalid max connections in the line, reset to %s Configuration error: file=%s, line=%d: ignoring invalid max_client_msg_size in the line, reset to unlimited Configuration error: file=%s, line=%d: value of %s out of range, reset to default Configuration error: max_msg_field_print_size >= max_msg_print_size, resetting both to default Configuration error: file=%s, line=%d: unable to create %s '%s': invalid destination name, invalid parameters or out of memory Configuration error: file=%s, line=%d: value of db_pool_size too big or less than allowed minimum, reset to default value of %d bytes Configuration error: file=%s, line=%d: Ignoring durable, route does not allow clientid, selector or nolocal. Configuration error: file=%s, line=%d: Route '%s' does not exist for configured durable. Configuration error: file=%s, line=%d: unable to process selector in route parameters, error=%s Configuration error: file=%s, line=%d: both tibrv_import and tibrvcm_import are specified, ignoring tibrv_import Configuration error: file=%s, line=%d: ignored route '%s' because route represents route to this server. Configuration error: file=%s, line=%d: ignoring invalid topic selector specifications in route parameters Configuration error: file=%s, line=%d: value of max_msg_memory less than allowed, reset to %dMB Configuration error: file=%s, line=%d: ignored alias '%s' for factory because such alias already exists Configuration error: file=%s, line=%d: invalid certificate file name, unknown extension or invalid encoding specification Configuration error: file=%s, line=%d: ignored route '%s' because route has invalid zone information. Configuration error: file=%s, line=%d: ignored route '%s' because route with such name or URL already exists. Configuration error: file=%s, line=%d: value of msg_pool_size invalid or too big or less than allowed minimum of %d, reset to default value of %d SSL Configuration error: file=%s, line=%d: invalid private key file name, unknown extension or invalid encoding specification Configuration conflict: file=%s, line=%d: value of msg_pool_block_size already set at line=%d. Ignoring msg_pool_size. Configuration error: file=%s, line=%d: bridge has no targets, unable to process Configuration error: file=%s, line=%d: Illegal to specify routed queue as a bridge source Configuration error: file=%s, line=%d: $TMP$.> cannot be bridge source or target destination Configuration error: file=%s, line=%d: A temporary destination cannot be bridge source or target destination Configuration error: file=%s, line=%d: client_trace error: %s Configuration error: file=%s, line=%d: %s Configuration error: %shealth_check_listen is malformed - %s Configuration error: file=%s, line=%d: duplicate specification of transport type Configuration error: file=%s, line=%d: duplicate value Configuration error: file=%s, line=%d: Ignoring durable, duplicate of earlier entry. Configuration error: file=%s, line=%d: Ignoring durable, name is invalid. Configuration error: file=%s, line=%d: Ignoring durable, name is missing or invalid. Configuration error: file=%s, line=%d: Ignoring durable, topic is invalid. Configuration error: file=%s, line=%d: Ignoring durable, topic is missing or invalid. Configuration error: file=%s, line=%d: Ignoring durable, durable subscriptions not supported on temporary destination wildcard $TMP$.>. Configuration error: file=%s, line=%d: error in the bridge description, unable to proceed. Configuration error: file=%s, line=%d: error in permissions Configuration error: file=%s, line=%d: error in the transport description, unable to proceed. Configuration error: file=%s, line=%d: errors in line, some options may have been ignored Error: unable to add bridge specified in file=%s, line=%d. Error=%s Configuration error: file=%s, line=%d: Unable to create destination defined by the bridge source Unable to create Rendezvous Certified transport '%s' because it references undefined Rendezvous transport '%s' Configuration error: file=%s, line=%d: failed to create ACL entry, reason=%s Unable to export message to SmartSockets. error=%s. Use fsync error: file=%s, line=%d: invalid property value Use fsync (min disk) error: file=%s, line=%d: invalid property value exit_on_nonretryable_disk_error: file=%s, line=%d: invalid boolean property value consumed_msg_hold_time: file=%s, line=%d: invalid property value active_route_connect_time: file=%s, line=%d: invalid property value Fault tolerant reread error: file=%s, line=%d: invalid property value Fault standby lock check error: file=%s, line=%d: invalid property value Configuration error: file=%s, line=%d: ignored unknown permission '%s' Configuration error: file=%s, line=%d: ignoring duplicate %s '%s' specified earlier Configuration error: file=%s, line=%d: ignoring duplicate transport name '%s' in %s list Configuration error: file=%s, line=%d: ignoring duplicate user Configuration error: file=%s, line=%d: ignoring errors in permission line Configuration error: file=%s, line=%d: ignoring invalid connect attempt count Configuration error: file=%s, line=%d: ignoring invalid connect attempt delay Configuration error: file=%s, line=%d: ignoring invalid connect attempt timeout Configuration error: file=%s, line=%d: ignoring invalid disk statistic period Configuration error: file=%s, line=%d: ignoring invalid entry syntax Configuration error: file=%s, line=%d: ignoring invalid factory load balancing metric Configuration error: file=%s, line=%d: ignoring invalid ft activation in the line Configuration error: file=%s, line=%d: ignoring invalid ft heartbeat in the line Configuration error: file=%s, line=%d: ignoring invalid ft reconnect timeout in the line Configuration error: file=%s, line=%d: ignoring invalid line Configuration error: file=%s, line=%d: ignoring invalid line in factory parameters Configuration error: file=%s, line=%d: ignoring invalid line in route parameters Configuration error: file=%s, line=%d: ignoring invalid line: invalid syntax in the line Configuration error: file=%s, line=%d: ignoring invalid reconnect attempt count Configuration error: file=%s, line=%d: ignoring invalid reconnect attempt delay Configuration error: file=%s, line=%d: ignoring invalid reconnect attempt timeout Configuration error: file=%s, line=%d: ignoring invalid value of %s Configuration error: file=%s, line=%d: ignoring invalid value '%s' for property '%s' Configuration error: file=%s, line=%d: ignoring unknown property '%s' Configuration error: file=%s, line=%d: ignoring unrecognized property '%s' Configuration error: file=%s, line=%d: ignoring user out of group context Configuration error: file=%s, line=%d: illegal to use predefined name %s Configuration error: file=%s, line=%d: Invalid clientid value Configuration error: file=%s, line=%d: invalid value of db_pool_size, reset to default of %d bytes Configuration error: file=%s, line=%d: invalid line syntax or line out of order Configuration error: file=%s, line=%d: invalid value of max memory, reset to unlimited Configuration error: file=%s, line=%d: invalid value of max_msg_memory, reset to unlimited Configuration error: file=%s, line=%d: invalid property value Configuration error: file=%s, line=%d: invalid property value, reset to default. Configuration error: file=%s, line=%d: invalid password Configuration error: file=%s, line=%d: invalid value of reserve_memory, reset to zero Configuration error: file=%s, line=%d: invalid value of route_recover_interval, reset to default %d Configuration error: file=%s, line=%d: invalid value of route_recover_count, line ignored Configuration error: file=%s, line=%d: Invalid selector value Configuration error: file=%s, line=%d: invalid syntax of %s, unable to continue. Configuration error: file=%s, line=%d: invalid transport parameter '%s' Configuration error: file=%s, line=%d: invalid transport type '%s' Configuration error: file=%s, line=%d: invalid trace_client_host value Configuration error: file=%s, line=%d: invalid trace_millisecond value Configuration error: file=%s, line=%d: invalid value of %s, reset to unlimited Configuration error: file=%s, line=%d: invalid value '%s' Configuration error: file=%s, line=%d: invalid value '%s' for parameter '%s' Configuration error: file=%s, line=%d: invalid value of '%s' Configuration error: file=%s, line=%d: invalid value of %s Configuration error: file=%s, line=%d: invalid value of %s, reset to 256MB Configuration error: file=%s, line=%d: invalid value of %s, reset to default Configuration error: file=%s, line=%d: line too long, ignoring it Configuration error: file=%s, line=%d: maximum number of listen interfaces reached. Configuration error: file=%s, line=%d: multiple principals specified, line ignored Configuration error: file=%s, line=%d: multiple targets specified, line ignored Configuration error: file=%s, line=%d: out of memory, unable to create Rendezvous transport Configuration error: