SNMP Trap Sink

The SNMP agent generates startup and shutdown traps to help monitor the appliance.

These two traps are sent to the SNMP manager configured in the SNMP Trap Sink.

Starting from version 6.2.0, LogLogic LMI supports SNMP Trap versions 1, 2c, and 3. Depending on the version, you must specify the following fields:

Fields for the SNMP Trap Sink
Field Description Applicable to SNMP versions
IP:Port Type the IP address and port number of your SNMP trap receiver.

If you do not enter a port number, then the port number is set to the default value, 162.

Versions 1, 2c, and 3
Community String Type the SNMP trap receiver community string (public or private) Versions 1 and 2c

This feature is active only if you set Enable SNMP Daemon to Yes.