Developing StreamBase Java Operators

The wizard's second page is labeled Java Operator. Use the second page of the wizard to specify features you want generated as Java code, and to specify properties that can be configured in the generated operator at runtime.

An operator property is a Java property for this operator. For each property you specify, the wizard generates stub code that places a control in the Operator Properties tab of the Properties view for your operator. After you add implementation code to the generated stub code, the end-user of your operator can use these controls to modify the operation of your operator. See Java Operator Properties for additional details.

Edit the following fields in the wizard's Java Operator page:

public class Example extends Operator implements Parameterizable {
    private int         startCount = 1;
    private boolean     clever = true;
    private String []   stockSymbols;
    private String      name;

    public void setStartCount(int i) {startCount = i;}
    public int getStartCount() {return startCount;}
    public void setClever(boolean b) {clever = b;}
    public boolean isClever() {return clever;}
    public void setStockSymbols(String [] ss) {stockSymbols = ss;}
    public String [] getStockSymbols() {return stockSymbols;}
    public void setName(String s) {name=s;}
    public String getName() {return name;}
    public void typecheck() throws TypecheckException {}
    public void processTuple(int inputPort, Tuple t) throws StreamBaseException {
    }
}

StreamBase currently supports the following property types:

The only way to create an Enum property is to declare it as a String property in the Java Operator class and define the enumeration values in a BeanInfo class, as in the example below.

All but the last two are simple property types that StreamBase derives automatically by looking at the signatures of the getter/setter methods in the Parameterizable class. These can be specified in the BeanInfo class with SBPropertyDescriptor objects, as in the example above.

Enum properties are string properties that can only take on a specified set of values. ResourceFile properties are similar to Enum properties, but their value must be the name of a resource. In StreamBase Studio, this is enforced by displaying a drop-down list of files available from your project's folder.

Because both Enum and ResourceFile properties are implemented as Strings, their getter and setter methods must return and expect objects of type String, respectively. Thus, these property types cannot be automatically derived by StreamBase. To use these properties, an adapter must have an accompanying BeanInfo class that returns the SBPropertyDescriptor subclasses EnumPropertyDescriptor or ResourceFilePropertyDescriptor in its list of PropertyDescriptors.

The BeanInfo class is described in the java.beans.BeanInfo API documentation. It can be used by the Parameterizable object to control what properties are exposed; add additional metadata about properties, such as which properties are optional; and access special types of properties that can't be automatically derived via reflection. If a BeanInfo class is present, only the properties explicitly declared in this class will be exposed by StreamBase.

The easiest way to make a BeanInfo class is to create a class that you name by appending BeanInfo to the Parameterizable class name. Thus if the Parameterizable class is called OpParams, the corresponding BeanInfo would be OpParamsBeanInfo (in the same package as OpParams) and extending java.beans.SimpleBeanInfo.

The following example BeanInfo class changes the Name property to an enum and makes the Clever property optional:

public class ExampleBeanInfo extends SimpleBeanInfo {
  public PropertyDescriptor [] getPropertyDescriptors() {
    try {
      SBPropertyDescriptor [] p = {
        new SBPropertyDescriptor("StartCount", Example.class),
        new SBPropertyDescriptor("Clever", Example.class).optional(),
        new EnumPropertyDescriptor("Name", Example.class,
                                     new String [] {
                                     "Tom", "Dick", "Harry"
                                     })
        };

        return p;
    }
    catch(Exception e) {
      System.out.println("Exception: " + e);
        e.printStackTrace();
      }
    return null;
  }
}

Note that the optional() method shown in this example simply marks the descriptor as optional.

Java Operators can also change their number of input and output ports. If this is done by setting property values, the property's setter method should call setPortHints with the new number of ports. Output ports are automatically configured by calling setOutputSchema. Operators may ensure the correct number of input ports in their typecheck method by calling the requireInputPortCount method.

Be sure to see the Special Studio Considerations section of the Javadoc for the Operator class in the StreamBase Java Client Library.