file=%s, line=%d: no permissions found in acl entry Configuration error: file=%s, line=%d: no target found in acl entry Configuration error: file=%s, line=%d: %s '%s' not found Configuration error: No topic exists for configured durable '%s%s%s'. failed to create durable '%s', exception: %s. Configuration error: file=%s, line=%d: no valid user or group found in acl entry Configuration conflict: file=%s, line=%d: Overriding value of msg_pool_size already set at line=%d. Configuration warning: file=%s, line=%d: parameter '%s' is deprecated Configuration error: file=%s, line=%d: value of reserve_memory too small, reset to 16MB Configuration error: file=%s, line=%d: ignoring invalid line in route parameters: invalid zone type, too long Configuration error: file=%s, line=%d: ignoring invalid line in route parameters: invalid topic prefetch Configuration error: file=%s, line=%d: ignoring invalid line in route parameters: zone name exceeding %d bytes Routing Configuration error: file=%s, line=%d: invalid property value Configuration warning: file=%s, line=%d: ignoring rvcmlistener, duplicate Configuration error: file=%s, line=%d: ignoring rvcmlistener, first token is invalid Configuration error: file=%s, line=%d: ignoring rvcmlistener, invalid destination Configuration error: file=%s, line=%d: ignoring rvcmlistener, second token is invalid Configuration error: file=%s, line=%d: ignoring rvcmlistener, third token is invalid Configuration error: file=%s, line=%d: ignoring rvcmlistener, wildcards are not permitted SmartSockets configuration directory name is too long. error=%s. SmartSockets file '%s' not found. SSL Configuration error: file=%s, line=%d: duplicate value SSL Configuration error: file=%s, line=%d: invalid value of DH key size. SSL Configuration error: file=%s, line=%d: invalid property value Configuration error: file=%s, line=%d: syntax error in the line, ignoring Configuration error: file=%s, line=%d: syntax errors in line, line ignored Topic '%s' not valid in configured durable '%s'. %s%sNo client ID for%s unshared durable '%s'. Configuration error: file=%s, line=%d: Unrecognized attribute Configuration error: file=%s, line=%d: user '%s' not found, ignoring Configuration error: file=%s, line=%d: value is invalid or less than minimum %d, reset to 0 Configuration error: file=%s, line=%d: value less than allowed minimum, reset to 0 Configuration error: file=%s, line=%d: value of %s less than allowed minimum of %dKB, reset to unlimited Configuration error: file=%s, line=%d: Invalid value or value does not fall between %d and %d Configuration error: Invalid line: file=%s, line=%d Configuration error: Missing store header: file=%s, line=%d Configuration error: Mixed mode configuration: file=%s, line=%d Configuration error: Invalid store parameter: file=%s, line=%d Configuration error: Store definition failed Configuration error: Unrecognized store type requested. Configuration error: Filename for store '%s' cannot be empty. Error occurred writing store definition into file. Configuration error: file=%s, line=%d: ignoring channel '%s' on topic '%s', channel does not exist Configuration error: file=%s, line=%d: ignoring channel '%s' on topic '%s', overlaps with channel '%s' on topic '%s' Configuration error: file=%s, line=%d: ignoring channel '%s', duplicate name Configuration error: file=%s, line=%d: ignoring channel '%s', address of '%s:%d' already defined Configuration error: file=%s, line=%d: channel '%s', %s Configuration error: file=%s, line=%d: channel '%s', no address specified. Configuration error: file=%s, line=%d: channel '%s', invalid address syntax: port not specified. Configuration error: file=%s, line=%d: channel '%s', invalid address: group must be in the range 224.0.0.0 to 239.255.255.255 Configuration error: file=%s, line=%d: channel '%s', interface must address a valid multicast-capable network interface. Configuration error: file=%s, line=%d: channel '%s', invalid address: port must be in the range 1 to 65535 Configuration error: file=%s, line=%d: channel '%s', ttl must be in the range 1 to 255 Configuration error: file=%s, line=%d: channel '%s', priority must be in the range -5 to 5 Configuration error: file=%s, line=%d: channel '%s', maxrate must be less than 512MB Configuration error: file=%s, line=%d: channel '%s', maxtime must be greater than 0 Configuration error: file=%s, line=%d: cannot store messages in: %s Configuration error: file=%s, line=%d: cannot find store: %s Required store param 'type' not specified for store '%s' Configuration error: file=%s, line=%d: parameter does not match another parameter that defined store '%s' as 'file' type%s. Configuration error: file=%s, line=%d: parameter does not match another parameter that defined store '%s' as 'dbstore' type%s. Configuration error: file=%s, line=%d: parameter does not match another parameter that defined store '%s' as 'mstore' type%s. Store '%s' already defined Configuration error: Store with similar dbstore_driver_url exists, file=%s, line=%d Configuration error: duplicate file name %s for stores %s and %s Configuration warning: file=%s, line=%d: the discardAmount is too small for the selected RV Queue Limit Policy. It is recommended to have at least 10%% of the maxEvents Configuration error: file=%s, line=%d: the discardAmount is too big compared to the maxEvents value. Defaulting to TIBRVQUEUE_DISCARD_NONE policy Configuration error: file=%s, line=%d: maxEvents and discardAmount values must be strictly positive for an RV Queue Limit Policy other than TIBRVQUEUE_DISCARD_NONE. Defaulting to TIBRVQUEUE_DISCARD_NONE policy Configuration error: file=%s, line=%d: RV Queue Limit Policy '%s' unknown or not supported. Defaulting to TIBRVQUEUE_DISCARD_NONE policy Configuration error: file=%s, line=%d: Error parsing the RV Queue Limit Policy value '%s'. Defaulting to TIBRVQUEUE_DISCARD_NONE policy Configuration warning: file=%s, line=%d: The bridge's source destination '%s' is dynamic but has no parent. The bridge should either be removed or a static parent destination added Changing the type of the existing store '%s' is not permitted Only stores of type 'file' are permitted. Unable to create store '%s' of type '%s' |
| Error writing commit request, errors already occurred in this transaction | |
|---|---|
| Description | A client application's attempt to commit a transaction failed because the server encountered an error during an operation associated with the transaction. |
| Resolution | Examine previous error statements to determine the cause of the operation failure and correct that before attempting the transaction again. |
| Errors |
Error writing commit request, errors already occurred in this transaction. |
| Error writing configuration file | |
|---|---|
| Description | tibemsd was unable to update one of its configuration files following a configuration change. |
| Resolution | Check that the user that started the tibemsd has permission to change the configuration files and that there is sufficient disk space on the device. |
| Errors |
Error occurred saving acl information Error occurred saving bridges information Error occurred saving durables information Error occurred saving factories information Error occurred saving file '%s' Error occurred saving group information Error occurred saving %s information Error occurred saving main configuration file '%s' Error occurred saving routes information Error occurred saving tibrvcm information Error occurred while updating main configuration file '%s'. Configuration has not been saved. Error occurred writing bridges into file. Error occurred writing destination '%s' into file Error occurred writing factory into file. Error occurred writing group '%s' into file Error occurred writing into the file '%s'. Error occurred writing route into file. I/O error occurred saving bridge information I/O error occurred saving group information I/O error occurred saving route information I/O error occurred writing into file '%s' Configuration error: file=%s, line=%d: Ignoring property '%s' which is not supported in EMS Community Edition. |
| Error writing to store file | |
|---|---|
| Description | tibemsd was unable to write data to one of its store files. |
| Resolution | Ensure that the directory containing the store files is mounted and accessible to the tibemsd, and that there is free space available on the device |
| Errors |
A %s I/O error occurred on file descriptor %d: %s - %d A %s I/O error occurred on file %s: %s - %d Failed writing block data to '%s': %s Failed writing message to '%s': I/O error or out of disk space. Failed writing purge state for queue '%s': I/O error or out of disk space. Failed writing purge state for topic consumer: I/O error or out of disk space. Exception trying to create confirm record, %s. Exception trying to create message from store: %s Exception trying to create transaction record. Exception trying to create valid messages record, %s. Exception trying to export message to RV. Failed writing message to '%s': %s. Exception writing transaction commit record: %s. Exception writing transaction rollback record: %s. Exception writing transaction prepare record: %s. Failure deleting old version of transaction record: %s. Failed deleting '%s' record from %s: %s |
