StreamBase JMS Adapter Configuration

Overview

This article provides a reference for generating a StreamBase configuration file for JMS and TIBCO EMS adapters, where the HOCON type is com.tibco.ep.streambase.configuration.adapter and the root object is JMSAdapter. Use this page for reference for configuring the server connection and destination specifications for one or more JMS or TIBCO EMS message servers.

Configuration files of this type can be edited as usual with the StreamBase Configuration File Editor. However, StreamBase Studio also provides a specialized JMS Configuration Editor dedicated to configuring this JMS and EMS configurations, which provides a forms-based way to edit the HOCON properties described in this article. The JMS Editor is invoked from the Edit button of the Properties view of any JMS or EMS operator. See JMS and TIBCO EMS Configuration Editor for further details.

Because you will use the JMS Configuration Editor for most of your JMS and TIBCO EMS configuration work, this page serves as a reference for fields in the JMS Editor. Directly editing your JMSAdapter HOCON file is possible, but should be very rare.

Prior to StreamBase 10.3.0, JMS and EMS adapters were specified with a configuration file named adapter-configurations.xml which had to be resident in the Studio project's src/main/resources folder. While this XML file format is still supported, TIBCO recommends using a HOCON configuration file instead.

Note

If a JMS adapter HOCON configuration file is included in your project in src/main/configuration, Studio ignores any adapter-configurations.xml file that may still be present in the same project.

For more information on the TIBCO StreamBase® Adapter for JMS, see JMS Adapter.

Each configuration file must contain the following:

name

Specifies an arbitrary, case-sensitive string to name this configuration, which must be unique among other files with the same type, if any. Configuration files can refer to each other by this name. Select a name that reminds you of this configuration's type and purpose. For example:

name = "JMSAdapter"
version

Specifies an arbitrary version number that you can use to keep track of file versions for this configuration type in your development project. The maintenance of version numbers is under user control; StreamBase does not compare versions when loading configuration files during the fragment launch process. The version number is a string value, and can contain any combination of characters and numbers. For example:

version = "1.0.0"
type

This essential setting specifies the unique HOCON configuration type described on this page.

type = "com.tibco.ep.streambase.configuration.adapter"
configuration

This essential setting specifies the unique HOCON configuration type described on this page.

Root Object

There is one root object in configuration files with type com.tibco.ep.streambase.configuration.adapter that affects these particular operators:

  • JMSAdapter

Note

The type com.tibco.ep.streambase.configuration.adapter also contains an additional root object, AdapterGroup. For more information see StreamBase AdapterGroup Configuration.

Structure of the File

The JMS and TIBCO EMS configuration schema is complex and multi-layered. However, remember that you will configure your JMS connections using the JMS Configuration Editor and will rarely need to edit a configuration file directly.

The exception is setting default entries with properties whose name begins with default. Those must be edited with the text mode HOCON Editor.

In outline view, a JMS configuration file takes the following form:

name = "JMSAdapter"
version = "1.0.0"
type = "com.tibco.ep.streambase.configuration.adapter"
configuration = {
  JMSAdapter = {
    jmsServers = {
      YourServerName = {
        [properties for YourServerName] 
        destinations = {
          dest1 = {
            [properties for dest1 on YourServerName] 
          }
          dest2 = {
            [properties for dest2 on YourServerName]
          }
          ... [possibly more destinations defined]
        }
        defaultDestination = {
          [default properties for destinations on YourServerName]
        }
        [further properties for YourServerName. The JMS Editor usually
        alphabetizes object and property names. Thus, many server 
        properties might be found after the "destinations" objects.]
      }
      AnotherServerName = {
        [properties, objects, and destinations for this second server]
      }
      FurtherServers = {...} ...
    }
    [The next four objects each define a set of named features
    that can be referenced elsewhere in the configuration. Of these
    four, only timeStampFormats is recommended for current use, and
    is the only one supported by the JMS Editor. Instead of the three
    map settings here, current best practice is to follow your EMS
    or JMS component on the canvas with a Map operator that performs 
    the desired mapping there.]
    fieldMaps = { ...
    }
    jmsHeaderFieldMaps = { ...
    }
    jmsPropertyMaps = { ...
    }
    timeStampFormats = { ...
    }
    [The properties whose names begin with "default" specify default
    settings. Default properties are not supported by the JMS Editor
    and can only be specified by editing the jmsAdapter.conf file 
    in text mode with the StreamBase HOCON Configuration Editor.
    The defaults at this level, parallel to the jmsServers object,
    apply to all destinations defined in this configuration file.]
    jmsServerDefaults = {
      [In this object, specify defaults that are to apply to all
      servers defined in this configuration file.]
      ...
      }
    defaultTimeStampFormat = "tsFormat2"
    ...
    [Defaults at this level (parallel to the jmsServers object above)
    apply throughout this configuration file, to destinations as
    well as servers.]
  }
}

