Contents
The TIBCO StreamBase® Adapter for ICAP/EBS Live XML allows a StreamBase application to connect to the ICAP/EBS Live data feed to receive XML-based market data. The EBS Live XML adapter is an input-only adapter.
The EBS Live XML Input adapter has the following capabilities:
-
Establishes a TCP-based connection to the EBS Live market data server.
-
Converts incoming market data messages (snapshot, update) in XML form from the EBS Live server and sends them as tuples to the StreamBase application.
-
Optionally, can receive commands from the StreamBase application to log on to, or log out from, the EBS Live server.
The Input adapter exposes a set of input and output ports, the fields for which are defined later in this document. In addition, the adapter exposes a set of adapter properties as decribed in the next section.
This section describes the properties you can set for this adapter, using the Adapter Properties tab of the Properties view in StreamBase Studio.
In the table in this section, the Property column shows each property name as found in the one or more adapter properties tabs of the Properties view for this adapter.
When using this adapter in a StreamSQL program with the APPLY JAVA statement, you must convert the Studio property names to parameter names using the simple formula described in APPLY Statement. For cases where the Studio property name is not convertible in an obvious way, the StreamSQL parameter name is included in the Description column.
Name: Use this field to specify or change the component's name, which must be unique in the application. The name must contain only alphabetic characters, numbers, and underscores, and no hyphens or other special characters. The first character must be alphabetic or an underscore.
Adapter: A read-only field that shows the formal name of the adapter.
Class: A field that shows the fully qualified class name that implements the functionality of this adapter. Use this class name when loading the adapter in StreamSQL programs with the APPLY JAVA statement. You can right-click this field and select Copy from the context menu to place the full class name in the system clipboard.
Start with application: If this field is set to Yes or to a module parameter that evaluates to true, an instance of this adapter starts as part of the containing StreamBase Server. If this field is set to No or to a module parameter that evaluates to false, the adapter is loaded with the server, but does not start until you send an sbadmin resume command, or until you start the component with StreamBase Manager. With this option set to No or false, the adapter does not start even if the application as a whole is suspended and later resumed. The recommended setting is selected by default.
Enable Error Output Port: Select this check box to add an Error Port to this component. In the EventFlow canvas, the Error Port shows as a red output port, always the last port for the component. See Using Error Ports and Error Streams to learn about Error Ports.
Description: Optionally enter text to briefly describe the component's purpose and function. In the EventFlow canvas, you can see the description by pressing Ctrl while the component's tooltip is displayed.
Property | Data Type | Default | Description |
---|---|---|---|
Server Hostname | string |
localhost
|
The name (or IP address) of the EBS Live server to which to connect. |
Port Number | int | 4002 | The port to which to connect on the EBS Live server. |
Add Command Input Port | check box | false (cleared) |
If this option is selected, an input port is added to allow the application
to send commands to the adapter. The schema used by this port and the
available commands are described in Input Ports.
(StreamSQL property name: addCommandPort) |
Add Status Output Port | check box | false (cleared) | If this option is selected, an output port is added on which status tuples are emitted on connection state transitions. |
Log Level | drop-down list | INFO | Controls the level of verbosity the adapter uses to send notifications to the console. This setting can be higher than the containing application's log level. If set lower, the system log level will be used. Available values, in increasing order of verbosity, are: OFF, ERROR, WARN, INFO, DEBUG, TRACE, and ALL. |
Use the Concurrency tab to specify parallel regions for this instance of this component, or multiplicity options, or both. The Concurrency tab settings are described in Concurrency Options, and dispatch styles are described in Dispatch Styles.
Caution
Concurrency settings are not suitable for every application, and using these settings requires a thorough analysis of your application. For details, see Execution Order and Concurrency, which includes important guidelines for using the concurrency options.
The EBS Live XML Input adapter has an output port, to which will be routed all
Snapshot
(rates_update type="snapshot") and
Update
(rates_update type="update") messages sent by
the EBS Live server. The schema for this port is described below. A second,
optional status output port, which is used to report connection state transitions,
can be enabled by checking the Add Status Output Port property.
The EBS Live documentation describes Snapshot
messages
as follows: “A snapshot message contains
the current state of the EBS market. It is the initial message sent to a subscriber
upon the establishment of a connection.”
The same documentation describes the Update
message as
follows: “An update message contains all
market changes since the previously sent update message.”