| Exceeded system resources. | |
|---|---|
| Description | The system resources are inadequate for timely processing of server activities. |
| Resolution | Increase the specified resource or reduce the workload on this server. |
| Errors |
WARNING: Slow clock tick %d seconds, delayed messaging and timeouts may occur. System appears overloaded. WARNING: Connection timeouts delayed around %d seconds. Missed transfer of global lock before a slow operation was reported. Last offender grabbed lock around %d milliseconds ago. WARNING: Slow processing protocol message of type %s, lasted around %d milliseconds. WARNING: Slow completing processing protocol message of type %s, lasted around %d milliseconds. WARNING: Slow removing messages, lasted around %d milliseconds. This may have delayed connection timeouts. WARNING: Slow swapping out messages, lasted around %d milliseconds. This may have delayed connection timeouts. WARNING: Slow processing message (%s%s), lasted around %d milliseconds. WARNING: Slow processing message (%s ac=%d), lasted around %d milliseconds. WARNING: Slow processing event callback (%s), lasted around %d milliseconds. WARNING: Slow write to store (%s) lasted around %d milliseconds. WARNING: A single %s store (%s) lasted around %d seconds. |
| Failed to open TCP port | |
|---|---|
| Description | tibemsd was unable to open the tcp port. |
| Resolution | Shutdown process that is using the port or change the value of the 'listen' parameter in the server's tibemsd.conf file to a port that is not in use. |
| Errors |
Binding connection to TCP port %d failed:%d (%s). |
| File access error | |
|---|---|
| Description | tibemsd was unable to properly access the specified file. |
| Resolution | Check that the path name is correct and the directory exists, the user that started tibemsd has permission to read the specified directory and path, the file exists if it isn't one that the tibemsd can create, the file is not being used by another tibemsd or some other process. |
| Errors |
Configuration file '%s' not found. Failed to create file '%s' failed to open file '%s'. failed to open log file '%s'. Failed to read message from store. Failed to rename file %s into %s: %s Unable to open metadata file '%s', error '%s'. Unable to open metadata file '%s', file may be locked. Unable to open store file '%s', error '%s'. Unable to open store file '%s', file may be locked. Unable to preallocate storage file '%s'. I/O error occurred reading from the file '%s'. Exiting on non-retryable disk error: %d Exiting on disk error: %d Exception trying to read message from store. Error during file close of '%s' - %d. Unable to open FT State Replication determination file '%s', error '%s'. Unable to open FT State Replication determination file '%s', file may be locked. Error upon accessing FT State Replication determination file '%s', invalid header CRC. Unable to write to FT State Replication determination file '%s', error '%s'. Exiting due to error while accessing the FT State Replication determination file. Symbolic link '%s' is incorrect: %s. |
| FIPS 140-2 Mode Errors | |
|---|---|
| Description | An error occurred while starting or running the server in FIPS 140-2 compliant mode. |
| Resolution | Check the configuration of SSL related parameters to make sure that no incompatible ciphers or operations are requested. |
| Errors |
Cannot specify ldap_tls_cipher_suite in FIPS 140-2 mode. Cannot specify ldap_tls_rand_file in FIPS 140-2 mode. Cannot specify SSL cipher list in FIPS 140-2 mode. Cannot specify random data source file in FIPS 140-2 mode. Cannot specify ssl_dh_size in FIPS 140-2 mode. Cannot specify ssl_server_ciphers in FIPS 140-2 mode. Cannot specify ssl_rand_file in FIPS 140-2 mode. |
| FTL Gateway. | |
|---|---|
| Description | An error occured when loading or using the FTL Gateway. |
| Resolution | Correct the FTL transport in the EMS configuration and/or the Application in the FTL realm service. |
| Errors |
Error setting FTL message constant '%s'. Constants (none). Constant (string) %s:\%s\ Constant (long) %s: %PRINTF_LLFMTd Exception Summary: %s Exception:\n%s The FTL application for this gateway was administratively disabled. Please restart this server to re-enable this FTL gateway. FTL Notification Type=%d: %s\n Failed to process FTL password. Connecting to the realm service. Setting a FTL discard policy is highly recommended. Invalid FTL discard policy. Defaulting to \old\. Global FTL Settings Realm service URL: %s Realm server Secondary URL: %s Username: %s Password: %s Log Level: %s Application Name: %s Discard Policy: %s Discard Amount: %d Discard Max Events: %d Freeing FTL Global resources. FTL Global resources freed. FTL Advisory: Unable to start FTL dispatcher thread. Unable to initialize FTL Transport (%s). For more information, enable FTL tracing. FTL Transport '%s' Ignoring unsupported FTL field type (%s). Error importing FTL message. status = %s. FTL Transport '%s': Skipping message (subscriber removed). Error setting FTL message field '%s' Conversion from EMS bytes message to FTL message failed. Conversion from EMS text message to FTL message failed. Conversion from EMS data message to FTL message failed. Conversion from an EMS Object message to a FTL message is not supported. Conversion from an EMS Stream message to a FTL message is not supported. Conversion from EMS message type (%d) to a FTL message is not supported. Unable to set FTL fields from EMS Properties. Unable to set FTL fields from EMS header values. Unable to export message (%s). FTL Transport Settings Topic Import Delivery Mode: %s. Queue Import Delivery Mode: %s. Endpoint: %s Import Parameters Match String: %s Subscriber Name: %s Export Parameters Format: %s FTL Transport '%s' removed subscriber. FTL Transport '%s' removing subscriber. FTL Transport '%s': Error removing subscriber. Error creating subscriber '%s' on endpoint '%s' Creating FTL Transport '%s' Created FTL Transport '%s' Failed to create FTL transport '%s' FTL transport '%s' is creating a publisher. FTL Transport '%s' created a publisher. FTL transport '%s': Error creating publisher. Destroyed FTL transport '%s' Transport '%s' cannot subscribe to %s %s; already subscribed. FTL Transports cannot be imported on a wildcard destination. A FTL Transport can be used with only one destination. FTL Transport '%s' has subscribed to %s %s. FTL Transport '%s' failed to subscribe to %s %s. FTL Transport '%s' has unsubscribed from %s %s. FTL transport '%s' cannot be specified as an import by more than one destination. %s %s FTL Transport '%s' as an import for destination '%s'. %s %s FTL Transport '%s' as an export for destination '%s'. |
| Internal error | |
|---|---|
| Description | The server detected an internal inconsistency. |
| Resolution | Send the error statement and a description of the environment to TIBCO Support. |
| Errors |
**Error** unable to process message, error = %s Admin user not found during initialization Error bridging transacted data message, '%s'. Error processing xa commit request, %s. connID=% PRINTF_LLFMT d %s Error processing xa end - transaction marked ROLLBACKONLY, %s. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Error processing xa prepare request, %s. connID=% PRINTF_LLFMT d %s Error processing xa rollback request, %s. connID=% PRINTF_LLFMT d %s Error decoding sequence data in xa rollback request. connID=% PRINTF_LLFMT d %s Error decoding sequence data in route ack response. Unable to create internal session Problem setting flow stall recover message on route queue:%s: %s Failed to handle connection initialization: %s. Problem trying to recover routed consumer for queue %s: setting recover message. Error: %s Failed to send the flow stall recover request: %s. Unable to handle transacted data message, '%s'. Unable to handoff connection init message: %s. Unable to initialize fault tolerant connection, remote server returned '%s' Unable to process producer message, failed to add sender name, error=%s. Unable to process sequence for message. Unable to send recover ack on flow stall: %s Handling of route flow stall recovery request from %s failed: unable to get message property %s: %s Handling of route flow stall recovery request failed: Unable to get message properties:%s Failed to send acknowledge to the stall recover request of server %s, will try later. Error: %s failed to send recover ack on stalled flow: invalid consumer unable to create recovered connection, status: %s Exception creating purge record. Exception