Copyright © Cloud Software Group, Inc. All Rights Reserved
Copyright © Cloud Software Group, Inc. All Rights Reserved


Using Messages Without Identifiers : Messages beginning with: W
Messages beginning with: W
WARNING: "%" may be an invalid screen table name
Screen Definer
When using the Screen Definer, you included a reference in the Screens list that cannot be validated (by validation code). This warning usually occurs because of locking.
No action required.
WARNING: %'s row offset % is not enough, should be at least %
Report Definer
There is not enough room to display this title report table and its spacing attributes.
Increase the offset from the bottom of the page to make enough room for the display. The least amount required is given.
WARNING: %; Press <%> to confirm
Confirmaction Utility
warning and instruction on how to confirm
No action
WARNING: % % has been extracted from Library %
Promotion
The named rule has been extracted from the specified library because the previously extracted file is not available.
Make the extract file available if you want to repackage from the previously extracted file.
WARNING: % does not currently exist
Security
A Security Administrator or a System Administrator updating the profile of a user, has entered a TDS segment number that does not exist.
This message is only a warning, so you do not have to change the segment number. The TDS segment must exist, though, before the user can put objects there.
WARNING: % has been re-extracted
Promotion
The specified object has been extracted from the MetaStor because the previously extracted file is not available.
Make the file available if you want to repackage the object from the previously extracted file.
Warning: % has maximum number of fields defined
Field Dictionary
All of the fields cannot be copied into the table definition because the maximum number of fields has been reached.
Remove some or all of the selected fields and retry.
WARNING: *** Change request has Corequisites ***
Promotion
The application developer specified other change requests that must accompany this change request.
Ensure that the corequisite change requests have been processed.
WARNING: *** Error flag(s) in @PROM_OBJ(%) found to be set ***
Promotion
Phase 2 or Phase 3 apply processing occurred although errors were detected in Phase 1. The request may not work as designed.
Refer to the Promotions manual for information on running the GEN_SYS_TBLS rule.
WARNING: *** No TABLES entry for report table "%" ***
Promotion
The specified report table does not have an entry in TABLES. This is probably a break table created in release 1.16.
You should use the report painter to redefine the report table.
WARNING: *** Objects have been unbound ***
Promotion
Some of the objects included in the change request are bound on the target system. Thus, these objects have to be unbound before the change can be applied. This message is followed by a message informing you of the action to take.
If you are in a multiple session system, restart the Execution Environment and apply the change again. If you are in a single session system, log off and log on to apply the change.
WARNING: Screen image may contain truncated lines
General
The screen image that was produced may have image lines that are truncated.
You can try using a larger page width.
Warning: A COMMIT occurred during % of:
Copy Defn/Data
This message indicates that a COMMITLIMIT was reached while processing processing a copy request and that a COMMIT was issued. This means that any subsequent errors arising while copying the current object could leave a partial copy stored.
No action.
WARNING: about to % rule %; press % or type 'confirm'.
Rule Editor
You have received a warning message about an action that is about to be performed on a rule.
Press the indicated PF key or type CONFIRM in the command line to perform the action. Press any other key to cancel the action.
WARNING: About to delete report "%"; press <PF22> to confirm
Report Generator
The indicated report and its tables will be deleted if you confirm your deletion request.
Press the indicated function key to confirm the deletion, or press any other function key to cancel.
WARNING: about to OVERWRITE existing objset "%"; press <%> to confirm
Object Set Definer
You are attempting to save an object set with a new name that has the same name as an existing object set. Confirmation is being requested because if the existing object set is overwritten it will be lost.
Press the specified key to confirm or any other key to cancel. If you do not wish to overwrite an existing object set then cancel and enter a new nonexisting name for the object set.
WARNING: About to overwrite report "%"; press <ENTER> to confirm
Report Generator
The definition of the indicated report will be overwritten if you press the indicated function key to confirm.
To confirm the request, press the indicated function key. To cancel the request, press any other key.