Notes
While the EBS Live XML specification defines a third type of message,
heartbeat
, those are managed by the adapter
internally and are never passed on to the application.
The XML messages sent by EBS Live usually contain repeating data groups. This is handled in the StreamBase schema by having a field of type list with an element type of tuple, the fields of which match the fields of the message's repeating group.
The output port routes incoming Snapshot
(rates_update type="snapshot") and Update
(rates_update type="update") messages to the StreamBase application. Each field
in the schema is named to match its XML counterpart's tag name.
The schema for this port is pre-set by the adapter, and is described in the following table:
Field Name | Field Type | Description | ||
---|---|---|---|---|
type | string |
The value for this field is either snapshot
or update .
|
||
sequence_number | long | The sequence_number element is used to maintain a running count of all messages sent to a subscriber from the EBS MRFv3 Server. When a subscriber connects, the sequence_number will be incremented starting from one for each EBS MRFv3 message sent to the connection. The sequence_number is a positive integer value. Its range is 1 through 2,147,483,647. Though unlikely to occur, should the sequence_number reach its maximum value, it resets to one and resumes incrementing. The sequence_number field always starts from one for new and reestablished connections. | ||
msg_date | timestamp | The msg_date field holds the date on which the EBS MRFv3 Server generated the message. In this timestamp, only the date (year, month, date) part is meaningful; the time part (hours, minutes, etc.) is always set to midnight. | ||
msg_time | timestamp | The msg_time field holds the Coordinated Universal Time (UTC) at which the EBS MRFv3 Server generated the message. In this timestamp, only the time part (hours, minutes, seconds, milliseconds) are meaningful. The date part (year, month, date) is always set to Jan 1st 1970. | ||
update_element | list<tuple> | An EBS MRFv3 XML message can contain multiple update_element elements. It can contain only one update_element per unique currency pair and trading instrument defined in the description, such as EUR.USD.SPOT. | ||
description | string |
A description is an uppercase string of the currency pair and instrument
type (such as Spot or NDF). Spot descriptions consist of the two
currencies and SPOT , delimited by periods.
Non-Deliverable Forward (NDF) currency pairs contain an additional code
for the tenor appended to the instrument type. Each currency is three
characters in length. Tenors are expressed in weeks (W), months (M) or
years (Y). An example description element value is EUR.USD.SPOT . For NDFs, the value includes the tenor, as
in this example: USD.KRW.NDF.1M .
|
||
update_detail | list<tuple> |
Contains a list of all the updates that apply to the currency pair
represented by this update_element . Note
that some numerical values contained in this tuple are of type
string in the schema. This is to accommodate
the fact that EBS Live may use a value of '? ' (stale) or '- '
(inactive) for those numerical fields.
|
||
type | string | Indicates the category of the market event. Refer to the EBS Live XML documentation for a list of possible values. | ||
amount | string |
An integer value representing an aggregated amount of all Bids at a
corresponding price or an aggregated amount of all Offers at a
corresponding price. The amount field reflects units of the base currency
scale. For example, for precious metals, the unit is in ounces, and 10
million USD is reported as 10. The value can also be '? ' or '- '.
|
||
amounts | list<string> |
A list of an aggregated amount of all Bids at a corresponding price or a
list of an aggregated amount of all Offers at a corresponding price. The
amounts element is only non-null in the update_detail elements of type order_book_bid and order_book_offer . Amounts can contain up to five values.
Amounts reflect units of the base currency scale. For example, for
precious metals, the unit is in ounces, and 10 million USD is reported as
10. Values also allow for '? ' and
'- '.
|
||
bid | string |
All price , bid ,
and offer field values are sent as decimal
numbers, such as 1.4350, with the number of decimal places displayed
dependent on the currency pair. The field's actual type is string,
allowing for '? ' and '- '. Field values for price ,
bid , and offer
of '? ' indicate the field's data is
unavailable. Clients must handle this as a stale rates error condition.
Field values for price , bid , and offer of
'- ' indicate there is no price in the market
or insufficient data to calculate a derived data element. This usually
occurs for infrequently traded currency pairs. It does not represent an
error condition. For both TWAP and VWAP, the field value for price will be zero (not '- ') for no market price or insufficient data condition.
All update_detail elements include a
non-null price element, except those of type
open , prev_open , and prev_close ,
which contain non-null bid and offer fields instead. Value also may be '? ' or '- '.
|
||
offer | string |
See the description for the bid field above.