For example:

/**
 * This operator has two integer parameters, many input and many output ports
 */
public class RoundRobinOperator extends Operator implements Parameterizable {
    private int         _numOutputPorts = 1;
    private int         _nextOutputPort = 0;
    private int         _numInputPorts = 1;

    public RoundRobinOperator() {
        setPortHints(_numInputPorts, _numOutputPorts);
    }

    public int getInputPortNumber() {return _numInputPorts;}

    public void setInputPortNumber(int i) {
        _numInputPorts = i;
        setPortHints(_numInputPorts, _numOutputPorts);
    }

    public int getOutputPortNumber() {return _numOutputPorts;}

    public void setOutputPortNumber(int i) {
        _numOutputPorts = i;
        setPortHints(_numInputPorts, _numOutputPorts);
    }

    public void init() throws StreamBaseException {
        System.out.println("RoundRobinOperator.init");
    }

    public PortCounts getPortCounts() {
        return new PortCounts(_numInputPorts,1);
    } 

    public void typecheck() throws TypecheckException {
        System.out.println("RoundRobinOperator.typecheck");
        Schema s = null;
        StringBuffer errorMessage = new StringBuffer();

        if(getInputPortCount() <= 0) {
            throw new TypecheckException("Invalid Number of Input Ports: " 
                                         + getInputPortCount() 
                                         + " must have at least 1");
        }

        System.out.println("RoundRobinOperator.typecheck: requiring inputs: " + _numInputPorts);
        requireInputPortCount(_numInputPorts);

        for(int i = 0; i < getInputPortCount(); ++i) {
            Schema inputSchema = getInputSchema(i);

            if(s == null) {
                s = inputSchema;
            } else if(!s.sameFieldTypes(inputSchema)) {
                errorMessage.append("Invalid schema on port " + i + "\n");
            }
        }

        if(errorMessage.length() > 0)
            throw new TypecheckException(errorMessage.toString());

        System.out.println("RoundRobinOperator.typecheck: input schemas ok");

        System.out.println("input port num " + getInputPortNumber()
                           + " output port num " + getOutputPortNumber());

        s = getInputSchema(0);

        for(int i=0; i < getOutputPortNumber(); ++i) {
            setOutputSchema(i, s);
        }

        System.out.println("RoundRobinOperator.typecheck: done");
    }

    public void processTuple(int inputPort, Tuple t) throws StreamBaseException {
        sendOutput(_nextOutputPort, t);
        _nextOutputPort = (_nextOutputPort + 1) % _numOutputPorts;
    }
}

As mentioned in Methods for Studio Presentation, when typechecking fails, your custom operator or adapter should throw Operator.PropertyTypecheckException instead of TypecheckException to allow Studio to decorate your operator icon with an overlay to indicate its warning or error state.

More importantly, because typechecking is performed so frequently, it should be efficient. Each typecheck method you create should:

That means your typecheck methods should not:

That is, the only side effect typechecking should have is to throw an exception. Use init() to open files and connect to databases. However, do not perform typechecking from an init() method, as it is executed by the server, and not within StreamBase Studio.

Java operators start, pause, resume and shutdown along with the StreamBase application that contains them. It is also possible to suspend and resume Java operators independently of their StreamBase application.

This is accomplished with the same commands that are used to suspend and resume a StreamBase application as a whole. The command sbadmin suspend can be used to suspend an application; similarly, sbadmin resume is used to resume a StreamBase application.

To suspend or resume individual operators, you can append a list of Java operators to the sbadmin suspend or sbadmin resume command. If one or more strings are appended to sbadmin suspend, then the StreamBase application as a whole will not be suspended, rather the individual Java operators named by the appended strings will be suspended.

Note that an individual Java operator can be suspended or resumed only if the StreamBase application itself is running. An individual Java operator can be running only if the application that contains it is also running. Therefore, it is not meaningful to suspend or resume an operator that is not currently running if the application that contains it is not running.

The sbc status command returns status information about the StreamBase Server.

The sbc status --operators command returns the status of any Java operators contained by the server's application. Note that sbc status --operators and sbc status are disjoint commands: sbc status returns information about the server only, not about Java operators contained in the server. Similarly, sbc status --operators returns information about contained Java operators only, and not any information about the server itself.

In this context, the status of a Java operator consists only of its current state. For example, if a Java operator has been started and is currently running, its state will be STARTED. If a Java operator has yet to be started, its state will be NONE. If a Java operator has been suspended, its state will be either SUSPENDED_AND_DROPPING_TUPLES or SUSPENDED_AND_PROCESSING_TUPLES. Lastly, if an operator has been shut down its state will be SHUTDOWN.

By default, a Java operator starts along with the StreamBase application that contains it. In Studio, in the General tab for Java operators, there is a check box labeled Start with application. By default, this box is selected, meaning that the Java operator will start with the application. Clearing this check box causes the operator to be left in the NONE state when the application starts.

A Java operator that does not start with its application will stay in the NONE state until it is explicitly started with the sbadmin resume operatorName command. Such an operator will not start even if the application as a whole is resumed. So for example, the application as a whole may suspend and then resume; this will have no effect on an operator that has not started with its application.

