HL7 Error Codes
The exceptions that are thrown by the HL7 functionality in the TIBCO ActiveMatrix BusinessWorks™ Plug-in for HL7 with FHIR are listed with the corresponding descriptions and resolutions.
| Error Code and Message | Role | Category | Description | Resolution |
|---|---|---|---|---|
| TIBCO-BW-PALETTE-HL7-501000
The map is required. |
errorRole | BW-Plug-in
ERROR_TRANSLATOR |
A translation map is required. | Specify a map to be used for translation. |
| TIBCO-BW-PALETTE-HL7-501001
The input data is required. |
errorRole | BW-Plug-in
ERROR_TRANSLATOR |
Input data is required. | Specify input data to be used for translation. |
| TIBCO-BW-PALETTE-HL7-501002
The operation type is required. |
errorRole | BW-Plug-in
ERROR_TRANSLATOR |
An operation type is required. | Specify an operation type for translation. For example, hl7toXML, HL7toFLAT, etc. |
| TIBCO-BW-PALETTE-HL7-501004
TIBCO-BW-PALETTE-HL7-501004: return code [<return code>], error message : <error message> |
errorRole | BW-Plug-in
ERROR_TRANSLATOR |
This error points to a TIBCO Foresight® Translator return code.
For example: TIBCO-BW-PALETTE-HL7-501004:return code [158], error message : Error 44 : Access map failed refers to Translator return code 158 "Could not open the map file." |
Using the return code provided in the message, refer to the Return Codes section of the TIBCO Foresight® Translator documentation. |
| TIBCO-BW-PALETTE-HL7-501005
|
errorRole | BW-Plug-in
ERROR_TRANSLATOR |
An exception occurred during translation. | This is an internal product error. Contact TIBCO Support. |
| TIBCO-BW-PALETTE-HL7-501006
|
errorRole | BW-Plug-in
ERROR_TRANSLATOR |
An exception occurred during translation. | This is an internal product error. Contact TIBCO Support. |
| TIBCO-BW-PALETTE-HL7-501007
Callback is checked, but no class selected.
|
errorRole | BW-Plug-in
ERROR_TRANSLATOR |
The Callback checkbox is selected, but no class was specified. | Specify a Callback class name. |
| TIBCO-BW-PALETTE-HL7-502000
The input data is required. |
errorRole | BW-Plug-in
ERROR_INSTREAM |
Input data is required. | Specify input data to be used for validation. |
| TIBCO-BW-PALETTE-HL7-502001
Configuration error [{0}] |
errorRole | BW-Plug-in
ERROR_INSTREAM |
A configuration error has occurred. | Refer to the information in [{0}] to resolve the issue.
Example: Configuration error [missing guideline] |
| TIBCO-BW-PALETTE-HL7-502003 TIBCO-BW-PALETTE-HL7-502003: instream return code [<return code>], error message : <error message> | errorRole | BW-Plug-in
ERROR_INSTREAM |
This error points to a TIBCO Foresight® Instream® return code.
For example: TIBCO-BW-PALETTE-HL7-502003: instream return code [140], error message : Access(R) failed refers to Instream return code 140 "A critical error prevented validation from running successfully." |
Using the return code provided in the message, refer to the Return Codes section of the TIBCO Foresight® Instream® documentation. |
| TIBCO-BW-PALETTE-HL7-502004
Callback is checked, but no class selected. |
errorRole | BW-Plug-in
ERROR_INSTREAM |
The Callback checkbox is selected, but no class was specified. | Specify a Callback class name. |
| TIBCO-BW-PALETTE-HL7-502005
Callback: Guideline name is missing. |
errorRole | BW-Plug-in
ERROR_INSTREAM |
A guideline is required for validation. | Specify a guideline to be used for validation. |
| TIBCO-BW-PALETTE-HL7-503000
The input data is required. |
errorRole | BW-Plug-in
ERROR_PARSEHL7 HEADER |
Input data is required. | Specify input data to be used for header parsing. |
| TIBCO-BW-PALETTE-HL7-503001
The input data encoding is not supported. |
errorRole | BW-Plug-in
ERROR_PARSEHL7 HEADER |
The specified input data encoding option is not supported. | Select a valid encoding option when defining parameters for the TranslateHL7 activity. |
| TIBCO-BW-PALETTE-HL7-503003
MSH only contains [{0}] fields. |
errorRole | BW-Plug-in
ERROR_PARSEHL7 HEADER |
The specified HL7 document is invalid. The HL7 Message Header Segment does not contain the required number of fields. | Specify a valid HL7 document. |
| TIBCO-BW-PALETTE-HL7-503004
Message Type field is missing. |
errorRole | BW-Plug-in
ERROR_PARSEHL7 HEADER |
The specified HL7 document is invalid. The HL7 document does not contain a Message Type field (required). | Specify a valid HL7 document. |
| TIBCO-BW-PALETTE-HL7-503005
Invalid HL7 document. |
errorRole | BW-Plug-in
ERROR_PARSEHL7 HEADER |
The specified HL7 document is invalid. | Specify a valid HL7 document. |
| TIBCO-BW-PALETTE-HL7-503006
Version ID is missing. |
errorRole | BW-Plug-in
ERROR_PARSEHL7 HEADER |
The specified HL7 document is invalid. The HL7 document does not have a Version ID (required). | Specify a valid HL7 document. |
| TIBCO-BW-PALETTE-HL7-504001
The msaAckCode is incorrect, valid msaAckCode is as below: AA,AE,AR,A,E,R,accept,error, reject or CA,CE,CR. |
errorRole | BW-Plug-in
ERROR_HL7 GENACK_INVALID_ACK_ CODE |
The msaAckCode is incorrect. | Correct the msaAckCode. Select a valid msaAckCode when defining parameters for the GenerateACK activity. |
| TIBCO-BW-PALETTE-HL7-504002
The input data is required. |
errorRole | BW-Plug-in
ERROR_HL7 GENACK_INVALID_ACK_ CODE |
Input data is required. | Specify input data to be used for acknowledgment. |
| TIBCO-BW-PALETTE-HL7- 505003
INVALID PORT: Invalid Port; Port must be numeric (or separated by semicolon when it has more than one port). Error: [{0}] |
errorRole | BW-Plug-in
EX_INVALID_PORT |
The specified port is invalid.