Objects and Properties

This section shows the subordinate objects, properties, usage, and syntax for the JMSAdapter root object. Throughout, the terms JMS and TIBCO EMS apply interchangeably to each other's services. In general, we use JMS for its brevity, but show sample configuration lines for a TIBCO EMS server.

JMSAdapter

Required root object for a StreamBase JMS adapter configuration.

associatedWithEngines

If you want to restrict this object to be associated with specific engines, do so here. Each array value can be a specific engine name or a regular expression that applies to more than one engine. This array is optional and has no default value. If not present, the configuration is associated with all engines. This is a property of the JMSAdapter root object, and thereby applies to all JMS or EMS connections configured in the same file.

For example:

associatedWithEngines = [ "javaengine", "otherengine[0-9]" ]
adapterClassName

Fully qualified class name of the adapter. This property is optional and has no default value.

For example:

adapterClassName = "com.streambase.sb.adapter.jms.enqueue.JMSReader"
jmsServers

A top-level object that groups together one or more JMS or EMS server configurations used by this adapter to subscribe to messages from those message buses. This object is required and must contain at least one server configuration.

For example:

jmsServers = {
  YourServerName = {
...
YourServerName

String. A user-assigned name for a single TIBCO EMS or JMS server. The name you assign for this object:

shows up in the drop-down list in the Properties view for any of the JMS or EMS operators:

description

Description of this JMS server. This property is optional and has no default value. For example:

description = "EMS server in the QA Lab, connects using JNDI"
providerName

The name of the JMS provider running this server, such as TIBCO EMS or Apache ActiveMQ. This property is optional and has no default value. However, the value for providerName is usually selected from a drop-down list in the JMS Editor that offers the following list of JMS provider vendors supported with different StreamBase adapters:

TIBCO EMS
Apache ActiveMQ
IBM WebSphere Application Server Default JMS
Solace
Other

You cannot mix TIBCO EMS and other JMS providers. That is, if you have specified a providerContextFactoryClassName property for TibjmsInitialContextFactory, you must select TIBCO EMS and cannot select the name of an alternate JMS providers.

providerName = "TIBCO EMS"
providerURL

String. The naming provider URL, as used by javax.naming.Context.PROVIDER_URL. The exact URL format depends on the provider. This property is required if connecting using JNDI.

For example:

providerURL = "tibjmsnaming://localhost:7222"
providerURL = 
providerContextFactoryClassName

String. Class name to use as a value for javax.naming.Context.INITIAL_CONTEXT_FACTORY. This parameter is required if connecting using JNDI.

For example:

providerContextFactoryClassName = "com.tibco.tibjms.naming.TibjmsInitialContextFactory"
connectionFactoryName

String. The name of a connection factory to be looked up by name via a JNDI lookup. This is then used to construct the connection object. This property is required if connecting using JNDI.

For example:

connectionFactoryName = "ConnectionFactory"
destinations

An object containing a set of one or more named destinations. This object is optional and has no default value.

For example:

destinations = {
  dest1 = {
    ...
  }
}
dest1

Example of a destination.

destinationType

Whether this destination is a topic or a queue. This object is optional and is TOPIC if the adapter default use-topics setting is true. Otherwise, set to QUEUE.

For example:

destinationType = "TOPIC"
messageSelector

String. The message selector expression (if any) to use for this destination. Syntax is defined by the JMS specification, and is a subset of the SQL92 conditional expression syntax. This property is optional and has no default value.

For example:

messageSelector = "selector1"
fieldMap

String. The field map used for this destination. If specified, the name map must exist in the adapter fieldMaps associative object. This property is optional and defaults to the adapter default field map name. See the Usage Note at the fieldMaps object before deciding to use this feature.

For example:

fieldMap = "fieldMap1"
jmsHeaderFieldMap

String. The header field map used for this destination. If specified, the header field map must exist in the adapter jmsHeaderFieldMaps associative object. This property is optional and defaults to the adapter default JMS header field map name. See the Usage Note at the fieldMaps object before deciding to use this feature.

