TIBCO LogLogic® LX R1 Appliance Product Family

This section describes the LX R1 series of H4 appliances.

The LogLogic® LX R1 Appliance product family includes the following appliances:
LogLogic LX R1 Appliance Product Family Specifications
Hardware Specifications LX1025R1 LX4025R1
CPU Single Xeon E5 Dual Xeon E5
Memory 8GB 32 GB
Disk Drive (HDD) 2 x 1 TB 8 x 4 TB
RAID (HDD) RAID 1 RAID 10
Disk Drive (SSD) N/A 8 x 800 GB
RAID (SSD) N/A RAID 6
AC Power Connections 2 (for redundancy) 2 (for redundancy)
AC Input 100-240 V

50-60 Hz

100-240 V
50-60 Hz
Power Consumption 495 W 750 W
Heat Dissipation 1908 BTU/hr (max per power supply) 2891 BTU/hr (max per power supply)
AC Current 6A (max) 10A (max)
Operating Altitude -50 ft to 10,000 ft
-15.2 m to 3048 m -50 ft to 10,000 ft
-15.2 m to 3048 m
Operating Temperature 10-35 degrees C( De-rate maximum allowable temperature by 1 degree C per 300 meters above sea level)
Relative Humidity 10-80% 10-80%
19” Rack Mount Chassis 1U 2U
Chassis Mounting Rail Kit is provided. For instructions, see .
Chassis (L x W x H) 27.58 x 18.99 x 1.68 inches 29.75 x 18.98 x 3.44 inches
Weight 33.1 lbs 63.65 lbs
Ethernet 6x10/100/1000 6x10/100/1000
Bonding Port Labeling Bond 0–Eth0 & Eth1;

Bond 1–Eth2 & Eth3;

Bond 2–Eth4 & Eth5;

Bond 0–Eth0 & Eth1;

Bond 1–Eth2 & Eth3;

Bond 2–Eth4 & Eth5;

Console Connector (male) (null modem cable provided) 9-pin DTE 9-pin DTE