creating zone. Exception creating zone: adding zone to state. Exception in startup, exiting. Exception preparing message for client send (%s): %s Exception sending flow recover acknowledge Exception sending routing information to %s - %s Exception sending session init response Exception sending queue acknowledge response to %s: %s Exception trying to initialize connection. Exception trying to initialize connection, can't send response: %s Exception trying to initialize route. Exception trying to initialize route '%s' configured durables: %s Exception trying to process message, '%s'. Exception trying to process message from store. Failure queuing incoming message for processing: %s. Failure queuing message for removal from system: %s. Failure queuing message to add to dead queue: %s. Failure discarding topic overflow: %s. Failure processing system request. Failure processing transaction message. Failure bridging incoming message: %s. Failure verifying uniqueness of routed message: %s. Failure scheduling message hold release: %s. Exception adding message write context: %s. %s: Failure processing multicast request: %s %s: Failure sending multicast request response: %s %s: Failure processing multicast status: %s %s: Failure sending multicast status response: %s %s: Failure sending multicast configuration: %s Failure sending multicast message on channel '%s': %s Failure enqueuing multicast message on channel '%s': %s Failure starting multicast engine: %s Failure starting multicast channel '%s': %s Failure posting multicast channel '%s' wake event: %s Failed preparing message for writing: %s Failed discarding local transaction: %s Abandoning transaction record due to IO failure. Error sending acknowledgment to route '%s': %s Error processing acknowledgments from route '%s': %s Failure starting delivery of delayed message seq = % PRINTF_LLFMTd: %s Failure moving failed delivery delayed message seq = % PRINTF_LLFMTd to dead queue: %s |
| Invalid connection | |
|---|---|
| Description | Warning indicating that tibemsd was attempting to reestablish delivery of messages across a route to another tibemsd but was unable to find the connection for that route. |
| Resolution | Either reduce the tibemsd's memory requirement by consuming messages or removing messages from its queues, or increase the amount of memory available to the tibemsd by shutting down other processes on the machine or increasing the machine's memory. |
| Errors |
Recovery flow stall for destination %s failed: invalid route connection |
| Invalid destination | |
|---|---|
| Description | An application is attempting to use a destination name that is not valid. |
| Resolution | Alter application code to use an acceptable destination name. |
| Errors |
%s: create %s failed: Not permitted to use reserved queue [%s]. %s: %s failed: illegal to use wildcard %s [%s]. %s: %s failed: %s [%s] not configured. At least one bridge is referencing %s [%s] as a target. This destination does not exist and there is no parent that would allow its dynamic creation. The destination has been forcefully created. To avoid this, the bridge(s) referencing this target should be destroyed. Use of '$' destination prefix is not supported [%s %s]. |
| Invalid listen specification | |
|---|---|
| Description | The server could not parse the listen parameter in the tibemsd.conf file |
| Resolution | Correct the listen parameter to match the form [protocol]://[url] as specified in the manual. |
| Errors |
Invalid listen specification: '%s'. Invalid request to create temporary destination. |
| Invalid session | |
|---|---|
| Description | tibemsd received a request that referred to a session that doesn't currently exist. |
| Resolution | Send details of the error and the situation in which it occurred to TIBCO Support. |
| Errors |
Cannot find session for ack Cannot find session for ack range %s: destroy %s failed: invalid session id=%d. Unable to destroy session, invalid session. Invalid session in commit request. Invalid commit request. Invalid session trying to update(%d) tx record. Invalid session in commit transaction record. Invalid session in recover request. Invalid session in rollback request. Invalid session in xa end request. connID=% PRINTF_LLFMT d Invalid session in xa start request. connID=% PRINTF_LLFMT d |
| LDAP error - should always display LDAP error | |
|---|---|
| Description | An attempt to authenticate a client's userid and password using the external LDAP server failed. |
| Resolution | Examine the error code printed by the messaging server and consult the manual for the external LDAP server. |
| Errors |
Filter '%s' contains an illegal type substitution character, only %%s is allowed Filter '%s' contains too many occurrences of %%s, max allowed is: %d Filter '%s' too long, max length is %d characters Invalid search scope: %s LDAP Configuration error: file=%s, line=%d: invalid property value LDAP is not present LDAP search resulted %d hits. ldap_url_parse failed, returned: %d Lookup of group '%s' produced incorrect or no results Missing LDAP URL Missing %s parameter Zero entries returned from getting attributes for group '%s': Failed adding user '%s' into LDAP user cache |
| LICENSE WARNING | |
|---|---|
| Description | The server detected a violation of its license. |
| Resolution | This error only occurs with the evaluation version of the server or in an embedded form. To correct this error either replace your evaluation version with a production version or contact the vendor who supplied the embedded version. |
| Errors |
License violation: %s. |
| Missing configuration | |
|---|---|
| Description | An essential attribute has not been configured. |
| Resolution | Change the tibemsd.conf file so that a value for the attribute is provided. |
| Errors |
Configuration error with metadata database. Configuration error with storage databases. |
| Missing transaction | |
|---|---|
| Description | A client application attempted to change the state of a transaction that the tibemsd does not have in its list of current transactions. |
| Resolution | Check tibemsd trace logs to see if the transaction had been committed or rolled back by an administrator, if not then check the client code to see if it or its transaction manager are calling the transaction operations in the correct order. |
| Errors |
Cannot find transaction referred to transaction record update(%d) request. connID=% PRINTF_LLFMT d %s Cannot find transaction referred to in xa commit request. connID=% PRINTF_LLFMT d %s Cannot find transaction referred to in xa prepare request. connID=% PRINTF_LLFMT d %s Cannot find transaction referred to in xa rollback request. connID=% PRINTF_LLFMT d %s Received prepare request for transaction already prepared. connID=% PRINTF_LLFMT d %s Cannot find transaction referred to in xa start (resume) request. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Cannot find transaction referred to in xa start (join) request. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Cannot find transaction referred to in xa end request. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s |
| Multicast Channel Allotted Bandwith Exceeded. | |
|---|---|
| Description | Indicates that a multicast channel's allotted bandwidth has been exceeded. |
| Resolution | Either slow down the publisher(s), enable flow control, or increase the multicast channel's allotted bandwidth by increasing the channel's maxrate property or increasing the server's multicast_reserved_rate property. |
| Errors |
Multicast channel \'%s\' has exceeded its allotted bandwidth |
| Multicast Daemon Status Codes and Errors | |
|---|---|
| Description | Errors occuring in the Multicast Daemon. |
| Resolution | Check the configuration of the Multicast Daemon and Server, as well as the health of the network. |
| Errors |
Interface IP address: %s [%s] Connection created, connid=% PRINTF_LLFMT d Error: Unable to set channel property \'%s\'=% PRINTF_LLFMT d [%s] Created consumer consid=%PRINTF_LLFMTd connid=%PRINTF_LLFMTd topic=\'%s\' Multicast Daemon Id=%s Statistics enabled on a %d second interval. Statistics disabled. Rotating log from %s to %s Memory allocation error, possible data loss. Unrecoverable PGM error rc=%d, reason=%s Could not parse configuration file \'%s\' Interface IP address: %s Tracing enabled. Tracing disabled. refused new connection with existing ID % PRINTF_LLFMT d [%s] Connection destroyed, connid=%PRINTF_LLFMTd Error sending to consid=%PRINTF_LLFMTd connid=%PRINTF_LLFMTd from channel \'%s\': %s %s, status=%s Attached channel \'%s\' to consumer consid=%PRINTF_LLFMTd connid=%PRINTF_LLFMTd Error attaching channel \'%s\' to consumer consid=%PRINTF_LLFMTd connid=%PRINTF_LLFMTd Detaching channel \'%s\' from consumer consid=%PRINTF_LLFMTd connid=%PRINTF_LLFMTd Destroying consumer consid=%PRINTF_LLFMTd connid=%PRINTF_LLFMTd Channel configuration from server does not match existing channel \'%s\' Ignoring additional PGM receiver created on group \'%s\', dport=%d, sport=%d, channel=%s Created channel: \'%s\' Error: %s is not a valid multicast-capable IP address. Use the -ifc command line parameter to specify a valid interface. |