For example:

jmsHeaderFieldMap = "headerFieldMap1"
jmsPropertyMap

String. The property map used for this destination. If specified, the property map must exist in the adapter jmsPropertyMaps associative object. This property is optional and defaults to the adapter default JMS property map name. See the Usage Note at the fieldMaps object before deciding to use this feature.

For example:

jmsPropertyMap = "propertyMap1"
timeStampFormat

String. The string format used by time stamp fields delivered by this destination. The timestamp's format name must exist in the adapter timeStampFormats associative object. This property is optional and defaults to the adapter default timestamp format name.

For example:

timeStampFormat = "tsFormat1"
deliveryTimeField

String. The field on the StreamBase tuple that is marked with the delivery time. This property is optional and defaults to the adapter default delivery time field.

For example:

deliveryTimeField = "delivery-time-field-1"
messageToTupleConverterClassName

String. Name of the class used to translate JMS messages to StreamBase tuples. This property is optional and defaults to the adapter default message-to-tuple converter name.

For example:

messageToTupleConverterClassName = "com.tibco.converter1"
tupleToMessageConverterClassName

String. Name of the class used to translate StreamBase tuples to JMS messages. This property is optional and defaults to the adapter default tuple-to-message converter name.

For example:

tupleToMessageConverterClassName = "com.tibco.deconverter1"
messageToTupleConverterCustomSettings

This is a string that is passed verbatim to the specified message-to-tuple-converter class instance. It allows implementers to pass arbitrary values to their converter. The implementing converter code is the sole entity responsible for parsing and interpreting this string. This property is optional and defaults to the adapter default converter custom settings value.

For example:

messageToTupleConverterCustomSettings = "converter 1 custom settings"
acknowledgeMode

The mode that is used to acknowledge JMS messages. Use one of the following values: AUTO_ACKNOWLEDGE, CLIENT_OK_ACKNOWLEDGE, DUPS_OK_ACKNOWLEDGE, INDIVIDUAL_ACKNOWLEDGE, NO_ACKNOWLEDGE.

This property is optional and defaults to the owning JMS server's acknowledge mode.

For example:

acknowledgeMode = "AUTO_ACKNOWLEDGE"
deliveryMode

The default delivery mode used when sending messages to JMS, if the destination does not specify a delivery mode. Use one of the following values: PERSISTENT, NON_PERSISTENT, RELIABLE_DELIVERY. This last delivery mode is specific to TIBCO EMS; using this value with any other JMS server may result in an error.

This property is optional and its default value is the value of the defaultDeliveryMode value in the default JMS server settings section.

For example:

deliveryMode = "PERSISTENT"
timeToLiveMilliseconds

Integer. The length of time in milliseconds from its dispatch time that a produced message should be retained by the message system. A time-to-live of zero means no time limit. Values less than zero are not allowed. This property is optional and its default value is the value of the defaultTimeToLiveMilliseconds value in the default JMS server settings section.

For example:

timeToLiveMilliseconds = 123
priority

Integer. The message priority level (0-9), as defined by the JMS specification. This property is optional and its default value is the value of the defaultPriority value in the default JMS server settings section.

For example:

priority = 5
disableMessageID

Boolean. Sets whether message IDs are disabled. This property is optional and its default value is the value of the defaultDisableMessageID value in the default JMS server settings section.

For example:

disableMessageID = true
disableMessageTimeStamp

Boolean. Sets whether message timestamps are disabled. This property is optional and its default value is the value of the defaultDisableMessageID value in the default JMS server settings section.

For example:

disableMessageTimeStamp = true
isTemporaryDestination

Boolean. Sets whether message timestamps are disabled. This property is optional and its default value is the value of the defaultDisableMessageID value in the default JMS server settings section.

For example:

isTemporaryDestination = false
defaultDestination

In addition to explicit destination definitions handled by the destination tags, you can specify a default destination (that is, when the JMS server's createDestinations property is set to true).

This property is optional and has no default value. For example:

defaultDestination = {
...
acknowledgeMode

The mode used to acknowledge JMS messages, which must be one of the following values: AUTO_ACKNOWLEDGE, DUPS_OK_ACKNOWLEDGE, NO_ACKNOWLEDGE. Note this adapter does not support the JMS specification's CLIENT_ACKNOWLEDGE.