WARNING: About to overwrite rule "%"; press <ENTER> to confirm
Report Generator
The indicated rule name already exists in the local library, and will be overwritten if you confirm the action.
Press the specified key to confirm the action, or press any other key to cancel.
WARNING: ACROSS_BY required for Across Report (MAX ACR ^= 0)
Report Definer
If the MAX ACR field is not 0, you are producing an Across Report, and you must put a value in the SORT_ACROSS_BY field.
Do one of the following:
•
Enter a value in the SORT_ACROSS_BY field.
•
Set the MAX ACR field to 0.
WARNING: ALL report fields on break table must be derived fields
Report Definer
Only derived fields may be present on break tables.
Change all fields for the break table to derived fields.
WARNING: an intermediate commit was made
Copy Definition
The commit limit has been reached and therefore a warning has been issued to let you know that some of the object has been copied.
No action required.
WARNING: borrowing rights UNVERIFIED for this menu
Menu Definer
You are updating a Menu Definition and Borrow Rights could not be verified when you requested the update.
No action required.
WARNING: Break table "%" requires a minimum page length of "%"
Report Definer
All the fields on the defined break table cannot fit within the specified page length.
Remove some fields from the break table or alter the page length.
WARNING: cannot access body control fields - no security on %
Report Definer
During validation, improper security on the body table is detected.
To continue with the task, either obtain security on the table or change the table name to one on which there is proper security.
WARNING: Cannot check change rights
Report Definer
Promotion rights cannot be checked because of a locking error.
Try using the Report Definer later.
WARNING: cannot perform all checks - no security on %
Report Definer
On the way into the Report Definer, certain checks are performed. Due to lack of security on a table, not all checks can be performed.
Get proper security on the identified table or replace it with one that you have proper security on.
WARNING: cannot SAVE changes; rights are held by "%"
Screen Definer
You just entered the Screen Definer or the Screen Table Painter, and the rights to the screen are held in such a way that your changes cannot be saved.
No action required. If you want to make changes to the screen, ask the person who has the rights to release them. Otherwise, you can change the name of the screen to a nonexisting one to save your changes.
WARNING: Cannot SAVE changes; rights held by %, user %
Table Editor
Changes for the table that the user chose to edit cannot be saved because the promotion rights on the table are held by the specified library under the specified userid.
No action required. If you need to make changes to the table, contact the user with the promotion rights.
WARNING: cannot SAVE changes since this object set is ENABLED
Security
You are viewing an object set definition for an enabled object set.
No action required.
WARNING: changes will be ignored; no update authorization
Security
A Security Administrator is viewing the definition of a group that the Administrator is not authorized to update. Security Administrators can view any Group definition, but they cannot always update it. This warning is displayed upon entry to the screen to notify the Security Administrator that no changes are allowed.
No action required.
WARNING: Control break "%" deleted
Report Definer
After the deletion of a control break field from within a body report table, the control break and any control break table associated with that breakpoint are deleted.
No action required.
WARNING: CONTROL permission may not be ENABLED for Groups
Security
You are looking at an object set enable list, and the object set includes Control permission to an object in the object set; since Control is not allowed for groups, the object set can be enabled for users only.
No action is required.
WARNING: decimal symbol should appear ONCE in basic string
Screen and Report Painters
The decimal symbol should appear only once in the basic string
Make sure that the decimal symbol appears only once in the basic string.
WARNING: decimal symbol should not be a digit place holder
Screen and Report Painters
You should not have the decimal symbol as a place holder.
This will cause the gateway problems interpreting the mask. Remove the decimal symbol from the digit place holder spot.
WARNING: Definition may be too large to process for table %
Screen and Report Painters
The number of fields in the screen table or report table definition exceeds the maximum number of fields allowed in a CTABLE.
Reduce the number of fields in the screen table or report table.
