SNMP Trap Sink Settings

The SNMP agent generates startup and shutdown traps to help monitor the appliance.

These two traps are sent to the SNMP manager configured in the SNMP Trap Sink.

Starting from version 6.2.0, LogLogic LMI supports SNMP Trap versions 1, 2c, and 3. Depending on the version, you must specify the following fields:

Field	Description	Applicable to SNMP versions
IP Address:Port	Type the IP address and port number of your SNMP trap receiver.	Versions 1, 2c, and 3
Outbound Traps Community String	Type the SNMP trap receiver community string (public or private)	Versions 1 and 2c

This feature is active only if you set SNMP Daemon to On.