| Multicast General Status Codes and Errors | |
|---|---|
| Description | General multicast errors that can occur in the Server and Multicast Daemon. |
| Resolution | Check the configuration of the Multicast Daemon and Server, as well as the health of the network. |
| Errors |
PGM ERROR: %s - %s (%d) PGM ERROR: channel=\'%s\' - %s (%d) Error setting PGM parameter %s=%u: %s (%d) Error setting PGM parameter %s=\'%s\': %s (%d) Error getting PGM parameter \'%s\': %s (%d) Error getting PGM statistic \'%s\': %s (%d) Received an invalid EMS Message. Received a message spanning mulitple fragments. PGM Session was reset for channel \'%s\', PGM seqno=%PRINTF_LLFMTd, code=%c Stopped receiving on channel \'%s\' Started receiving on channel \'%s\' Error receiving on channel \'%s\' Stopped sending on channel \'%s\' Started sending on channel \'%s\' Error creating sender on channel \'%s\': %s |
| Mstore errors | |
|---|---|
| Description | An error occurred using an Mstore database file. |
| Resolution | |
| Errors |
Unable to open store %s: %s: %d (%s). Wrong schema version. Found %d, expected %d. Schema creation failed: '%s' error: %d %s Unable to reset a statement (%s): %s. Unable to step a statement (%s): %s: %d. Store %s: %s: bind fail: %d. Store %s: Fail retrieving consumer interest: %d. Store %s: Fail retrieving msg interest info: %s. Store %s: Fail writing transaction record: %s. Store %s: Fail reading data: %s. Store %s: Fail reading topic message: %s. Store %s: Fail marking topic message non-pending: %s. Store %s: Fail reading next topic message: %s. Store %s: Fail reading queue message: %s. Store %s: Fail getting next queue message: %s. Store %s: Fail marking queue message non-pending: %s. Store %s: Fail writing transaction info: %s. Store %s: Fail deleting transaction acks: %s. Store %s: Fail recording transaction msg: %s. Store %s: Fail recording transaction acks: %s. Store %s: Fail deleting ack: %s. Store %s: Fail completing transaction: %s. Store %s: Too many entries in memory message interest. Store %s: Invalid message interest for destination % PRINTF_LLFMT d. Store %s: Invalid destination read. Store %s: Failure restoring transaction: %s. Store %s: Failure restoring transaction msg: %s. Store %s: Failure restoring transaction ack: %s. Store %s: Failure resetting topic: %s. Store %s: Correct functioning cannot be guaranteed due to mstore failure. Exiting. Failed writing to mstore: I/O error or out of disk space. Failed writing to mstore: I/O error or out of disk space. Exiting on disk error. Ignoring property mstore_truncate=true for [%s] because this mstore is not in a format that allows truncation. Please use the tibemsdbconvert tool. Pragma INCREMENTAL_VACUUM(%d); returned error %d. |
| Out of memory | |
|---|---|
| Description | The server failed to allocate memory as it was attempting to perform an operation. |
| Resolution | Check how much memory the server process is using according to the operating system. Compare this with how much memory and swap space the host actually has. If there are sufficient memory and swap space, check the operating system limits on the server process to determine if this is the cause. If the limits are set to their maximum and this error occurs, reduce the load on this server by moving some topics and queues to another server. |
| Errors |
%s trying to recreate persistent message. Error during routed queue configuration, can not create routed queue consumer Could not initialize monitor Error: out of memory processing admin request Error during route configuration, can not create routed queue consumer, err=%s Configuration error - duplicate group: file=%s, line=%d: ignoring line Unable to create admin group: out of memory during initialization Error: unable to create alias for %s '%s': no memory Error: unable to create alias: out of memory Unable to create import event for %s '%s' on transport '%s' Unable to create internal connection, error=(%d) %s Unable to create internal connection: out of memory during initialization Error: unable to create %s '%s': no memory Error: unable to create route while parsing file=%s, line=%d. Unable to create SmartSockets subscriber on transport '%s', %s '%s': out of memory Unable to create temporary destination, out of memory Failed to create reserve memory. Exiting. Failed writing message to '%s': No memory for operation. Unable to process message imported on transport '%s'. Fault Tolerant configuration, no memory! Fault Tolerant error, no memory. LDAP initialization failed. No memory. No memory: %s. No memory authenticating user '%s' No memory authenticating via LDAP Out of memory while building admin response message Out of memory while building JNDI response message Out of memory creating global import event on transport '%s' Out of memory creating import event for %s '%s' on transport '%s' Out of memory creating SS transport %s No memory creating stalled flows in destination Out of memory during initialization Could not set replyto destination exporting SS message. Could not set destination exporting SS message. Could not get destination exporting SS message. Failed to initialize SS message fields exporting SS message. Out of memory exporting SS message. Out of memory: unable to process SS message type on export No memory for creating connection. No memory generating dynamic route durable. Out of memory importing SS message. error=%s. No memory in IO thread to create pool. Out of memory while parsing bridges file Out of memory while parsing factories file Out of memory while parsing routes file No memory performing routing operation. Out of memory processing %s on %s '%s' Out of memory processing administrative request Out of memory processing message tracing No memory processing purge record. No memory while processing route interest Out of memory processing transports Out of memory processing transports configuration Out of memory reading configuration. Out of memory restoring routed consumer Out of memory sending monitor message. No memory sending topic routing information. %s trying to add message to %s queue. No memory trying to add message to system. No memory trying to cleanup route. No memory to create ack record. No memory to create client connection No memory to create configured durable '%s%s%s'. No memory to create configured durables No memory to create confirm record. No memory to create connection. No memory to create consumer. No memory trying to create destination. No memory to create destination for consumer or browser. No memory trying to create global topic destination. No memory to create message from store. No memory trying to create message producer. No memory to create producer. No memory trying to create queue browser. No memory trying to create response message. No memory to create routed consumer No memory to create routed queue consumers No memory trying to create routed queue destination. No memory trying to create routed tmp queue destination. No memory to create session. No memory trying to create tmp destination for consumer. No memory trying to create transaction. No memory to create valid messages record. No memory restoring valid sequence number info. No memory to create zone. No memory trying to export message to RV. No memory trying to export message to SS. No memory trying to import message from RV%s. No memory trying to import message from RVCM. No memory trying to import message from SS. error=%s. No memory trying to initialize connection. No memory trying to initialize route connection. No memory trying to parse configured durable. No memory trying to process data message. No memory trying to process queue message. No memory to process route interest No memory trying to process system request. No memory trying to process topic consumer. No memory trying to process topic message. No memory trying to process xa end. