Installing the System in a Rack

Procedure

  1. Pull the inner slide rails out of the rack until they lock into place.
  2. Locate the rear rail standoff on each side of the system and lower them into the rear J-slots on the slide assemblies.
  3. Rotate the system downward until all the rail standoffs are seated in the J-slots.
  4. Push the system inward until the lock levers click into place. Press the slide-release lock buttons on both rails and slide the system into the rack.
    Installing the System in a Rack
Next topic: Removing the System From the Rack
Previous topic: Installing and Removing Tooled Rails