| srcIPMin
|
The minimum limit for your Source IP addresses. This is for incoming and outgoing traffic that accesses your firewall.
The srcIPMin and srcIPMax parameters make up the source IP range.
|
Standard IP address format. For example:
0.0.0.0.0
|
yes
|
string
|
| srcIPMax
|
The maximum limit for your Source IP addresses. This is for incoming and outgoing traffic that accesses your firewall.
The srcIPMin and srcIPMax parameters make up the source IP range.
|
Standard IP address format. For example:
255.255.255.255
|
yes
|
string
|
| srcPortMin
|
The lower limit range for your source ports. This is for incoming and outgoing traffic that accesses your firewall.
The srcPortMin and srcPortMax parameters make up the source port range.
|
Valid ports are ports 0 through 65,535.
|
yes
|
string
|
| srcPortMax
|
The upper limit range for your source ports. This is for incoming and outgoing traffic that accesses your firewall.
The srcPortMin and srcPortMax parameters make up the source port range.
|
Valid ports are ports 0 through 65,535.
|
yes
|
string
|
| destIPMin
|
The minimum limit for your destination IP addresses. This is for incoming and outgoing traffic that accesses your firewall.
The destIPMin and destIPMax parameters make up the destination IP range.
|
Standard IP address format. For example:
10.1.2.3
|
yes
|
string
|
| destIPMax
|
The maximum limit for your destination IP addresses. This for incoming and outgoing traffic that accesses your firewall.
The destIPMin and destIPMax parameters make up the destination IP range.
|
Standard IP address format. For example:
255.255.255.255
|
yes
|
string
|
| destPortMin
|
The lower limit range for your destination ports. This is for incoming and outgoing traffic that accesses your firewall.
The destPortMin and destPortMax parameters make up the destination port range.
|
Valid ports are ports 0 through 65,535.
|
yes
|
string
|
| destPortMax
|
The upper limit range for your destination ports. This is for incoming and outgoing traffic that accesses your firewall.
The destPortMin and destPortMax parameters make up the destination port range.
|
Valid ports are ports 0 through 65,535.
|
yes
|
string
|
| protocol
|
Protocol associated with the specified IP address
TIBCO LogLogic Appliances support ICMP, TCP, and UDP protocols.
|
Possible values:
- tcp
- udp
- icmp
- tcp, udp
- tcp, icmp
- udp, icmp
- tcp, udp, icmp
- all
The default is
all, for all protocols.
|
yes
|
string
|
