Studio Preference Settings

< Previous		Next >

StreamBase Studio Panel

Option	Description	Default
StreamBase Installation Directory
Directory	Specifies the root directory where the current release of StreamBase is installed. This is where Studio looks for samples and other components at startup. If you modify this setting, restart Studio for the change to take effect. In general, do not change this setting, except under the direction of TIBCO Technical Support.	See Default Installation Directories
Automatic Perspective Switching
Switch to SB Authoring perspsective ...	A perspective is a collection of Eclipse views that are opened together to perform a set of related tasks. StreamBase Studio can be set to automatically switch between perspectives on certain triggering events. Studio automatically switches to the SB Test/Debug perspective when you launch one or more fragments, and stays in that perspective as you continue to launch fragments. By default, the setting for Switch to SB Authoring perspective when stopping the last fragment is enabled.	Enabled.
Auto-save Options
When running a resource with unsaved changes:	When you attempt to run a fragment, StreamBase Studio checks for unsaved files and resources in the current project, or referenced by the current project. At minimum, the primary EventFlow module must be saved before proceeding. This preference controls how and when resources are saved before running fragments. The options are: Save without prompting Automatically saves if unsaved resources are detected. The Save Resources dialog is never displayed. Prompt for save each time Displays the Save Resources dialog if unsaved resources are detected. Ask me next time This option has the following effect when you run a fragment: If the fragment has unsaved changes, the Enable Auto-save On Run dialog is displayed. This dialog lets you change your Auto-save preference to Save without prompting without reopening the Preferences window. If there are no unsaved changes, the fragment runs immediately. When either of the first two options is set, the Ask me next time option is no longer shown in the Preferences page. To make it visible again, click Restore Defaults, then close and reopen StreamBase Studio.	Ask me next time.
Advanced
Show deprecated Global Operators/Adapters	When disabled, Studio does not show deprecated operators or adapters in the Insert an Operator or Adapter dialog. When enabled, deprecated operators or adapters are displayed in that dialog. An operator or adapter is marked deprecated with the Java annotation `@Deprecated` in its primary Java source file. You can mark your custom operators or adapters deprecated as your project evolves and new components replace older ones. TIBCO StreamBase occasionally marks certain components as deprecated to encourage the use of newer components. If you are working on a legacy application and need to continue using a deprecated component, enable this setting. With this setting disabled, the display of EventFlow fragments that were saved with now-deprecated components is not affected. However, such fragments cannot pass typechecking and cannot be run in Studio, because the code that underlies the deprecated components was not loaded. You can continue to work on such fragments by enabling this option, or by upgrading the deprecated components with their replacements.	Enabled.
Use custom Component Exchange URL	When unspecified, the default behavior for the StreamBase Component Exchange dialog is to retrieve its list of available components from the TIBCO-provided Component Exchange. You can use this field to specify an alternate URL that contains an in-house or company-specific location for downloading StreamBase components. Contact TIBCO Technical Support for guidance in setting up an in-house component exchange site. Site-specific Component Exchange URLs can use the HTTPS protocol, in which case Studio prompts you for access credentials on the specified server. If you supply a URL that begins with HTTPS or FTP, Studio automatically prompts for credentials. If you supply a URL for another protocol, you can force authentication prompting for that protocol by setting the Java property `streambase.ide.component-exchange-force-auth` to `true` for the JVM that runs Studio.	Not specified.
Buttons
Restore Confirmation Messages button	Several StreamBase Studio confirmation dialogs include a check box labeled Do not show this again, which lets you suppress that confirmation dialog in the future. Click Restore Confirmation Messages to restore the original behavior for all confirmation dialogs.
Restore Defaults button	Restores all preferences settings to their as-installed defaults.

Authoring Panel

Use the StreamBase Studio → Authoring panel to set options for the SB Authoring perspective.

Option Description Default

EventFlow Editor

Automatically typecheck components

Specifies that components are automatically typechecked as you build your EventFlow fragment. Disable this preference to suppress automatic typechecking.

See also the related check box to enable Typecheck EventFlow Editors in background on the Typechecking panel, described below.

This preference has no effect on StreamSQL fragments, which are always typechecked automatically. See Typechecking for more on StreamBase typechecking.

Enabled

Skip deep typechecking of strict module references and extension points Enable to avoid full-depth typechecking of Extension Points and Module References that have all output schemas explicitly set. This can greatly speed up typechecking for some large fragments. Disabled

Show tooltips

Specifies that summary information about each component is to be shown when you hover the mouse pointer over an icon or arc on the canvas. For example:

Enabled

Automatically select newly inserted components Specifies that components newly placed on the EventFlow canvas are automatically selected. This automatically opens the new component's Properties view. Disabled

Automatically edit names of newly inserted components.