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s No memory trying to read message from store. Route down while trying to recover routed consumer. No memory trying to recover routed consumer. No memory trying to recover one msg for routed consumer. No memory trying to recover route stall. No memory trying to recover route stall, will try again. No memory to restore messages. No memory to restore prepared transactions. No memory trying to retrieve for queue browser. No memory trying to send recover/rollback response. out of memory trying to send topic interest to routes No memory to set clientID for connection. No memory trying to setup queue route configuration No memory trying to setup route configuration No memory trying to setup topic route configuration Route recovery of destination %s on route from %s will fail: No memory Route recovery of destination %s on route from %s will fail: No memory to create timer Route recovery of destination %s on route from %s will fail: %s Failed to initialize OpenSSL environment: out of memory Out of memory queuing imported message for processing. Out of memory gathering consumers for incoming message. Out of memory scheduling message delete. Out of memory preparing to write message. Out of memory assembling list of message to store. Out of memory processing route consumer. Out of memory preparing message for writing. Out of memory creating connection thread list. Out of memory creating RV gateway thread list. Out of memory creating SmartSockets gateway thread list. error=%s. Out of memory delaying bridged flow control response. Out of memory preparing to delay flow control response. Out of memory delaying one flow control response. Out of memory delaying set of flow control responses. Out of memory trying to clear message hold. Out of memory trying to delete held message. Unable to update the valid messages record. Error code: %d - %s. No memory scheduling message delete completion, Error code: %d. No memory to build msg properties. No memory to create prop. No memory to set prop. No memory getting the list of delivered messages. The JMSXDeliveryCount property of some messages may no longer be accurate. No memory getting the list of delivered messages from session % PRINTF_LLFMT d. The JMSXDeliveryCount property of messages that were sent to this session may no longer be accurate. No memory getting the list of delivered messages during rollback of transaction with xid: %s. The JMSXDeliveryCount property of messages that were rolled-back may no longer be accurate. Out of memory discarding message. Out of memory advancing queue pending. Out of memory adding message to pending list. Out of memory returning message to pending list. Out of memory trying to re-queue after xa rollback. Out of memory finalizing restored queue: %s. Out of memory restoring queue flush state. Out of memory detaching message during queue purge. Out of memory removing message from queue. Out of memory retrieving message by correlation id. Out of memory scheduling cleanup of transaction ack: %s. Out of memory setting message all acked: %s. Out of memory cleaning up transaction: %s. Out of memory updating sent state on ack. Out of memory updating in-doubt state on ack. Out of memory removing message from system. Out of memory associating ack with data. Out of memory associating ack with transaction. Error setting mstore discard scan: %s. Error setting mstore_truncate timer: %s. Out of memory recording modified topic. Out of memory re-queuing sent messages. No memory trying to resend delivered messages following an xa end NOTA. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s No memory to create consumer on %s [%s] Failed to set delivery count in%smessage: status=%s Failure to create per-mstore delayed delivery state: %s. |
| Protocol error, incorrect XID in XA request | |
|---|---|
| Description | The tibemsd received an XA End instruction from the third party Transaction Manager which referred to a different transaction from the one currently in use by the session. |
| Resolution | Report this to the your Transaction Manager vendor. |
| Errors |
Incorrect xid in xa end (0x%x) request. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s |
| Protocol error, transaction in incorrect state | |
|---|---|
| Description | A client application's attempt to start an XA transaction failed because the transaction already exists and is not in the correct state. |
| Resolution | This error is most likely caused by an external transaction manager that allowed two separate client applications to use the same XA transaction identifier (XID). Consult the manual for the transaction manager or report this to the transaction manager vendor. |
| Errors |
Cannot process xa start for a session when another transaction is already active on that session. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Cannot process xa start with TMNOFLAGS when the transaction is already active. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s All clients participating in the same global transaction must use the same protocol, connID=% PRINTF_LLFMT d Invalid xa start (resume) request: the session was not previously suspended. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Error processing xa start - transaction marked ROLLBACKONLY. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Error processing xa start request, %s. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Invalid xa end (suspend) request: session already suspended or not started. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Invalid xa end request: the session was neither associated with a transaction nor suspended. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Error processing xa prepare - transaction marked ROLLBACKONLY, %s. connID=% PRINTF_LLFMT d %s |
| Protocol message format error | |
|---|---|
| Description | tibemsd received a message with either missing or incomplete data. |
| Resolution | Send details of the error and the situation in which it occurred to TIBCO Support. |
| Errors |
Unable to confirm session, invalid request. Unable to create consumer, invalid destination. Unable to init session, invalid request. Unable to process msg for export. error=%s. Unable to recover consumer, invalid request. Unable to recover consumer, invalid session. Unable to recover one msg for consumer, invalid request. Unable to recover one msg for consumer, invalid sequence number. Unable to recover one msg for consumer, invalid session. Unable to serve the flow stall recover request from server %s, invalid request. Unable to start consumer, invalid consumer Unable to server the flow stall recover request from server %s, invalid consumer. Unable to unsubscribe consumer, invalid client request. %s: %s failed: illegal to use %s [%s] in standby state. Invalid flag in xa end request. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Invalid flag in xa start request. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s Invalid request to delete temporary destination: %s. connID=% PRINTF_LLFMT d Invalid request to delete temporary destination: not owner connection. Invalid xid in commit request. Invalid xid in commit transaction record. Invalid xid trying to update(%d) transaction record. Invalid xid in rollback request. Invalid xid in rollback transaction record. Invalid xid in xa commit request. connID=% PRINTF_LLFMT d Invalid xid in xa end request. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d Invalid xid in xa prepare request. connID=% PRINTF_LLFMT d Invalid xid in xa rollback request. connID=% PRINTF_LLFMT d Invalid xid in xa start request. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d Malformed routed message Problem decoding sequence data in confirm: %s. Problem decoding sequence data in rollback. Problem decoding sequence data in xa end. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d %s %s:%s queue browser failed: queue name is missing in request message Received admin request with replyTo not set Received JNDI request with replyTo not set. Received unexpected message type %d No destination in incoming data message. Invalid %s message |
| Protocol Sequence Error | |
|---|---|
| Description | A non-embedded java client is attempting to connect to a tibemsd that is part of an embedded JMS environment. |
| Resolution | Reconfigure the client to connect to a fully licensed tibemsd. |
| Errors |
Invalid client connect detected. No closure. |
| Recovery errors | |
|---|---|
| Description | An error occurred during the recovery process. |
| Resolution | If you are not able to fix the problem and need to restart the system, make a backup of the store files and restart the server with the '-forceStart' command line parameter. The server will then attempt to start regardless of errors (expect out-of-memory errors). In this mode, application messages and/or internal records causing problems (due to file corruption or other) will be deleted. Therefore, dataloss is likely to occur, so this command line parameter should be used with extreme caution and only after understanding the consequences. A copy of the store files can be sent to TIBCO Support for post-mortem analysis. |
| Errors |
