Warning: To avoid potential damage from protruding cables, secure any slack in the status indicator cable after routing this cable through the CMA.
Procedure
By using the tie wraps provided, bundle the cables together as they enter and exit the baskets so they do not interfere with adjacent systems.
With the CMA in the service position, route the cable bundle through the inner and outer baskets.
Use the pre-installed hook and loop straps on either end of the baskets to secure the cables.
Swing the CMA back into place on the tray.
Install the status indicator cable at the back of the system and secure the cable by routing it through the CMA. Attach the other end of this cable to the corner of the outer CMA basket.