This property is optional and its default value is AUTO_ACKNOWLEDGE. For example:

acknowledgeMode = "AUTO_ACKNOWLEDGE"
createDestinations

Boolean. Whether destinations should be created or looked up in JNDI. If supported by the JMS provider, destinations can be created even if they exist. Creating destinations is faster than looking them up in JNDI. This property is optional and its default value is true.

For example:

createDestinations = false
useTopics

Boolean. If this attribute is true, then destinations will be treated as Topics, otherwise they will be treated as Queues. This property is optional and its default value is true. For example:

useTopics = false
cacheDestinations

Boolean. Sets whether destinations should be cached once created. The value true offers better performance. However, if you are creating thousands of destinations caching them may adversely affect your memory footprint. This property is optional and its default value is true.

For example:

cacheDestinations = false
userName

String. The user name to use when connecting to JMS. This property is optional and has no default value. For example:

userName = "user1"
password

String. The password to use when connecting to JMS. This property is encryptable as part of node-level secrecy system described in Encrypting Sensitive Configuration Data. This property is optional and has no default value.

For example:

password = "secret1"
clientID

String. If desired, you can set a specific clientID value on the connection. This property is optional and its default value is the value of the defaultClientID value in the default JMS server settings section.

For example:

clientID = "client-id-1"
subscriberName

String. If specified, causes a durable subscription to be made and used with the specified subscriber name. Valid only when used in conjunction with destinations that are Topics. This property is optional its default value is the value of the defaultSubscriberName value in the default JMS server settings section.

For example:

subscriberName = "subscriber-1"
maxReconnectAttempts

Integer. In the event of a connection failure, this sets the number of reconnection attempts. 0 means no attempt will be made; negative values are not allowed. This property is optional and its default value is the value of the defaultMaxReconnectAttempts value in the default JMS server settings section.

For example:

maxReconnectAttempts = 5
reconnectSleepSeconds

Integer. The number of seconds to wait between reconnection attempts. Values less than or equal to zero are not allowed. This property is optional and its default value is the value of the defaultReconnectSleepSeconds value in the default JMS server settings section.

For example:

reconnectSleepSeconds = 3
destinationMonitorIntervalMilliseconds

Integer. The number of milliseconds to wait between attempts to monitor the health of subscribed destinations on this server. A value of 0 indicates no monitoring should be attempted, and so the StreamBase application will never be notified of availability or unavailability of destinations on this server.

Negative values are not allowed. This property is optional its default value is the value of the defaultDestinationMonitorIntervalMilliseconds value in the default JMS server settings section.

For example:

destinationMonitorIntervalMilliseconds = 50000
jndiSecurityPrincipal

String. Setup for the JNDI InitialContext object. Corresponds to javax.naming.Context.SECURITY_PRINCIPAL. This property is optional and its default value is the value of the defaultJNDISecurityPrincipal value in the default JMS server settings section.

For example:

jndiSecurityPrincipal = "security-principal"
jndiSecurityCredentials

String. Setup for the JNDI InitialContext object. Corresponds to javax.naming.Context.SECURITY_CREDENTIALS. This property is optional its default value is the value of the defaultJNDISecurityCredentials value in the default JMS server settings section.

For example:

jndiSecurityCredentials = "security-credentials"
jndiSecurityAuthentication

String. Setup for the JNDI InitialContext object. Corresponds to javax.naming.Context.SECURITY_AUTHENTICATION. This property is optional and its default value is the value of the defaultJNDISecurityAuthentication value in the default JMS server settings section.

For example:

jndiSecurityAuthentication = "security-auth"
jndiSecurityProtocol

String. Setup for the JNDI InitialContext object. Corresponds to javax.naming.Context.SECURITY_PRINCIPAL. This property is optional its default value is the value of the defaultJNDISecurityProtocol value in the default JMS server settings section.

For example:

jndiSecurityProtocol = "security-protocol"
jndiAuthoritative

Boolean. Setup for the JNDI InitialContext object. Corresponds to javax.naming.Context.AUTHORITATIVE. This property is optional its default value is the value of the defaultJNDIAuthoritative value in the default JMS server settings section.

For example:

jndiAuthoritative = true
jndiDNSURL

String. Setup for the JNDI InitialContext object. Corresponds to javax.naming.Context.DNS_URL. This property is optional its default value is the value of the defaultJNDIDNSURL value in the default JMS server settings section.

For example:

jndiDNSURL = "jndi-dns-url"
jndiReferral

String. Setup for the JNDI InitialContext object. Corresponds to javax.naming.Context.REFERRAL. This property is optional its default value is the value of the defaultJNDIReferral value in the default JMS server settings section.