The recovery process stopped while processing a '%s' record (id=% PRINTF_LLFMT d), error: %d - %s. Check the section 'Error Recovery Policy' from chapter 'Running the EMS Server' in the User's Guide before attempting to restart the server The recovery process stopped while processing a '%s' record (id=% PRINTF_LLFMT d) due to an out-of-memory condition. Ensure that the system can allocate sufficient memory to the EMS Server process before restarting it Unable to get the session's context handle for %s record: %d - %s Unable to get the list iterator for %s record Unable to get next element from list for %s record Unable to create %s object, no memory Error occured while processing %s record id=% PRINTF_LLFMT d (%s) - Unable to reconstruct message: %d - %s Unable to recreate zone '%s': %d - %s Unable to add zone '%s' to the system: %d - %s Zone '%s' is defined as type '%s' in configuration but also is defined as type '%s' in meta.db Unable to recreate connection id=% PRINTF_LLFMT d, client id=%s: %d - %s Discarding session id=% PRINTF_LLFMT d because the connection id=% PRINTF_LLFMT d was not recovered. Recovery continues Unable to recreate session id=% PRINTF_LLFMT d with connection id=% PRINTF_LLFMT d and client id=%s: %d - %s Unable to recreate consumer id=% PRINTF_LLFMT d with connection id=% PRINTF_LLFMT d, session id=% PRINTF_LLFMT d, and client id=%s: invalid destination: %s No memory to create destination for consumer id=% PRINTF_LLFMT d Discarding consumer id=% PRINTF_LLFMT d on destination '%s' because connection id=% PRINTF_LLFMT d with client id=%s was not restored. Recovery continues Discarding consumer id=% PRINTF_LLFMT d on destination '%s' and connection id=% PRINTF_LLFMT d with client id=%s because session id=% PRINTF_LLFMT d was not restored. Recovery continues No memory to recreate consumer id=% PRINTF_LLFMT d Failed to build import selectors for consumer id=% PRINTF_LLFMT d: %d - %s Failed to read import selectors for routed consumer id=% PRINTF_LLFMT d: %d - %s Discarding durable id=% PRINTF_LLFMT d (connection id=% PRINTF_LLFMT d, client id=%s) on destination '%s' because the durable name is not specified. Recovery continues Unable to recreate producer id=% PRINTF_LLFMT d with connection id=% PRINTF_LLFMT d, session id=% PRINTF_LLFMT d, and client id=%s: invalid destination: %s No memory to create destination for producer id=% PRINTF_LLFMT d Discarding producer id=% PRINTF_LLFMT d on destination '%s' because connection id=% PRINTF_LLFMT d was not restored. Recovery continues Discarding producer id=% PRINTF_LLFMT d on destination '%s' with connection id=% PRINTF_LLFMT d and client id=%s because session id=% PRINTF_LLFMT d was not restored. Recovery continues Unable to recreate purge record: invalid destination: %s Unable to recreate purge record for destination %s: %d - %s Error creating message for transaction record: %d - %s Error creating message's store structure for transaction record: %d - %s Unable to recover transaction record: transaction id missing: %d - %s Unable to recover transaction id=% PRINTF_LLFMT d: %d - %s Unable to recover ack record (txid=% PRINTF_LLFMT d, consid=% PRINTF_LLFMT d, seqid=% PRINTF_LLFMT d, location=%s): %d - %s Unable to recover ack record, cannot create message: %d - %s Unable to recover sequence numbers from valid record: %s Unable to recover message, can not create lock: %d - %s Unable to restore held message from store, (location=%s) no memory Unable to restore message sequence=% PRINTF_LLFMT d: (location=%s) %d - %s No memory to create destination for message Inconsistency restoring routed message sequence=% PRINTF_LLFMT d No memory to restore routed message sequence=% PRINTF_LLFMT d Persisted message possibly corrupted: %s Error creating message's store structure: %d - %s |
| Rejected attempt to connect via SSL to TCP port | |
|---|---|
| Description | A client application attempted to connect to the server's TCP port using the SSL protocol. |
| Resolution | Change the client application's URL from ssl to tcp or change the server's listen parameter from tcp to ssl. To activate a change of the server listen parameter requires a restart of the server. |
| Errors |
Rejected attempt to connect via SSL to TCP port |
| Rejected attempt to connect via TCP to SSL port | |
|---|---|
| Description | A client application attempted to connect to the server's SSL port using the TCP protocol. |
| Resolution | Change the client application's URL from tcp to ssl or change the server's listen parameter from ssl to tcp. To activate a change of the server listen parameter requires a restart of the server. |
| Errors |
Rejected attempt to connect via TCP to SSL port |
| Rejected connect from route: invalid cycle in route | |
|---|---|
| Description | The multi-hop route support of the server does not support configuring a cycle. However, it detected a configuration that would create a cycle. |
| Resolution | Remove one of the routes that creates the cycle. |
| Errors |
[%s@%s]: rejected connect from route: invalid cycle in route: %s Illegal, route to '%s' creates a cycle. Terminate the connection Illegal, route to '%s' creates a cycle. |
| Rendezvous transport error | |
|---|---|
| Description | tibemsd encountered a Rendezvous error. |
| Resolution | See Rendezvous documentation for details of what the error means and how to remedy it. |
| Errors |
Unable to create dispatcher for import event for %s '%s' on transport '%s', error is %s Unable to create inbox for import event for %s '%s' on transport '%s' Unable to create Rendezvous Certified transport '%s': %s Unable to create Rendezvous Certified transport '%s' because unable to create Rendezvous transport '%s' Unable to create Rendezvous transport '%s': %s Unable to create TIBCO Rendezvous Certified Listener for %s '%s' on transport '%s': %s Failed to confirm RVCM message: %d (%s) Failed to confirm RVCM message sequence % PRINTF_LLFMT u from cm sender '%s'. Error: %d (%s) Unable to store trackId % PRINTF_LLFMT d for RVCM message sequence % PRINTF_LLFMTu from cm sender '%s'. Error: %d (%s) Unable to retrieve trackId % PRINTF_LLFMT d. Error: %d (%s) A problem occurred while importing RVCM message sequence % PRINTF_LLFMT u from cm sender '%s'. Expecting a redelivery Unable to queue the request type: %d. Transport '%s', destination '%s', CM Sender '%s', CM Sequence % PRINTF_LLFMT u . Error: %d (%s) Unable to queue the request type: %d. Transport '%s', destination '%s'. Error: %d (%s) Failed to disallow Rendezvous Certified Message listener '%s': %s Unable to export topic message, error=%s. Unable to pre-register certified listener '%s' on transport '%s': %s Rendezvous send failed on transport '%s', error='%s' Unable to restart the CM Listener for %s '%s' (RVCM Transport '%s'). Error code: %d '%s' Unable to create the timer for the restart of the CM Listener for %s '%s' (RVCM Transport '%s'). Error code: %d '%s' Unable to stop the CM Listener for %s '%s' (RVCM Transport '%s'). Error code: %d '%s' |
| Restoring consumer failed | |
|---|---|
| Description | Seen when tibemsd starts up and detects that the zone for a route as specified in routes.conf has been changed. |
| Resolution | Either delete the route or change its zone back and restart the tibemsd. |
| Errors |
Restoring consumer failed: Conflicting zone for route to [%s]: The route was initially zone \%s\ type %s, but now \%s\ type %s. Zone change not allowed while there are durable subscribers. Please delete the route first and create new one. |
| Running on reserve memory | |
|---|---|
| Description | Warnings indicating that the tibemsd has run out of memory and is now using its reserve memory |
| Resolution | Either reduce the tibemsd's memory requirement by consuming messages or removing messages from its queues, or increase the amount of memory available to the tibemsd by shutting down other processes on the machine or increasing the machine's memory. |
| Errors |
Running on reserve memory, ignoring new message. Running on reserve memory, no more send requests accepted. Pending msg count = % PRINTF_LLFMT d Pending msg count = % PRINTF_LLFMT d |
| Runtime Error in Fault-Tolerant Setup | |
|---|---|
| Description | In a fault-tolerant setup, error occurs at runtime. |
| Resolution | Check the status of both servers (primary, secondary). In case of both active, the file store data may be corrupted already and we recommend shutting down both servers and investigating the situation. |
| Errors |
Fault-tolerance error: Dual-Active server detected at: '%s' The active EMS server does not hold the lock on meta store The standby EMS server could not find the specified meta store. The active EMS server name is %s while the standby EMS server name is %s. The names must be the same A standby EMS server (%s) is already connected to the active EMS server Fault Tolerant error (%s), can't create connection to '%s'. Cannot determine which server should be active because both servers have been forced to start separately. Please force one of them to start (\forcestart\ tibemsadmin command). The other server will discard its data. This standby server is joining an active server and both have previously been forced to start. This server is discarding its data. Erasing content of store %s Internal error: Identical non-0 FT determination counters Store '%s' not defined on the active server, skipping it Store '%s' on the active server has a different file name than on the standby server Store '%s' is not present in the standby server configuration Error checking active server's configuration: %d - %s The configuration used on startup is incompatible with the one sent by the active server. Exiting! |