WARNING: Definition of table % may have been modified by %
Promotion
You are promoting the data of the named table but the specified user/group has right to the definition of the table. If the specified user/group has modified the table definition, your change request may fail during phase 1 of target apply because the definition of the table is not part of your change.
Check with the specified user/group to see if the change (if any) of the table definition would affect your change request.
WARNING: displaymask basic string should not contain digits 0-8
Screen and Report Painters
The basic string should not contain any digits between 0 and 8.
Remove the digits between 0 and 8 from the basic string.
WARNING: Exclude "%" from current defn; press <PF23> to confirm
Report Generator
The indicated source data table will be excluded from the report if you confirm your request. This will also remove any fields of that table referenced in the report.
Press the specified function key to confirm, or press any other function key to cancel.
WARNING: existing permissions may be LOST when ENABLED
Security
You are enabling an object set for the first time. If any of the objects in the object set are not part of another enabled object set and they have permissions specified, these permissions are lost when the object set becomes enabled (i.e., if you save the enable list).
If you are concerned about losing existing permissions, you can do one of the following:
•
View individual permissions lists for objects in an object set to determine the permissions.
•
Enable the object set and save, then view a report of lost permissions when you return to the main menu.
WARNING: Exit the Report Generator; press <PF12> to confirm
Report Generator
This confirmation message appears when you request to exit the Report Generator by pressing <PF12>.
Press <PF12> to exit; otherwise, press <Enter> to stay on the current screen.
WARNING: Fields "%" and "%" overlap; IMS updates will be disallowed
Table Definer
The indicated fields overlap each other.
Modify the IMS offset or IMS length (or both) of the inserted field to eliminate the overlap.
WARNING: Last % characters of % truncated; press <%> to confirm
Table Editor
When a long W string is edited using the Single Occurrence Editor, it is broken up into several rows. Additional shift-in/shift out characters may be added to make each row a well-formed W string. Thus extra space may be created for the user to input data. The input value can then be too long to fit the original field. This message is generated to warn the user about the situation. The last few characters will be truncated and the user is prompted for confirmation.
Do one of the following:
•
Press the confirm key to confirm the save. The value is truncated automatically by the Single Occurrence Editor.
•
Press some other key to cancel the save. Edit the value manually to make it fit the field.
WARNING: MAX_ACROSS/ACROSS_BY required if TITLE/FINAL COLS ^= 0
Report Definer
Title columns and final columns are only valid for Across Reports.
Do one of the following:
•
Enter valid values in the MAX ACR and SORT_ACROSS_BY fields.
•
Set the TITLE COLS and FINAL COLS fields to zero.
WARNING: Missing documentation or unit for highlighted %(S)
Promotion
Documentation is missing for tables, screens or reports.
Use the E line command to provide documentation.
WARNING: No promo rights/documentation for highlighted %(S)
Promotion
The highlighted rules are missing their documentation or promotion rights.
If the problem is missing documentation, provide documentation by using the E line command. If promotion rights are missing, contact the System Administrator.
WARNING: non-printable data displayed as "."
Builtin Routines
Unprintable data is displayed as the dot (.) character. Unprintable characters are hexadecimal &x'AD 1..3F &x'BD.
No action required.
WARNING: non-printable data displayed as "."
General
Unprintable data is displayed as the dot (.) character. Unprintable characters are hexadecimal &x'AD 1..3F &x'BD.
No action required.
WARNING: not all print fields have functions in SUMMARY PRINT
Report Generator
The SUMMARY flag is on, but some of the PRINT fields that are not SORT BY or ACROSS BY fields do not have functions in the SUMMARY PRINT section. You may want to select functions for those fields.
Ignore the warning if you want to ignore those fields; otherwise, select functions for those fields.
WARNING: object is part of ENABLED object set; cannot SAVE
Security
You have requested to manage permissions for an object whose permissions are managed through object sets. You cannot make changes to these permissions directly.