For example:

jndiReferral = "jndi-referral"
jndiConnectionBuilderClassName

String. Fully qualified name of the Java class implementing com.streambase.sb.adapter.common.jms.common.JNDIInitialContextBuilder, which is responsible for creating the JNDI InitialContext object based on the settings described here.

For example:

jndiConnectionBuilderClassName = "com.company.connection.Builder"
jndiInitialContextBuilderClassName

String. Fully qualified name of the Java class implementing com.streambase.sb.adapter.common.jms.common.JNDIInitialContextBuilder, which is responsible for creating the JNDI InitialContext object based on the settings described here. This property is optional its default value is the value of the defaultJNDIInitialContextBuilderClassName value in the default JMS server settings section.

For example:

jndiInitialContextBuilderClassName = "com.company.initial.
  context.Builder"
jndiExtraProperties

An associative string array that defines additional properties that may be required beyond those defined in javax.naming.Context. This object is optional its default value is the value of the defaultJNDIExtraProperties value in the default JMS server settings section. For example:

jndiExtraProperties = {
  prop1 = "val1"
  prop2 = "val2"
customSettings

String. An arbitrary string passed verbatim to the implementer of the CustomConnectionBuilder interface (see the connection-builder field). This property is optional its default value is the value of the defaultJMSServerCustomSettings value in the default JMS server settings section. For example:

customSettings = "an arbitrary string passed verbatim to 
  the implementer of the CustomConnectionBuilder interface"
fieldMaps

Specifies one or more maps of JMS message fields with their corresponding StreamBase tuple field. By default, this adapter matches JMS fields with StreamBase fields when they share the same name. This behavior can be overridden with a field map, which associate a JMS field and a StreamBase field when they do not share the same name.

Each configured destination can use a different field map, specified here with different field map names. This object is optional and has no default value. For example:

fieldMaps = {
  mapForDest1 = {
    jmsField1 = "sbField1"
    jmsField2 = "sbField2"
  }
  mapForDest2 = {
    jmsFieldA = sbFieldA
  }
}

Usage Note

The JMS Configuration Editor does not support adding or editing the fieldMaps, jmsHeaderFieldMaps, or jmsPropertyMaps objects in your JMS configuration file. Best practice is to follow your EMS or JMS icon with a Map component that performs the desired mapping operations after each JMS message is received.

jmsHeaderFieldMaps

An associative array of header maps. A JMS message is delivered with a set of standard JMS header fields. You can map header fields to StreamBase fields using a JMS header field map. Each configured destination can use a different header field map. Header field maps are named and are referred to by name. This object is optional and has no default value. For example:

jmsHeaderFieldMaps = {
  headerFieldMap1 = {
    jms-headerField-Field1 = "sbField5"
    jms-headerField-Field2 = "sbField6"
  }
jmsPropertyMaps

An associative array of property maps. Either a JMS provider or a message creator can add properties to a JMS message. Think of properties as provider or user-defined headers. As with headers, you use a map to associate a property with a StreamBase field. A mapping associates a JMS property with a StreamBase field, which writes the property value to the StreamBase field.

Each configured destination can use a different property map. Property maps are named and are referred to by name. This name value pair is optional and has no default value. For example:

jmsPropertyMaps = {
  propertyMap1 = {
    jms-property1 = "sbField9"
    jms-property2 = "sbField10"
  }
timeStampFormats

A set of named timestamp formats. Fields, properties or headers delivered in a JMS message may represent timestamps, but they may not be in the same format as the StreamBase timestamp data type. A named entry in the timeStampFormats object can be used when a JMS field, header, or property delivers a timestamp that is represented as a string. Use the timestamp format to specify the format of the string so that it can be translated to the StreamBase timestamp data type.

You can specify a set of timestamp formats so that each configured destination can use a different timestamp format. Timestamp formats are named and are referred to by name. The format of StreamBase timestamps is defined in java.util.SimpleDate. This object is optional and has no default value.

For example:

timeStampFormats = {
  tsFormat1 = "format1"
  tsFormat2 = "format2"
}

The following object and properties establish defaults that the adapter is to use when a new server, new destination, or new client configuration is added to a configuration file. These settings can only be edited in the text-based HOCON Configuration File Editor, no in the JMS Editor.

jmsServerDefaults

This object defines a collection of default settings that are used when a corresponding JMS server setting is not specified for a particular server. This object is optional and has no default value. For example:

jmsServerDefaults = {
...
}
defaultClientID

String. Default JMS server client ID. This property is optional and has no default value.