| SmartSockets transport error | |
|---|---|
| Description | tibemsd encountered a SmartSockets error. |
| Resolution | See SmartSockets documentation for details of what the error means and how to remedy it. |
| Errors |
Unable to create SmartSockets subscriber on transport '%s': failed to convert %s '%s', error=%s Unable to import SmartSockets message on transport %s: failed to convert subject '%s', error=%s Unable to import SmartSockets message on transport %s: failed to tokenize subject '%s' Unable to import SmartSockets message on transport %s: failed to convert reply subject '%s', error=%s Unable to import SmartSockets message on transport %s: no destination found '%s' Unable to export EMS message into SmartSockets on transport '%s'. Failed to convert subject '%s', error=%s. Unable to export EMS message into SmartSockets on transport '%s'. Failed to convert reply subject '%s', error=%s. Error translating EMS message body into SS message. Status=%s Error translating EMS message headers into SS message. Status=%s Error translating EMS message properties into SS message. Status=%s Unable to confirm SS message. %s Unable to connect to SmartSockets RTserver via transport: '%s': %d - %s Unable to register GMD failure callback: '%s': %d - %s Unable to create open callback on transport: '%s': %d - %s Unable to create default callback on transport: '%s': %d - %s Unable to create SS callback for %s '%s' on transport '%s' SS error: %s Unable to create SS message type on export Unable to create SmartSockets subscriber for %s '%s' on transport '%s', error: %s Unable to create SmartSockets transport '%s': %d - %s Failed to confirm SS message. error=%s. Failed to create SmartSockets transport %s Unable to handoff confirm SS message: %s. Unable to import SS message. Error=%d, %s. Unable to import SS message data fields. Error=%d, %s. Unable to import SS message headers. Error=%d, %s. Unable to import SS message, failed to create message destination. Unable to import SS message, failed to create reply destination. Unable to import SS message, error retrieving delivery mode. Unable to import SS message, error setting imported property. error=%s. Unable to import SS message, error setting message extentions property. error=%s. Unable to import SS message, failed to create message wire. error=%s. Unable to import SS message, error retrieving number of fields. Unable to initialize SmartSockets transport '%s': error=%d: %s Unable to set SmartSockets Dispatcher for transport: '%s': %d - %s Unable to set SS message type on export Unable to set Username/Password for SmartSockets transport '%s': %d - %s Unable to import SmartSockets message on transport %s: failed to retrieve SS subject. SS Subject CB destroy Failed: for '%s' on transport '%s' SS error: %s SS Subject CB lookup Failed: for '%s' on transport '%s' SS error: %s SmartSockets TipcMsgSetDeliveryMode failed, '%s' SmartSockets TipcMsgSetLbMode failed, '%s' SmartSockets TipcSrvConnFlush failed, '%s' SmartSockets TipcSrvConnMsgSend failed, '%s' SS Unsubscribe failed: for '%s' on transport '%s' SS error: %s GMD delivery failed on transport '%s', SS message seq=%d, reason='%s' for process '%s' Unable to process undelivered SS GMD message, can not register EMS message, error='%s', tport='%s', GMD seq=%d Unable to process undelivered SS GMD message, can not add to undelivered EMS queue, error='%s', tport='%s', GMD seq=%d Unable to process undelivered SS GMD message, failed to build EMS message, error='%s', tport='%s', GMD seq=%d Unable to convert undelivered SS GMD message into EMS message, error='%s', tport='%s', GMD seq=%d |
| SSL initialization failed | |
|---|---|
| Description | The server failed attempting to initialize the OpenSSL library. |
| Resolution | Examine the OpenSSL error and the EMS User's Guide chapter describing the use of SSL. |
| Errors |
Failed to process ft ssl password Failed to process ssl password Ignoring SSL listen port %s Failed to initialize SSL: can not load certificates and/or private key and/or CRL file(s) and/or ciphers. Failed to initialize OpenSSL environment: error=%d, message=%s. Failed to initialize SSL. Error=%s Failed to initialize SSL: unable to obtain password Failed to initialize SSL: server certificate not specified. Failed to initialize SSL: server private key not specified. Using secondary SSL password. Using secondary SSL identity. Using secondary SSL expected host name. Using secondary SSL private key. |
| Standby server '%s' disconnected | |
|---|---|
| Description | Lost connection with the standby fault-tolerant server. |
| Resolution | Determine if the standby server is running. If it is running, check for a network partition. |
| Errors |
Standby server '%s' disconnected. |
| Store file format mismatch | |
|---|---|
| Description | The store files specified were created from a different version of EMS that is not supported by this version. |
| Resolution | Revert to use the version of EMS that created the store file or locate the store file conversion tool and use it to convert the store file to this version. |
| Errors |
Unsupported store format: %s (%d) |
| System call error, should be errno-driven | |
|---|---|
| Description | A low-level system function has failed. |
| Resolution | Report the error to your system administrator and ask them to remedy the problem. |
| Errors |
Accept() failed: too many open files. Please check per-process and system-wide limits on the number of open files. Accept() failed: %d (%s) Select() failed: %d (%s) %s%se=%p refs=%lld flags=%u type=%u id=%u subtype=%u q=%u cb_count=%u ioType=%u ioSrc=%d ioValid=%d ioVChecked=%d cb=%p free_cb=%p Epoll_wait() failed: %d (%s) Epoll_ctl() %s on fd %d failed: %d (%s) ioctl() on /dev/poll failed: %d (%s) write() %s update /dev/poll on fd %d failed: %d (%s) Cannot retrieve user name of the current process. Client connection not created, %s. Could not obtain hostname Could not resolve hostname '%s'. Possibly default hostname is not configured properly while multiple network interfaces are present. Unable to listen for connections: %d (%s). Unable to open socket for listening: %d (%s). Closing connection from %s due to timeout, exceeded timeout of %d. Could not %s sequential file optimization: %d. |
| Transaction action while previous action is incomplete. | |
|---|---|
| Description | State-modifying action is requested on a transaction for which another such action is being processed. |
| Resolution | Send details of the error and the situation in which it occurred to TIBCO Support. |
| Errors |
Cannot request second state change for transaction while the first request is in progress (%d, %d) %s. Unexpected request to roll xa txn forward with previous operation (%d) incomplete: %s. Unexpected request to roll xa txn back with previous operation (%d) incomplete: %s. Unexpected request to prepare xa txn with previous operation (%d) incomplete: %s. Unexpected request to commit xa txn with previous operation (%d) incomplete: %s. Unexpected request to commit session with previous operation (%d) incomplete. |
| Transaction timeout. | |
|---|---|
| Description | Transaction not completed before timeout. Offending transaction is discarded. |
| Resolution | Most likely, transaction manager error prevented it from advancing this transaction in a timely manner. Verify correct operation of the transaction manner. |
| Errors |
Rollback due to timeout on unprepared transaction. connID=% PRINTF_LLFMT d %s |
| Unnecessary or duplicate message | |
|---|---|
| Description | tibemsd received a message with either missing or incomplete data. |
| Resolution | Send details of the error and the situation in which it occurred to TIBCO Support. |
| Errors |
Error processing xa start request, %s. connID=% PRINTF_LLFMT d sessID=% PRINTF_LLFMT d Error trying to enter standby for '%s', %s. |
| Unrecognized option | |
|---|---|
| Description | The server's command line contains an unrecognized option. |
| Resolution | Run the server with the -help option and compare it with the command line containing the unrecognized option. |
| Errors |
Unrecognized option: '%s'. |
| Appliance State Replication Events. | |
|---|---|
| Description | A transition occurred in the State Replication feature. |
| Resolution | Refer to the section of the documentation pertaining to State Replication. |
| Errors |
Transitioning to Server State: %s Transitioning to Server State: %s Forced exit to prevent dual-active servers Forced early exit - caught signal during server startup |