With this check box enabled (the default), when you drag a component icon to the EventFlow canvas (or use a keyboard shortcut to accomplish the same thing), the new component's name is selected with an edit cell open, ready for you to start typing to change the component's name. Press Enter to close the edit cell with your new name, or press Esc to use the default name or to exit the edit cell without saving your edits.

This feature adds an extra step to keyboard shortcuts that place new components on the canvas. For example, to add a Map operator, the keyboard shortcut is (at minimum) O M Enter with this option enabled, but is O M with this option disabled. You may prefer to disable this option temporarily when entering a long sequence of keyboard shortcuts to quickly fill a new canvas, then re-enable it. See Studio Keyboard Shortcuts.

Enabled

Use middle mouse button to scroll instead of pan This option refers to a mouse with three buttons, or with a scroll wheel that can be used as a middle button. With this option disabled, hold down the middle button or scroll wheel (without scrolling the wheel) to move the entire EventFlow drawing within the frame of the canvas window. With this option enabled, holding down the middle button or scroll wheel lets you scroll in four directions, exactly like using the canvas' scrollbars. Disabled

Save and restore view location and zoom factor When enabled, Studio preserves the current zoom level of EventFlow Editor sessions and the position of components relative to the top left corner of the EventFlow Editor canvas. These display features are saved when you save the EventFlow fragment, and are restored when you re-open the fragment. Enabled

Center canvas on selection during navigation

When enabled, auto-centers the canvas on components selected when navigating in two ways:

With the Back and Forward arrows in the Studio toolbar, or
In the Outline view, when the Follow Editor button is active

With this check box cleared, Studio highlights the selected component on the canvas, but does not center the canvas. If the component is offscreen when selected, Studio moves just enough of the canvas to make the component visible.

Enabled

Hide Control to toggle to/from text fields in Java Operator Properties

When cleared, the check box, radio button, and drop-down menu controls in Java operator and adapter Properties views display a T icon () to the right of their text labels. Clicking the icon or typing Alt+F2 (Option+F2 on Mac) replaces the check box, radio button, or drop-down menu with a text field, in which you can enter:

An expression, preceded by an equals sign (=), or
A module parameter name, in the form of ${param}.

When this preference is enabled, you can still convert a UI control to a text box with the keyboard shortcut when the control has focus. For additional details, see Parameterizing Java Operator and Adapter Properties.

Enabled

For new applications, store layout information in:

Controls how graphical layout and EventFlow semantic elements are stored in EventFlow source files. This setting takes effect only for newly created EventFlow fragments.

Application file: Layout and semantic information are stored together in the EventFlow module's source file (the .sbapp file).
Separate layout (.sblayout) file: Layout information is stored in a separate file with .sblayout extension. This is the default state.

StreamBase Studio respects the layout status it detects for each EventFlow fragment individually. That is, if Studio detects an .sblayout file with the same base name as the EventFlow file you are opening, it uses the layout information in the .sblayout file, and stores layout information there when saving the fragment. If Studio detects no .sblayout file, then it uses the layout information in the .sbapp file, and on save, stores layout information back to the .sbapp file. This Studio behavior is NOT changed by setting this preference.

This setting controls only whether .sblayout files are created automatically when you create and save new EventFlow fragment files, and does not affect existing .sbapp files in your workspace. For further details, see EventFlow Layout Options.

Separate layout (.sblayout) file

Outline View

Show empty categories (EventFlow Editor) Displays container folders in the Outline view for every component type, even if the fragment contains no instances of some components. By default, the Outline view only contains view categories for existing components. Disabled

Palette View

Show separate entries for Input, Output Adapters and Java Operators

The Palette view by default contains a single icon labeled Adapters, Java Operators that you drag to the canvas. Once there, a dialog opens that lets you select one or more adapters or global Java operators for placement on the canvas.

In previous releases, this single Palette view icon was shown as four separate icons: Input Adapter, Output Adapter, .NET Operator, and Java Operator. Select this check box to restore those four separate icons to the Palette view.

Disabled

For further information about using these options, see the EventFlow Editor topic.

Authoring — EventFlow Rendering Panel

Use the StreamBase Studio → Authoring → EventFlow Rendering panel to set options for the EventFlow Editor.

Use the general Eclipse Preferences panel General → Appearance → Colors and Fonts to specify color and font settings for all aspects of Studio. Look in that panel to set the background color for Groups, which was specified on this EventFlow Rendering panel in previous releases.