For example:

defaultClientID = "a-default-client-ID"
defaultSubscriberName

String. Default JMS server subscriber name. This property is optional and has no default value.

For example:

defaultSubscriberName = "a-default-subscriber-name"
defaultMaxReconnectAttempts

Integer. Default maximum number of reconnect attempts. This property is optional and has no default value.

For example:

defaultMaxReconnectAttempts = 10
defaultReconnectSleepSeconds

Integer. Default number of seconds to wait between reconnection attempts. This property is optional and has default value 30 seconds.

For example:

defaultReconnectSleepSeconds = 5
defaultDestinationMonitorIntervalMilliseconds

Integer. Default destination monitoring interval. This property is optional and has default value zero, meaning no monitoring.

For example:

defaultDestinationMonitorIntervalMilliseconds = 10000
defaultJNDISecurityPrincipal

String. Default JNDI security principal. This property is optional and has no default value. For example:

defaultJNDISecurityPrincipal = "default-jndi-security-principal"
defaultJNDISecurityCredentials

String. Default JNDI security credentials. This property is optional and has no default value. For example:

defaultJNDISecurityCredentials = "default-jndi-security-credentials"
defaultJNDISecurityAuthentication

String. Default JNDI security authentication. This property is optional and has no default value. For example:

defaultJNDISecurityAuthentication = "default-jndi-security-authentication"
defaultJNDIDNSURL

String. Default JNDI DNS URL. This property is optional and its default value is false.

For example:

defaultJNDIDNSURL = "default-jndi-dns-url"
defaultJNDIReferral

String. Default JNDI referral setting. This property is optional and has no default value.

For example:

defaultJNDIReferral = "default-jndi-referral"
defaultJNDIConnectionBuilderClassName

String. Default JNDI connection builder class name. This property is optional and has no default value.

For example:

defaultJNDIConnectionBuilderClassName = "default.jndi.connection.
  builder.class.name"
defaultJNDIInitialContextBuilderClassName

Default initial context builder class name. This property is optional and has no default value.

For example:

defaultJNDIInitialContextBuilderClassName = "default.jndi.initial.
  context.builder.class.name"
defaultJNDIExtraProperties

String. Default properties passed to the JNDI naming context. This property is optional and has no default value.

For example:

defaultJNDIExtraProperties = {
  name1 = "val1"
  name2 = "val2"
}
defaultJMSServerCustomSettings

Default custom settings for a custom connection builder. This property is optional and has no default value. For example:

defaultJMSServerCustomSettings = "Default custom settings for 
  a custom connection builder"
defaultFieldMap

String. Optionally, specify a default for convenience, if many destinations use the same field map. However, see the Usage Note for the fieldMaps object. For example:

defaultFieldMap = "fieldMap1"
defaultJMSHeaderFieldMap

String. Optionally, specify a default for convenience, if many destinations use the same header field map. However, see the Usage Note for the fieldMaps object. For example:

defaultJMSHeaderFieldMap = "headerFieldMap2"
defaultJMSPropertyMap

String. Optionally, specify a default for convenience, if many destinations use the same property map. However, see the Usage Note for the fieldMaps object. For example:

defaultJMSPropertyMap = "propertyMap1"
defaultTimeStampFormat

String. If many destinations use the same time stamp format, it may be convenient to specify a default. For example:

defaultTimeStampFormat = "tsFormat2"
defaultDeliveryTimeField

String. Optionally, specify a default for convenience, if many destinations use the same delivery time field. For example:

defaultDeliveryTimeField = "myDeliveryTimeField"
defaultMessageToTupleConverterClassName

String. Optionally, specify a default for convenience, if many destinations use the same message-to-tuple converter class. For example:

defaultMessageToTupleConverterClassName = "com.tibco.myMessageToTupleConverter"
defaultTupleToMessageConverterClassName

String. Optionally, specify a default for convenience, if many destinations use the same tuple-to-message converter class. For example:

defaultTupleToMessageConverterClassName = "com.tibco.myTupleToMessageConverter"
defaultMessageToTupleConverterCustomSettings

String. Optionally, specify a default for convenience, if many destinations use the same message-to-tuple custom settings. For example:

defaultMessageToTupleConverterCustomSettings = "a default converter settings string"
defaultDeliveryMode

The default delivery mode used when sending messages to JMS, if the destination does not specify a delivery mode. You must use one of the following values: PERSISTENT, NON_PERSISTENT, RELIABLE_DELIVERY. This last delivery mode is specific to TIBCO EMS; using this value with any other JMS server may result in an error.