To obtain a list of the Enabled Object Set Permissions which include this object, press <PF4>. To add permissions, you must define another object set which contains this object, then specify Object Set Permissions on the object set and then Enable it. To remove permissions, disable any Enabled Object Set Permissions which include the permissions of this object you wish to revoke.
WARNING: Objectset "%" has objects missing security
Security
You attempted to save the security information for the object set but did not specified security for all its component objects.
You can define the missing security for the objects of the object set save again, or press the specified confirm key to ignore the warning message.
WARNING: only % of % fields could be LOADED into Image Area
Screen Definer
In the Screen Table Painter, you made a request to load a table. Some of the fields are omitted, however, because the screen table Image Area does not have enough room to load all of the fields. Note that this is different from exceeding the maximum number of fields in a screen table definition.
You can cancel your changes or compare the screen table and the source table fields to determine which fields are missing.
Warning: Parameter list too long to show on the screen
Character-based Text Editor
You executed TED with an input table that has too many parameters to be displayed.
No action required.
WARNING: Password update FAILED
Security
You updated the password in a user profile and saved, but the routine that updates passwords failed. If you are creating a new user, the password will be null. If you are trying to update the password of an existing user, the old password is still current.
If you still want to update the password, ask your security administrator to examine the encryption exit. If you are updating your own profile, note that the password update request failed and that to gain entry to Object Service Broker at next logon, you must use the old password.
WARNING: possible overlaps detected; see MSGLOG for details
Screen Definer
You just saved a screen definition and returned to the workbench. The screen definition you saved will overlap the physical boundaries of the current screen if you display it. Details about these overlaps are in the message log.
Press <PF2> to see the details of the overlap potential, and then either change the screen definition (if the screen is to be displayed on a physical screen that is the same size as the current one), or ignore the information (if the screen is to be displayed on a physical screen large enough to handle the indicated overlaps).
WARNING: PRM table for % should be included in this change
Promotion
When you promote a new parameterized TDS table, you should also promote its PRM table in the same change. Otherwise the promotion system will not be able to backup the data in the table next time when you modify the table definition.
Create a PRM table for the specified TDS table and include it in this change.
WARNING: Promotion rights for % "%" not obtained
Field Dictionary
The promotion rights for the object being edited are held by someone else.
If you need promotion rights, contact the specified user.
WARNING: Promotion rights for % "%" not obtained
Report Definer
The promotion rights for the object being edited are held by someone else.
If you need the promotion rights, contact the specified user.
WARNING: Promotion rights for % "%" not released
Field Dictionary
The promotion rights for an object are held by someone else; therefore they have not been released.
If you need promotion rights, contact the specified user.
WARNING: Promotion rights for % "%" not released
Report Definer
The promotion rights for an object are held by someone else; therefore, they have not been released.
If you need the promotion rights, contact the specified user.
WARNING: Report field % not entirely defined within finalcol
Report Definer
A report field is defined partly in final columns and partly out of final columns.
Move the report field or the final columns.
WARNING: Report field col extends beyond defined page width: %
Report Definer
A report field is defined to extend beyond the current page width.
If the report field is to be printed on the report, either change the page width within the Definer, or change the page width at run time through the utility $RPTPARMS.
WARNING: Report field in "%" extends beyond page width of %
Report Definer
A report field is defined beyond the page width boundary.
Move the report field or alter the page width.
WARNING: Report field row extends beyond defined page: %
Report Definer
One of the field's rows extends beyond the specified page length.
Make the specified field start at a position that does not make it extend beyond the page length, or increase the page length.
WARNING: Report selection will not fit within report function
Report Definer
The report selection string cannot fit within the report function selection.
If you want the report function calculation to be limited by the report selection, enter the report selection on the FORALL statement that inserts data into your report table.
WARNING: Report table "%" requires minimum page length of "%"
Report Definer
The specified report table is defined to have at least one report field that cannot be placed within the page length specified.
Change the defined page length or move the report field to a line above the page bottom.