Option Description Default

Render tiles around component icons

Enable this option (default) to show tiles around component icons, whose left and right edges are where ports attach. Disable to remove the tiles. The selection outline still appears with or without tiles.

Enabled

Render selection without filled outline

When disabled (default) the selection outline is filled with light blue as shown above. When enabled, the selection outline shows as an unfilled dotted line, as follows:

Disabled

Show mouse hover feedback

When enabled (default), shows a yellow information box for a component when hovering the mouse over it.

Enabled

Use animations When enabled (default), shows an animation effect when you use the Rearrange components and arcs function ( button or Ctrl+L). Enabled

Use simple colors instead of gradients When enabled, tiles and selection outlines are shown with flat colors. When disabled (default), colors are shown as gradients. Disabled

Hide adapter tiles when there is only one port When enabled (default), adapters that have only one input port or only one output port are shown without an enclosing tile. When disabled, tiles are always shown for adapters. Enabled

Show indicator for components that run in a separate thread

When enabled (default), if a component has the Run this component in a parallel region option selected in its Properties view, the component is shown with a circle inside the bounds of the icon.

When disabled, the circle decoration is not shown, and there is no visual indicator of the component's separate thread state.

Enabled

Use slanted arcs during arc routing and auto-layout When enabled (default), arcs placed by the Layout Application (Ctrl+L) and Reroute Arcs (Ctrl+Alt+L) functions are shown with an angled slant between components. When disabled, arcs are only placed horizontally or vertically, with right angles for every direction change. Enabled

Ignore label widths during auto-layout When disabled (default), EventFlow modules are laid out during auto-layout or arc routing by taking the widths of the names of each component into account. When enabled, text widths are ignored. Disabled

Display additional label above components

Specifies the amount and type of information to display in blue lettering above certain components on the EventFlow canvas. Specify one of the following:

Module Reference/Class Name: Show labels only of module references, embedded operators, and adapters. (For custom operators and adapters, the name shown is the one set with the setShortDisplayName() method.)
Component Type: Show the type of each component (not including input and output streams).
Nothing: Show no labels.

Module Reference/Class Name

Abbreviate module reference labels and class names When enabled (default), labels shown above module references show an abbreviated package name that emphasizes the last name in the fully-qualified package name. When disabled, the fully qualified package name is shown. Enabled

Desired character length for abbreviations Designates the width in number of characters for the abbreviated package name, when package name abbreviations are selected as in the row above. 32

Theme

Selects the style of EventFlow Editor canvas icons. The options are:

Flat: (Default). Icons are shown using the Windows 10 flat style without shading.
Classic: Icons are shown as in earlier releases of StreamBase, using a 3D style of icons common in Windows 7.

Cluster Panel

Use the StreamBase Studio → Cluster panel to set the default names for clusters and nodes launched by Studio. These settings are saved as part of the current Studio workspace's metadata, and must be re-specified if you change workspaces.

Cluster name

Specifies the default cluster name used by Studio when launching fragments and applications in Studio. The cluster name is the second part of a node.cluster service name. The default value is the current user's system login name.

This selection does not affect applications run at the command prompt with the epadmin command, where the node.cluster name is specified as part of the command.

Default Node Names

Specify the naming pattern for node names assigned by Studio when launching EventFlow, LiveView, and Java fragments into nodes; when launching a StreamBase Application in Studio; and when running a StreamBase Unit Test fragment. These settings only affect nodes launched in Studio, and not nodes launched on the command line. Node name assignments made in Studio are not saved as part of the fragment archive, and are not transitive into a StreamBase Application that incorporates these fragments.

The name patterns are composed of variables that represent information taken from the Studio project. Remember that you can install and start multiple nodes in Studio, including multiple instances of the same EventFlow or LiveView fragment. The default name patterns are designed to create a set of node names that are unique across the Studio workspace.

You can specify a simple string for your node naming pattern, or use any of the variables from the Variables button to build a pattern from parts. The SeqNum token is required so that unique node names are guaranteed.

EventFlow Fragments: The default node name is composed from the current EventFlow project's name, an underscore, the short name of the EventFlow module being launched (that is, not the fully qualified path name), and an automatically incremented sequence number.
LiveView Fragments: The default node name for LiveView fragments is the LiveView project's name followed by an automatically incremented sequence number. (Remember that you install and run Live Datamart servers from the LiveView project as a whole, not from a single file in that project.)
Java Fragments: The default node name for launches of Java fragments is the fragment's project name, an underscore, the unqualified primary class being run, and an automatically incremented sequence number.
Unit Test Fragments: The default node name for launches of EventFlow Unit Test fragments is the project name, an underscore, the unqualified primary test class being run, and an automatically incremented sequence number.
Application Archive: The default node name for launches of StreamBase Application archive files is the containing project name followed by an automatically incremented project number. This is the same naming pattern as for LiveView fragments, which are also installed and run from a StreamBase Application project as a whole. You can launch one StreamBase Application archive at a time per cluster.