This value is passed directly to javax.jms.MessageProducer.setDeliveryMode(). This property is optional and its default value is NON_PERSISTENT.

For example:

defaultDeliveryMode = "NON_PERSISTENT"
defaultTimeToLiveMilliseconds

String. Optionally, specify a default for convenience, if many destinations have the same time-to-live requirement. For example:

defaultTimeToLiveMilliseconds = 333
defaultPriority

Integer. Optionally, specify a default for convenience if many destinations use the same Destination.priority. This property is optional and has default value of 4, per the JMS specification.

For example:

defaultPriority = 1
defaultDisableMessageID

Boolean. Optionally, specify a default for convenience, if many destinations use the same ID disable setting. For example:

defaultDisableMessageID = false
defaultDisableMessageTimeStamp

Boolean. Optionally, specify a default for convenience, if many destinations use the time stamp disable setting setting. For example:

defaultDisableMessageTimeStamp = false

HOCON Configuration File Sample

The following is an example of the com.tibco.ep.streambase.configuration.adapter type with the JMSAdapter root object.

name = "sample-JMSAdapter"
version = "1.0.0"
type = "com.tibco.ep.streambase.configuration.adapter"
configuration = {
  JMSAdapter = {
    adapterClassName = "com.streambase.sb.adapter.jms.enqueue.JMSReader"
    jmsServers = {
      YourServerName = {
        description = "sample server, connects using JNDI"
        providerName = "TIBCO EMS"
        providerContextFactoryClassName = 
          "com.tibco.tibjms.naming.TibjmsInitialContextFactory"
        providerURL = "tibjmsnaming://localhost:7222"
        connectionFactoryName = "ConnectionFactory"
        destinations = {
          dest1 = {
            destinationType = "TOPIC"
            messageSelector = "selector1"
            fieldMap = "fieldMap1"
            jmsHeaderFieldMap = "headerFieldMap1"
            jmsPropertyMap = "propertyMap1"
            timeStampFormat = "tsFormat1"
            deliveryTimeField = "delivery-time-field-1"
            messageToTupleConverterClassName = "com.tibco.converter1"
            tupleToMessageConverterClassName = "com.tibco.deconverter1"
            messageToTupleConverterCustomSettings = "converter 1 custom settings"
            acknowledgeMode = "AUTO_ACKNOWLEDGE"
            deliveryMode = "PERSISTENT"
            timeToLiveMilliseconds = 123
            priority = 5
            disableMessageID = true
            disableMessageTimeStamp = true
            isTemporaryDestination = false
          }
          dest2 = {
            destinationType = "QUEUE"
            messageSelector = "selector2"
            fieldMap = "fieldMap2"
            jmsHeaderFieldMap = "headerFieldMap2"
            jmsPropertyMap = "propertyMap2"
            timeStampFormat = "tsFormat2"
            deliveryTimeField = "delivery-time-field-2"
            messageToTupleConverterClassName = "com.tibco.converter2"
            tupleToMessageConverterClassName = "com.tibco.deconverter2"
            messageToTupleConverterCustomSettings = "converter 2 custom settings"
          }
        }
        defaultDestination = {
          destinationType = "QUEUE"
          messageSelector = "defaultSelector"
          fieldMap = "fieldMap1"
          jmsHeaderFieldMap = "headerFieldMap1"
          jmsPropertyMap = "propertyMap1"
          timeStampFormat = "tsFormat1"
          deliveryTimeField = "delivery-time-field-1"
          messageToTupleConverterClassName = "com.tibco.defaultConverter"
          tupleToMessageConverterClassName = "com.tibco.defaultDeconverter"
          messageToTupleConverterCustomSettings = "default converter custom settings"
          deliveryMode = "RELIABLE_DELIVERY"
          timeToLiveMilliseconds = 321
          priority = 4
          disableMessageID = false
          disableMessageTimeStamp = false
          isTemporaryDestination = false
        }
        acknowledgeMode = "AUTO_ACKNOWLEDGE"
        createDestinations = false
        useTopics = false
        cacheDestinations = false
        userName = "user1"
        password = "secret1"
