Copyright © Cloud Software Group, Inc. All Rights Reserved

Mail Item Information

Command

The following commands output the mail item information:

•	To return the information about mail items:

plist -m <queuename> | ALLQUEUES

•	To return work queue parameters:

plist -mW <queuename>|ALLQUEUES

•	To return Locker, Username, Host, Procnum, Stepname, RQID, and Deadline-time:

plist -mv <queuename> | ALLQUEUES

•	To return Case-Description, Case-Starter, Step-Description, Procedure-Description, Step-Flags, Proc-Flags, Arrival-time, and PVer:

plist -mvv <queuename> | ALLQUEUES

Returns

The plist -m, plist -mv, plist -mvv, and plist -mW commands return the following information.

Column	Description
QName	The name of the queue.
RQID	The unique reference assigned internally.
Case#	The case number. It can be the CID or CCR. The CID is the case ID, a unique reference used internally by TIBCO iProcess Engine. The CCR is referred to as a case control record number.
Flags	The meaning for each flag is: • s mail suspended. • m item has no memos (for WIS only). • r item awaiting forwarding (for WIS only). • T test mail. • G item is locked fora long term. • f not available for opening or forwarding. • U invalid addressee. • S start step. • X the deadline. • D this mail has a deadline. • P this mail has been purged. • L item is open and locked by the user. • N new piece of mail. • F free record.
Locker	Displayed if the plist -mv or plist -mvv command is used. User who has the work item locked (for example, when in group mailbox).
UserName	Displayed if the plist -mv or plist -mvv command is used. The user who owns this queue, or the group who owns this work item.
Host	Displayed if the plist -mv or plist -mvv command is used. The node ID, which is associated with the work item.
Procnum	Displayed if the plist -mv or plist -mvv command is used. The procedure number. The number of times the record is used.
Procname	Displayed if the plist -mv or plist -mvv command is used. The name of the procedure.
Casenum	Displayed if the plist -mv or plist -mvv command is used. The Case number.
Stepname	The name of the step.
Pno	Displayed if the plist -mv or plist -mvv command is used. The place number. The place is a unique number allocated to each step.
Deadline-time	Displayed if the plist -mv or plist -mvv command is used. The date and time when the deadline (if defined) expires on the work item.
Case-Description	Displayed if the plist -mvv command is used. The description of the case, which the work item belongs to.
Case-Starter	Displayed if the plist -mvv command is used. The user who started the case, which the work item belongs to.
Step-Description	Displayed if the plist -mvv command is used. The description of the step.
Procedure-Description	Displayed if the plist -mvv command is used. The description of the procedure, which generated the work item.
Step-Flags	Displayed if the plist -mvv command is used. The meaning for each flag is: • W means withdraw. • V means view. • R means rebuild. • O means outonly. • F means forward. • E means edit. • S means status. • d means deadline. • a means action. • D means document. • A means address.
Proc-Flags	Displayed if the plist -mvv command is used. The meaning for each flags is: • N networks. • a admin functions. • s start cases. • I this procedure is a Sub-procedure. • H this procedure has a Sub-procedure. • m management reports. • M Management reports exist. • P Auto purge ON. • W Working days. • h hidden case description. • o optional case description. • 0 field addressee NA. • T this procedure is a template. • :WTH this procedure is withdrawn. • :REL this procedure is released. • :UNR this procedure is unreleased. • :INC this procedure is incomplete. • :MOD this procedure is a model. • :WIC WITHDRAWN_INC. • :DEL this procedure is deleted.
Arrival-time	Displayed if the plist -mvv command is used. The timestamp when the work item is delivered to the queue.
PVer	Displayed if the plist -mvv command is used. The version number of the procedure, which generated the work item.

Example

The following examples show the output node information of the commands.

•	Input the SWDIR/util/plist -m queue command where queue is the name of the queue. The output is shown as follows.

---

 

QName ReqID PName Case# Stepname Flags Case Description

------------------------------------------------------------------

queue 301 MORT01 201 TAKEAPP ----S------ Rain

queue 951 MORT01 601 REVAPP ---------N- test

queue 952 MORT01 551 REVAPP ---------N- test

queue 1051 MORT01 701 TAKEAPP ----S------ t

queue 1201 MORT01 801 REVAPP ---------N- qq

queue 1251 MORT01 651 REVAPP ---------N- xxx

---

 

•	Input the SWDIR/util/plist -mW queue command where queue is the name of the queue. The output is shown as follows.

---

 

QName ReqID PName Case# Stepname Flags Case Description

-------------------------------------------------------------------------

queue 301 MORT01 201 TAKEAPP ----S------ Rain

WQParam1 =

WQParam2 =

WQParam3 =

WQParam4 =

queue 951 MORT01 601 REVAPP ---------N- test

WQParam1 =

WQParam2 =

WQParam3 =

WQParam4 =

---

 

•	Input the SWDIR/util/plist -mv queue command where queue is the name of the queue. The output is shown as follows.

---

 

QName Flags Locker UserName Host Procnum Procname Casenum Stepname Pno RQID Deadline-time

-----------------------------------------------------------------------------------

queue ----S------ swadmin@ipe113 ipe113 3:1 MORT01 201:201 TAKEAPP 3 301 3000/365 23:15

queue ---------N- ipe113 3:1 MORT01 601:601 REVAPP 4 951 3000/365 23:15

queue ---------N- ipe113 3:1 MORT01 551:551 REVAPP 4 952 3000/365 23:15

queue ----S------ swadmin@ipe113 ipe113 3:1 MORT01 701:701 TAKEAPP 3 1051 3000/365 23:15

queue ---------N- ipe113 3:1 MORT01 801:801 REVAPP 4 1201 3000/365 23:15

queue ---------N- ipe113 3:1 MORT01 651:651 REVAPP 4 1251 3000/365 23:15

---

 

•	Input the SWDIR/util/plist -mvv ALLQUEUES command. The output is shown as follows.

---

 

Flags Locker UserName Host Procnum Procname Casenum Stepname Pno RQID Deadline-time Case-Description Case-Starter Step-Description Procedure-Description Step-Flags Proc-Flags Arrival-time PVer

-----------------------------------------------------------------------------------

-------S------ administrator@sql_11_3_0 sql_11_3_0 3:1 SS1 51:51 STEP1 3 51 3000/12/31 23:15 dd1 administrator@sql_11_3_0 --R---S-aDA ------W:UNR 2012/06/26 10:14 0.0

-------S------ administrator@sql_11_3_0 sql_11_3_0 3:1 SS1 101:101 STEP1 3 101 3000/12/31 23:15 tt2 administrator@sql_11_3_0 --R---S-aDA ------W:UNR 2012/06/26 15:40 0.0

---

 

Copyright © Cloud Software Group, Inc. All Rights Reserved