A port must be numeric. If more than one port is specified, they must be separated by a semicolon. |
Specify a valid port number. |
| TIBCO-BW-PALETTE-HL7-505021
EX_READ_TIMEOUT=Timeout while reading data |
errorRole | BW-Plug-in
EX_READ_TIMEOUT |
The process timed out while reading data. | Possible causes for this error are:
(1) The data is being read before it is written. (2) The data being written is text/binary and it is being read as binary/text. (3) The data is written with/without separators and is being read without/with separators. |
| TIBCO-BW-PALETTE-HL7-505022
IOException occurred while retrieving XML Output for activity [{0}]. |
errorRole | BW-Plug-in
EXCEPTION_ OCCURED_RETRIEVE_ RESULT |
An IOException occurred while retrieving XML Output for the referenced activity. | This is an internal product error. Contact TIBCO Support. |
| TIBCO-BW-PALETTE-HL7-505023
The LLPReceiver Process Starter activity [{0}] failed to a generate a new event due to exception [{1}] since it is in the stopped state. |
errorRole | BW-Plug-in
TCP_RECEIVER_ ILLEGAL_ARGUMENT_ EXCEPTION |
An exception occurred during the LLPReceiver Process Starter activity. | This is an internal product error. Contact TIBCO Support. |
| TIBCO-BW-PALETTE-HL7-505024
The Wait For LLPReceiver activity [{0}] failed to a generate a new event due to exception [{1}] since it is in the stopped state. |
errorRole | BW-Plug-in
WAIT_FOR_TCP_ ILLEGAL_ARGUMENT_ EXCEPTION |
An exception occurred during the Wait For LLPReceiver activity. | This is an internal product error. Contact TIBCO Support. |
| TIBCO-BW-PALETTE-HL7-505025
LLPReceiver : Socket exception [{0}] |
errorRole | BW-Plug-in
EXCEPTION_ OCCURED_ LLPRECIVER_ SOCK |
An exception occurred during the LLPReceiver activity. | This is an internal product error. Contact TIBCO Support. |
| TIBCO-BW-PALETTE-HL7-505026
Cannot start LLPReceiver on Host [{0}], Port [{1}]. Reason: [{2}]. |
errorRole | BW-Plug-in
EX_CANNOT_START_ RECEIVER |
The specified LLPReceiver cannot be started for the reason displayed in the error.
Example: Cannot start LLPReceiver on Host [localhost], Port [8999]. Reason: [java.net.BindException: Address already in use: JVM_Bind] |
Correct the host/port and retry. |
| TIBCO-BW-PALETTE-HL7-505027
Separator is configured incorrectly {0}. |
errorRole | BW-Plug-in
ERROR_RECEIVER_SEPARATOR_ INVALID |
The separator is configured incorrectly. | Correct separator and retry. |
| TIBCO-BW-PALETTE-HL7-505028: Read timed out. | errorRole | BW-Plug-in
ERROR_RECEIVER_READ_DATA |
The action timed out before completion. | Check the read timeout setting and adjust if necessary. |
| TIBCO-BW-PALETTE-HL7-506001
LLPRESPONSE: Exception occurred while reply message for LLPResponse activity [{0}]. |
errorRole | BW-Plug-in
EXCEPTION_ OCCURED_ LLPRESPONSE_ REPLYMESSAGE |
An exception occurred during the LLPResponse activity. | This is an internal product error. Contact TIBCO Support. |
| TIBCO-BW-PALETTE-HL7-506002
EX_ERROR_WRITING_DATA_GENERIC= Error writing data. Reason: [{0}], please check separator setting. |
errorRole | EXBW-Plug-in
EX_ERROR_WRITING_DATA |
An error occurred while writing the data. | Correct separator and retry. |
| TIBCO-BW-PALETTE-HL7-507001
LLPRequestResponse: No existing socket found. host [{0}], port [{1}]. |
errorRole | BW-Plug-in
ERROR_LLPREQUEST_ RESPONE_ SOCKET_NOTFOUND |
No existing socket was found for the specified host/port. | Verify the server is running on the same port. |
| TIBCO-BW-PALETTE-HL7-507002
LLPRequestResponse : Socket exception [{0}]. |
errorRole | BW-Plug-in
EXCEPTION_ OCCURED_ LLPREQUEST_ RESPONE_SOCK |
A socket exception occurred. | Refer to the information in [{0}] to resolve the issue.
For example: Socket exception [port out of range:89833]. |
| TIBCO-BW-PALETTE-HL7-507003:
LLPRequestResponse : time out waiting for Response. |
errorRole | BW-Plug-in
ERROR_LLPREQUEST_RESPONE_ TIMEOUT_FOR_RESPONE |
The LLPRequestResponse activity timed out waiting for a response. | Set the LLPRequestResponse activity property "Request Timeout (msec)" to 0 ( no time out). |