If a Java operator is suspended separately from the application that contains it, tuples might still arrive at the suspended operator. You can configure the Java operator to handle these tuples in two different ways:

These two possibilities are represented by static Strings on the class com.streambase.sb.operator.Operator, SUSPENDED_AND_DROPPING_TUPLES and SUSPENDED_AND_PROCESSING_TUPLES, respectively. A Java operator is configured to either drop or process tuples by calling the method setSuspendBehavior on its instance. setSuspendBehavior takes an int argument, the value of which must be either SUSPENDED_AND_DROPPING_TUPLES or SUSPENDED_AND_PROCESSING_TUPLES.

In an editor, we started by adding these import statements in StringCase.java:

import com.streambase.sb.DataType;
import com.streambase.sb.Schema;
import com.streambase.sb.StreamBaseException;
import com.streambase.sb.Tuple;
import com.streambase.sb.operator.Operator;
import com.streambase.sb.operator.Parameterizable;
import com.streambase.sb.operator.TypecheckException;

import java.util.Arrays;

Next, we declared the class by extending the StreamBase Operator class. For example:

public class StringCase extends Operator implements Parameterizable {

In the constructor, we defined two constants for an enum property, conversionType. In this example, we defined the metadata for the enum property in a Java bean, the StringCaseBeanInfo class. For example:

//
// Constants for enum property conversionType
//
public static String UPPER = "Uppercase";
public static String LOWER = "Lowercase";

/** Enum property, metadata defined in StringCaseBeanInfo.java */
private String conversionType = LOWER;

Next we declare the Java Operator's input and output, and an array for fields in the schema. For example:

private Schema inSchema;        // input to this operator
private Schema outSchema;       // output from this schema
private Schema.Field[] fields;  // individual fields in the schema

Then we use the setPortHints method to specify a fixed number of input and output ports:

public StringCase() {
    // this operator has one input and one output
    setPortHints(1, 1);
}

Next, we set up the typecheck method for the class, added exception handling, and declared that the schema of the output is the same as for the input:

public void typecheck() throws TypecheckException {

    // require exactly one input port
    requireInputPortCount(1);

    // the input must contain at least one string field
    inSchema = getInputSchema(0);
    fields = inSchema.getFields();
    int stringCount = 0;
    for(int i=0; i < fields.length; ++i) {
        DataType dt = fields[i].getDataType();
        if(DataType.STRING.equals(dt)) {
            ++stringCount;
        }
    }
    if (stringCount==0)
        throw new TypecheckException(
                   "At least one string field is required");
     // the output schema is the same as the input
    setOutputSchema(0, inSchema);
    outSchema = inSchema;
}

Finally we defined the work that the custom Java operator will perform, by using the processTuple method. For example:

public void processTuple(int inputPort, Tuple t)
    throws StreamBaseException {
    Tuple out = outSchema.createTuple();

    for(int i=0; i < fields.length; ++i) {
        Schema.Field f = fields[i];
        DataType dt = f.getDataType();
        String fname = f.getName();

        if(DataType.STRING.equals(dt)) {
            String str = t.getString(f);
            if(LOWER.equals(conversionType)) {
                out.setString(fields[i], str.toLowerCase());
            } else if(UPPER.equals(conversionType)) {
                out.setString(fields[i], str.toUpperCase());
            }
        } else {
            out.setField(fields[i], t.getField(fields[i]));
        }
    }
    sendOutput(0, out);
}

public String getConversionType() {return conversionType;}

public void setConversionType(String s) {
    conversionType = s;
    }
}

StringCaseBeanInfo.java is the BeanInfo class for the StringCase operator. StringCaseBeanInfo defines the metadata for the properties that will appear in the StreamBase Studio Properties view for this Java operator. The StringCase operator has only one property, conversionType, which is an enum whose values are defined in the StringCase class.

Now, open StringCaseBeanInfo.java and examine it. First we import these classes:

import java.beans.PropertyDescriptor;
import java.beans.SimpleBeanInfo;

import com.streambase.sb.operator.parameter.EnumPropertyDescriptor;
import com.streambase.sb.operator.parameter.SBPropertyDescriptor;

And define the bean as follows:

public class StringCaseBeanInfo extends SimpleBeanInfo {
  public PropertyDescriptor [] getPropertyDescriptors() {
    try {
      SBPropertyDescriptor [] p = {
        new EnumPropertyDescriptor("ConversionType", StringCase.class,
                     new String [] {
                     StringCase.UPPER, StringCase.LOWER
                     })
        };

        return p;
    }
    catch(Exception e) {
        System.out.println("Exception: " + e);
        e.printStackTrace();
    }

    return null; // should never happen
  }
}