TIBCO LogLogic® LX R2 Appliance Product Family

This section describes the LX R2 series of H4 appliances.

The LogLogic® LX R2 Appliance product family includes the following appliances:

LogLogic LX R2 Appliance Product Family Specifications
Hardware Specifications LX1025R2 LX4025R2
CPU Single Xeon E5

(14 cores)

Dual Xeon E5

(28 cores)

Memory 256 GB 256 GB
Disk Drive (HDD) 2 x 1 TB 8 x 4 TB
RAID (HDD) RAID 1 RAID 10
Disk Drive (SSD) N/A 8 x 800 GB
RAID (SSD) N/A RAID 6
Fibre Channel Adapters N/A N/A
AC Power Connections 2 (for redundancy) 2 (for redundancy)
AC Input 100-240 V

50-60 Hz

100-240 V


50-60 Hz

Power Consumption 495 W 750 W
Heat Dissipation 1908 BTU/hr (max per power supply) 2891 BTU/hr (max per power supply)
AC Current 10A 10A
Operating Altitude -50 ft to 10,000 ft


-15.2 m to 3048 m

-50 ft to 10,000 ft


-15.2 m to 3048 m

Operating Temperature 10-35 degrees C (De-rate maximum allowable temperature by 1 degree C per 300 meters above sea level)
Relative Humidity 10-80% 10-80%
19” Rack Mount Chassis 1U 2U
Chassis Mounting Rail Kit is provided. For instructions, see .
Chassis (L x W x H) 27.58 x 18.99 x 1.68 inches 29.75 x 18.98 x 3.44 inches
Weight 33.1 lbs 63.65 lbs
Ethernet 6x10/100/1000 6x10/100/1000
Bonding Port Labeling Bond 0–Eth0 & Eth1;

Bond 1–Eth2 & Eth3;

Bond 2–Eth4 & Eth5;

Bond 0–Eth0 & Eth1;

Bond 1–Eth2 & Eth3;

Bond 2–Eth4 & Eth5;

Console Connector (male) (null modem cable provided) 9-pin DTE 9-pin DTE