Compiler Cache Panel

Studio maintains a cache of compiled build artifacts when you run a module in Studio, and uses cached items when re-launching the same module. The cache is automatically maintained such that any portions of a fragment are rebuilt if the underlying EventFlow code changed, but unchanged portions are read from the cache.

You can control the location of the compiler cache and its persistence with three options:

Use a temporary directory for each Studio session: This is the default setting. The cache is written to a directory created in the system temporary directory determined as described for the TMP environment variable.
Use a workspace specific directory, and persist cache across sessions: The cache is written to a directory in the .metadata folder of your Studio workspace.
Persist cache at a specific directory: Use the Browse button to navigate to your preferred location.

When you click Apply, the full path to the selected cache directory is shown in the Current Location field.

Use the Clear Cache Now button to force all components to be rebuilt at the next launch.

You can specify the location of the compiler cache for use by the StreamBase Runtime by setting the streambase.codegen.cachedir system property.

Decision Table Panel

Use the StreamBase Studio → Decision Table panel to set initial state options for the Decision Table operator.

Option	Description	Default
Show column alias if present	Displays aliases if present from an imported decision table or aliases manually entered in the Decision Table Editor.	Disabled
Automatically resize columns to fit content	Resizes columns to fit content.	Enabled
Automatically resize rows to fit content	Resizes rows to fit content.	Enabled
Automatically merge rows	Merges rows of similar content.	Disabled
Show expanded text	Displays full row syntax or expressions.	Disabled
Show domain descriptions if present	Displays domain descriptions if present. Currently not supported.	Disabled
Show column filter	Displays filter when present.	Enabled
Export column alias	Exports column aliases, for use by another Decision Table operator.	Disabled
Show condition area string	Displays condition area string when present.	Enabled
Rule ID Management
Use existing IDs when importing	Use existing rule IDs from imported decision table.	Enabled
Reuse highest deleted rule IDs	For this selection, if 5 (for example) is the last rule and it is deleted, the next rule added will have an ID of 5 (that is, the deleted ID is re-used).	Enabled
Always assign rule IDs based on their order in the editor	Renumbers each time a new rule is added, moved, or deleted. If a rule is inserted before rule 5, for example, then the inserted rule will be given an ID of 5, and the current rule 5 is renumbered to rule 6.	Disabled
Always maintain existing rule UIDs when inserting or reordering rules	Rules are never renumbered.	Enabled

Decision Table — Analyzer Panel

Use the StreamBase Studio → Decision Table → Analyzer panel to set initial state options for the Table Analyzer.

Option	Description	Default
Highlight partial ranges	Highlights rows whose condition falls completely or partially within the specified condition range.	Disabled
Use Domain Model for Table Completeness	The Table Analyzer takes into consideration the optional domain model when analyzing the decision table to report any uncovered domain entries.	Disabled
Show Analyzer Contents while opening table	Displays Table Analyzer contents when the decision table is open. However, you must click the Analyze button to invoke the analysis.	Enabled

Decision Table — Appearance Panel

Use the StreamBase Studio → Decision Table → Appearance panel to set appearance options for the Decision Table Editor.

Use these default color sets or customize as needed.

Alternate row colors in editor: Alternates decision table row colors. Enabled by default.
Use color gradients in headers: Alters the decision table header color with a subtle light-to-dark change. Disabled by default.
Built in Palettes: Select a color palette from the drop-down list. The number of colors displayed varies by palette. Select a field in the Colors group to view that field's color in the Text color button. The default palette is Standard.
Colors: Click Text color to customize the palette selected above by field chosen in the Colors group.
Font: Click Change to select the desired font for the column headers, condition data, or action data. A font menu appears based on category selected.

Launching Panel

Use the StreamBase Studio → Launching panel to set options for running StreamBase fragments and applications in Studio. Changes made in this panel do not affect any currently running fragments or applications.