WARNING: Rights for % "%" held by "%", requestor "%"
Report Definer
Promotion rights cannot be obtained on the object because they are held by someone else.
If you need the promotion rights, contact the person who holds them.
WARNING: Rights for globalfield "%" held by "%", requestor "%"
Field Dictionary
Someone else holds the promotion rights for the global field you are defining. You will not be able to save changes or delete it the field.
No action required, if you are not making changes to the field. If you need promotion rights, contact the specified user.
WARNING: Rights held by %, user %
Table Editor
The promotion rights on the table are held by the specified library under the specified userid. Changes to the table will be saved, but promotion rights will not be obtained.
No action required. If you need the promotion rights, contact the user who holds them.
Warning: Rights to % held by % user %
Session Manager
You made a request to edit a menu. When the menu definition is presented, this message indicates that the borrowing rights for parts of the menu are held by another user. You cannot save any changes until the borrowing rights are released or transferred to you.
You can view the menu, but you cannot save any changes. Acquire borrowing rights from whoever currently has them before trying to update the menu again.
WARNING: rights to FCNKEYS of Screen held by "%"
Screen Definer
You pressed the SPEC_FCNKEYS option <PF18> from the Screen Definer, but the rights to the FCNKEYS table are held by someone else. If SYSTEM is holding the rights, you cannot save any changes that you make; otherwise, you may be able to save your changes.
You cannot save changes if the rights are held by SYSTEM, but you may be able to save changes otherwise. Discuss the matter with the person holding the rights to FCNKEYS for this screen.
WARNING: Rights to object set "%" held by %
Object Set Definer
Someone else has rights to the object set that you are currently defining. You will not be able to save any changes that you make.
No action required.
WARNING: Rights to object set "%" held by %
Security
You have just entered the object set permissions context. The warning indicates that you cannot make changes to the object set permissions because the borrowing rights are held by another user.
If you must make changes, then you should consult with the borrower so that borrowing rights can be transferred to you. Otherwise, you will need to wait for the borrowing rights to be released.
WARNING: rights to Screen held by %
Screen Definer
You just entered the Screen Definer for the indicated screen. If the rights for the screen are held by SYSTEM, you cannot save any changes you make; otherwise, you may be able to save changes.
You cannot save changes if the rights are held by SYSTEM, but you may be able to save changes otherwise. Discuss the matter with the person holding the rights to FCNKEYS for this screen.
WARNING: rights to screen table held by %
Screen Definer
You just entered the Screen Table Painter, and the rights to the screen table are held by another person. If SYSTEM is holding the rights, you cannot save any changes you make; otherwise, you may be able to save your changes.
You cannot save changes if the rights are held by SYSTEM, but you may be able to save changes otherwise. Discuss the matter with the person holding the rights to FCNKEYS for this screen.
WARNING: Security not set correctly on objectset %, no @CAPABILITIES
Promotion
The change request did not include an occurrence of the @CAPABILITIES table.
Check the source system and make sure that there is an occurrence of @CAPABILITIES for every object set there. It may be necessary to roll back the change request and re-extract it after correcting the source system.
WARNING: Segment "%" not covered by metadata fields
Table Definer
Define the indicated segment with MetaStor fields at least up to the minimum length indicated on the screen.
Specify a field or fields to cover the minimum length of the segment.
WARNING: Source table "%" has more fields than allowed
Table Definer
The indicated source table for the current subview table definition has more fields than allowed in the Table Definer. As a result, only the maximum number of fields allowed is shown.
You can delete and change the fields that are shown. When you save the subview table definition, only the fields shown will be saved.
WARNING: Table "%" has more fields than allowed
Table Definer
The indicated table has more fields than allowed. As a result, only the allowed maximum number of fields are shown. NOTE: If you save the table definition, only the fields shown are saved; the excess fields are removed.
If you want to include any fields not shown, you must first remove some of the fields displayed.
If you want to exclude the fields not displayed, you can save the table definition when you are finished.