Value also may be '? ' or '- '.
|
||
price | string |
See the description for the bid field above.
Value also may be '? ' or '- '.
|
||
count | int |
An integer value representing either the number of deals or quotes
depending on the context. For VWAP, the field value for count is zero for no market price or insufficient data
condition.
|
||
error | double | A decimal number representing the confidence factor associated with the benchmark. | ||
interval | int | The amount of time over which the Traded Average Price or the Volume Average Price was calculated. Interval is in terms of seconds. | ||
prices | list<string> |
A list of prices that comprise the order book, or a list of Bids or
Offers that comprise the order book. The prices field only contains values in update_detail fields of type order_book_bid and order_book_offer . Prices can contain up to five values.
Values also may be '? ' or '- '.
|
||
price_date | timestamp |
The date of the price event as recorded by the EBS system is stored in
the price_date field. This is used for
updating or revising reported events. price_date denotes when the price occurred whereas
upd_date (see below) denotes when the event
driving the price occurred. In this timestamp, only the date (year,
month, date) part is meaningful; the time part (hours, minutes, etc.) is
always set to midnight.
|
||
price_time | timestamp |
The UTC time of the price event as recorded by the EBS system is stored
in this field. This is used for updating or revising reported events for
Market High/Low calculations. price_time
denotes when the price occurred whereas upd_time (see below) denotes when the event driving the
price occurred. In this timestamp, only the time part (hours, minutes,
seconds, milliseconds) is meaningful. The date part (year, month, date)
is always set to Jan 1st 1970.
|
||
trader_count | string |
Total number of unique Trader IDs for a specific Bid amount or a specific
Offer amount. Value also may be '? ' or
'- '.
|
||
trader_counts | list<string> |
A list of the total number of unique Trader IDs for a specific Bid amount
or a specific Offer amount comprising the order book. The trader_counts field is only non-empty in the
update_detail fields of type order_book_bid and order_book_offer . trader_counts can contain up to five values. Values also
may be '? ' or '- '.
|
||
upd_date | timestamp | The date of the market event as recorded by the EBS system. In this timestamp, only the date (year, month, date) part is meaningful; the time part (hours, minutes, etc.) is always set to midnight. | ||
upd_time | timestamp | The UTC time of the market event as recorded by the EBS system. In this timestamp, only the time part (hours, minutes, seconds, milliseconds) is meaningful. The date part (year, month, date) is always set to Jan 1st 1970. | ||
volume | double |
Aggregate number of units traded for all deals within an interval. The
volume field reflects units of the base currency scale. For example, for
precious metals, the unit is in ounces, and 10 million USD is reported as
10. For VWAP and Net Volume Flow, the field value for volume is zero for no market price or insufficient data.
|
||
price_attr | string |
For an update_detail type equal to
benchmark , contains the data's source; such
as EBS. Contains the associated regional time zone when update_detail type equals high/low or open/close .
Valid times zones are LN (London), NY (New York), SY (Sydney), TK
(Tokyo), HK (Hong Kong/Singapore), and GL (global). The price_attr field value is always in uppercase.
|
The optional status output port is used to report connection status transitions.
The schema for this port is pre-set by the adapter, and is described in the following table:
Field Name | Field Type | Description |
---|---|---|
type | string |
The type of status tuple, which is currently always Connection .
|
action | string |
The action associated with the connection state change: Connected , Failed , or
Disconnected .
|
object | string | The server host and port number. |
message | string | A human-readable description of the event. |
By default, the EBS Live XML Input adapter has no input ports. If the Add Command Input Port option is enabled, an input port is created to allow applications to send commands to the adapter.
The schema for this port is expected to contain a single field:
Field Name | Field Type | Field Description |
---|---|---|
Command
|
string | Always required. Contains the name of the command to execute. See below for a list of the available commands. |
Available commands include:
-
Connect: Log on to the configured EBS Live server.
-
Disconnect: Log out of the configured EBS Live server.
The EBS Live XML Input adapter uses typecheck messages to help you configure the adapter in your StreamBase application. In particular, the adapter generates typecheck messages for the following reasons:
-
A required property is missing.
-
One or more required fields in the Command input port is missing or is of the wrong type or size.
When suspended, the adapter closes the connection to the EBS Live server.
When resumed, the adapter reconnects to the EBS Live server.