Surface Specifications

Click the Close button to close this dialog box.

Use the options in the Surface style group to attach different colors to the levels (heights in the vertical dimension) of the surface, or plot the entire surface in a single color.

Select the Shaded option button to attach different colors to the levels of the surface; select the Solid option button to draw the surface in a single (solid) color.

If the Top style - Solid option button is selected, you can select the color to be used for the drawing of the (solid, single-color) surface. Like practically all options of Statistica graphics, the respective selections can be saved as a style or default style for future use, or can be retrieved from an existing style.

The options in the Surface/contour lines group are used to select/deselect lines for the "wire-frame" that is drawn to represent the surface. You can turn on or off the lines in the two horizontal dimensions, and, if turned on, select the patterns, sizes, colors, etc. of the lines to be used (see also Line Properties).

The surface is constructed as a "wire-frame" or fishnet, made up of small squares formed by lines in two horizontal dimensions; you can select the Line Properties of those lines via the X and Y axis buttons. In addition, contour lines are drawn "around" the surface to mark identical levels or heights in the vertical dimension; change the Line Properties of those lines via the Level button.

The options in the Surface colors group provide full control of the specific colors that are used for surfaces and projected contours to mark different levels or heights in the vertical dimension.

Select the Number of defining colors from this drop-down box.

Select this check box to force the program to use the exact color selections for the surface as specified in this dialog box. By default, when this check box is not selected, the selected colors will be "interpolated" between levels to create (as much as possible) smooth transitions between colors (i.e., "shades" to indicate intermediate levels of the surface).

Specify the colors to be used for surfaces and projected contours for each of the available Defining colors fields. Note that each color can be saved to a style, default style, or retrieved from an existing style; see Graph styles for additional details.

The options in the Contour lines group are used to specify the Line Properties for the contour lines.

Select Automatic (the same colors as for surface) from the Lines drop-down box to specify that the lines used in contour projections use the same colors as the corresponding Surface colors for the same levels in the vertical dimension. To define different colors, select Custom defined.

Click the Width button to display the Contour Lines Width dialog box, where you can set the line width for all contour lines.

These options are available only when Custom defined is selected in the Lines option (see above). Click the Pattern buttons to display the Line Properties dialog box, where you can specify pattern and color options for the different contour lines.

Select this check box to include the full range of Z-axis values when defining contours/levels. When this check box is selected, the legend and surface colors are created as if the range of data were the entire range of the Z-axis. By selecting this option, you will be able to compare the data from several surfaces or contours even if one surface has a smaller spread of data range than the others. When this check box is cleared, the legend and surface colors will be created based on the real (fit) data range, i.e., Statistica will use different colors for the data range for different surfaces. Note that other aspects of the legend for surface and contour plots can be controlled using options in the Graph: Surface tab of the Graph Options dialog box. See, for example, the Legend (surface/contour) option, which is used to specify the detail of the levels (surface colors) used in surface and contour plot legends.

Select Heavy or Light from the Highlight contour line drop-down list to highlight the contour line indicated in the Line number list using a heavy (thick) or light (thin) contour line. Select Off if you do not want to highlight the contour line at all. Note that the Level check box must also be selected under Surface/contour lines (i.e., contour lines must be drawn on the graph).

Select the contour line number that will be highlighted in the manner indicated by the selection in the Highlight contour line drop-down list. To highlight the middle line of the plot, select Middle. Note that the Level check box must also be selected under Surface/contour lines (i.e., contour lines must be drawn on the graph).

Style. From this drop-down list, select a style for the surface plot. Included are Black and White styles for those with color vision deficiencies. New styles can be created by specifying different colors via the Defining colors options, and then click the button adjacent to the Style drop-down list to save the style.

Click the General surface options button to display the Surface dialog box, where you can further refine various surface options. These options can also be selected in the Surface tab of the Graph Options dialog box.

Click this button to display the Vertical axis dialog box. These options can also be set via the Axis - Major Units tab.