Option	Description	Default
Launch Options
Open editor for running StreamBase Fragment when launched	When launched, the EventFlow Editor opens in the SB Test/Debug perspective for the EventFlow module selected to be run.	Enabled
By default, include operating system environment variables in fragment launches	By default, the system environment is not included by Studio when launching fragments into nodes, which prevents you from assuming that your development environment will be available at deployment time on another machine. Enable this control to allow the development system environment to be included in fragment launches by default.	Disabled
Fragment and Application Output
Fragment and Application Output	Configures the degree of information displayed in the Console view when fragments or applications are run. Options are: Verbose For each message line, verbose format shows: The message type (`status`, `complete`, `error`, and so on) In parentheses, the command and command target of an underlying epadmin or deployment mechanism command. The source of the Logback message that follows, which is typically the `nodename`.`clustername` of the emitting node. For LiveView launches, A hyphen. The message text, typically formatted by the `logback.xml` file for the fragment or application project. Console views before StreamBase 10.3.0 showed message lines in verbose format. Concise The concise format shows for each line: In parentheses, the command and command target of an underlying epadmin or deployment mechanism command. The message text, typically formatted by the `logback.xml` file for the fragment or application project. Minimal The minimal format shows: On a line of its own in parentheses, each underlying command and command target run, as described for the Verbose format. Lines of Logback formatted messages, typically grouped by `(command target`) lines.	Concise

Test/Debug Panel

Use the StreamBase Studio → Test/Debug panel to set options for the SB Test/Debug perspective.

Option	Description	Default
Input Streams/Output Views
Input View tuple buffer size	When you run a fragment and enqueue data, the number of input tuples can become quite large. It can be helpful to limit the number of tuples in the Input Streams view's display buffer. When the limit is reached, newer tuples are kept in the view while older tuples are allowed to scroll off the view. The specified display buffer size applies to the total number of tuples in the Input Streams view, from the total of all input streams.	400 tuples
Output View tuple buffers size	Same as above, but for output tuples in the Output Streams view. The specified display buffer size applies to the display of each output stream, as well as when (All Output Streams) is selected.	400 tuples
Output View highlight color	Specifies the color applied to matching rows in the Output Streams view when you have specified a filter in the Output Streams Filter dialog, and have specified the highlight selected option in the Results section of that dialog.	#FFFF00, a solid yellow
EventFlow Debugger
Default debug port	Specifies the port used by the EventFlow Debugger for Debug launches.	8000
Bring Variables view to front when a StreamBase breakpoint is hit	By default, the Variables view shares the lower-left quadrant of the SB Test/Debug perspective with the Output Streams, Input Streams, and Profiler views. When this option is selected, the Variables view is brought to the front when the EventFlow Debugger hits a breakpoint. You can also toggle the StreamBase button in the Variables view's toolbar to specify the same preference.	Enabled
Field Value Formatting Options
Indicate nulls using	The null token is used in editors and views when a field contains no value. You can substitute any string to indicate nulls.	"null"
Display blobs as	In the Input Streams and Output Streams views, and elsewhere in Studio, show the first few characters of blob fields as hexadecimal values or ASCII characters.	Hex
Maximum blob characters to display	Specifies the number of bytes of blob fields to display as character data in the Output Streams view.	16

Typechecking Panel

Use the StreamBase Studio → Typechecking panel to enable or disable categories of typecheck warnings from appearing as decoration markers on the EventFlow Editor canvas, in the Project Explorer view, and as warning messages in the Properties view. You can set any typecheck warning category as Warning or Ignore. By default, all categories are set as Warning.

Use the Restore Defaults button to return all typecheck warnings to their default enabled state.

The settings on this panel affect the Studio workspace as a whole. You can also specify typecheck warning preferences for Studio projects and for individual EventFlow modules:

To change typecheck warning settings for an individual EventFlow module, select the EventFlow Editor's Typecheck Options tab for that module.
To change warning settings for a project, right-click the project's name in the Project Explorer view and select Properties from the context menu. In the resulting dialog, select StreamBase → Project Builder.

In all three locations, the typecheck warnings have the meanings described in the table on the EventFlow Editor Typecheck Options Tab page. See Typecheck Warnings for an overview of where the warning text and warning icons appear.

The Typechecking panel in Preferences also has a check box for one Builder feature:

Builder
Enable module signature change analysis during builds	Select this check box to have Studio store a hash of the signature for all modules and all intermediate stream schemas in the metadata of each module file. This allows Studio to build dependent modules only when the hash value changes, for a speedup when building large complex fragments.	Enabled

Setting Preferences

Use the buttons on the Preferences page as follows:

Click Apply to preserve your changes for the current page. If you set preferences on two pages, click Apply on the first page before moving on to the next page.
Click Restore Defaults to restore the state of a page's settings as installed.
Click Apply and Close to preserve changes for the current page and exit the Preferences dialog. Changes that require you to restart StreamBase Studio for the setting to take effect are noted in the tables above. Otherwise, changes take effect immediately, but do not affect any currently running fragments or applications.