        clientID = "client-id-1"
        subscriberName = "subscriber-1"
        maxReconnectAttempts = 5
        reconnectSleepSeconds = 3
        destinationMonitorIntervalMilliseconds = 50000
        jndiSecurityPrincipal = "security-principal"
        jndiSecurityCredentials = "security-credentials"
        jndiSecurityAuthentication = "security-auth"
        jndiSecurityProtocol = "security-protocol"
        jndiAuthoritative = true
        jndiDNSURL = "jndi-dns-url"
        jndiReferral = "jndi-referral"
        jndiConnectionBuilderClassName = "com.company.connection.Builder"
        jndiInitialContextBuilderClassName = "com.company.initial.context.Builder"
        jndiExtraProperties = {
          prop1 = "val1"
          prop2 = "val2"
        }
        customSettings = "an arbitrary string passed verbatim to the implementer 
          of the CustomConnectionBuilder interface"
      }
      AnotherServerName = {
        description = "Sample ActiveMQ Server"
        providerName = "Apache ActiveMQ"
        connectionFactoryClassName = "org.apache.activemq.jndi.ActiveMQInitialContextFactory"
        connectionFactoryURL = "tcp://localhost:61616"
        acknowledgeMode = "DUPS_OK_ACKNOWLEDGE"
        createDestinations = true
        useTopics = true
        cacheDestinations = true
        userName = "user2"
        password = "secret2"
        clientID = "client-id-2"
        subscriberName = "subscriber-2"
        maxReconnectAttempts = 10
        reconnectSleepSeconds = 5
        destinationMonitorIntervalMilliseconds = 25000
      }
    }
    fieldMaps = {
      mapForDest1 = {
        jmsField1 = "sbField1"
        jmsField2 = "sbField2"
      }
      mapForDest2 = {
        jmsFieldA = sbFieldA
      }
    }
    jmsHeaderFieldMaps = {
      headerFieldMap1 = {
        jms-headerField-Field1 = "sbField5"
        jms-headerField-Field2 = "sbField6"
      }
      headerFieldMap2 = {
        jms-headerField-Field3 = "sbField7"
        jms-headerField-Field4 = "sbField8"
      }
    }
    jmsPropertyMaps = {
      propertyMap1 = {
        jms-property1 = "sbField9"
        jms-property2 = "sbField10"
      }
      propertyMap2 = {
        jms-property3 = "sbField11"
        jms-property4 = "sbField12"
      }
    }
    timeStampFormats = {
      tsFormat1 = "format1"
      tsFormat2 = "format2"
    }
    associatedWithEngines = [ "javaengine", "otherengine[0-9]" ]
    jmsServerDefaults = {
      defaultClientID = "a-default-client-ID"
      defaultSubscriberName = "a-default-subscriber-name"
      defaultMaxReconnectAttempts = 10
      defaultReconnectSleepSeconds = 5
      defaultDestinationMonitorIntervalMilliseconds = 10000
      defaultJNDISecurityPrincipal = "default-jndi-security-principal"
      defaultJNDISecurityCredentials = "default-jndi-security-credentials"
      defaultJNDISecurityAuthentication = "default-jndi-security-authentication"
      defaultJNDISecurityProtocol = "default-jndi-security-protocol"
      defaultJNDIAuthoritative = true
      defaultJNDIDNSURL = "default-jndi-dns-url"
      defaultJNDIReferral = "default-jndi-referral"
      defaultJNDIConnectionBuilderClassName = "default.jndi.connection.builder.class.name"
      defaultJNDIInitialContextBuilderClassName = "default.jndi.initial.context.builder.class.name"
      defaultJNDIExtraProperties = {
        name1 = "val1"
        name2 = "val2"
      }
      defaultJMSServerCustomSettings = "Default custom settings for a custom connection builder"
    }
    defaultFieldMap = "fieldMap1"
    defaultJMSHeaderFieldMap = "headerFieldMap2"
    defaultJMSPropertyMap = "propertyMap1"
    defaultTimeStampFormat = "tsFormat2"
    defaultDeliveryTimeField = "myDeliveryTimeField"
    defaultMessageToTupleConverterClassName = "com.tibco.myMessageToTupleConverter"
    defaultTupleToMessageConverterClassName = "com.tibco.myTupleToMessageConverter"
    defaultMessageToTupleConverterCustomSettings = "a default converter settings string"
    defaultDeliveryMode = "NON_PERSISTENT"
    defaultTimeToLiveMilliseconds = 333
    defaultPriority = 1
    defaultDisableMessageID = false
    defaultDisableMessageTimeStamp = false
  }
}