If you want to keep the same fields, press the CANCEL function key to leave the Table Definer.
WARNING: Table may contain data; see help for restricted modifications
Table Definer
The Table Definer cannot determine whether the table has data or not for various reasons. For example, the data segment might be off line.
The message warns that you are modifying the definition at your own risk. In general, you are safe if you are NOT shortening a field length, changing a field or parameter syntax and decimal length, changing a parameter or key length, adding new fields in between existing ones, adding new parameters, deleting existing fields or parameters, or modifying the "key" attribute of any field.
Care must be taken when performing the modifications mentioned above.
WARNING: Tables of type "%" should be maintained by % painter
Table Definer
Maintain tables of the indicated type with its specialized painter, or you may get unexpected results.
Cancel the Table Definer session.
Warning: There are % additional users on the system
Promotion
This warning message tells you how many other users are on the Object Service Broker system.
If you are going to do a promotion, make sure that no other users are on the system.
WARNING: unable to perform all checks, no security on "%"
Screen Definer
On the way into the Screen Definer, certain checks are performed to ensure the screen is structured correctly. Due to lack of security on the identified table, some of the checks that involve this table cannot be performed.
Obtain proper security on the identified table or replace it with one with proper security.
WARNING: values may be truncated; use DETAIL for full display
Unload
You are viewing the data instance list for a table, as requested from the UNLOAD screen via the INSTANCE SELECT function. Since this display shows only a fixed number of characters/parameter value, and the parameter may have greater length than this number, you may not see the entire value in this screen.
If you wish to see the parameter values for a given data instance in their entirety, position the cursor to the instance entry required and press the DETAIL function. You will be shown a screen which has parameter values only for that instance.
Warning - Cannot validate all of the definition. Press <PF3> to confirm.
Adabas Definer
Because the definition is of a DBID and FILENO combination that has not been extracted, the definer is unable to cross validate all of the components of the definition. Note that this message could appear if the DBID and FILENO combination have been incorrectly specified.
Either except the definition and ensure manually that it is correct or extract the DBID and FILENO combination and then re-save or redefine the table to validate the definition.
WELCOME TO THE ADMINISTRATOR, PRESS PF1 ON ANY SCREEN FOR HELP
S6BTLADM - COMMON MESSAGES
The welcome messages is an information message to ensure users are aware of the online help facility in the Object Service Broker Administrator utility.
No action required.
WHERE string invalid on % to table "%"
TAM
One of the following occurred:
•
A non-unique key selection was specified for a DELETE operation.
•
An INSERT/REPLACE operation specified a selection string.
Do one of the following:
•
Specify a unique key selection for a DELETE operation.
•
Remove the selection string in the INSERT/REPLACE operation.
Will not delete actual job in operating system
Batch Submission Tool
When you delete a batch request that has a status of SUBMITTED or EXECUTING, the delete command removes the request entry from only the Object Service Broker queue. You are still required to delete the job from the operating system job queue.
Press <PF22> to confirm that you want to delete the job, or press any other key to cancel the deletion request. If you confirmed the deletion request, delete the job entry in the operating system.
Window Manager ERROR: Unable to restore previous window.
Rule Editor
Internal error.
Contact TIBCO Support.
WORK SPACE NOT AVAILABLE TO COMPLETE REQUEST
S6BTLADM - COMMON MESSAGES
When attempting to perform large data manipulations the Administrator uses a large work buffer. During program initialization this work buffer could not be acquired.
Try rerunning the Administrator utility with a larger region size.
Write to "%" dataset failed; module "%"; R15 = %
Session Manager
Write to sort work file failed. The DDNAME, the module name, and the return code are supplied for diagnostic purposes.
Call your system administrator to check the return code in Register 15 against the appropriate vendor's manual. Correct the problem as required.
Copyright © Cloud Software Group, Inc. All Rights Reserved
Copyright © Cloud Software Group, Inc. All Rights Reserved