• Concepts
    • Important Information
    • TIBCO Documentation and Support Services
    • Introduction
      • Challenges of Service Delivery
    • Design
      • Design Activities
    • Runtime
      • Runtime Overview
      • Hosts
      • Nodes
      • Features
      • Resource Templates
      • Resource Instances
    • Administration
      • Overview of ActiveMatrix Administrator
      • TIBCO ActiveMatrix Administrator
      • Enterprise
      • Environments
      • Messaging Bus
      • Governance
        • Identity Management
        • Policy Management
    • Service Components
      • Composites
      • Components
      • Component Implementation
      • Services and References
      • Interfaces
      • Bindings
      • Properties
      • Message Exchange Patterns
      • Java Components
      • Composite Components
      • Mediation Components
      • WebApp Components
      • Spring Components
      • REST Bindings
    • TIBCO ActiveMatrix Policy Director Governance
      • Advantages over Hard-Coded Policies
      • Features
      • High-Level Architecture
        • Policy Director Governance Administration
        • Governance Agent
      • Policy Distribution Engine
      • Policy Enforcement
        • Policy Enforcement Point Identifiers
        • Order of Action
        • Governance Agent's Merge Behavior
      • Governance Definitions and Concepts
        • Governance Controls
        • Governance Control Templates
        • Governed Object
        • Object Groups
        • Shared Resources
        • Policy Enforcement Host
        • Policy Enforcement Point
        • Policy Decision Point
        • Policy Action
        • Policy Runtime Store
        • Policy Error
        • Policy Conflict
    • TIBCO Service Performance Manager
      • Components
      • TIBCO Enterprise Message Service Server
      • TIBCO Service Performance Manager Server
      • Database
      • Dashboard
      • Example Business Scenario
      • Essential Definitions
      • Project Life Cycle
  • Development Tutorials
    • Important Information
    • TIBCO Documentation and Support Services
    • Basic SOA Design Tutorials
    • Policy Tutorials
      • Configuring the ResourceInstance Attribute in an External Policy
      • Preparing an Application that Injects Resource Instances into Policies
  • Composite Development
    • Important Information
    • TIBCO Documentation and Support Services
    • TIBCO Business Studio
      • TIBCO Business Studio Configuration
        • Target Platforms
          • Displaying the Target Platform
          • Creating a Target Platform File
          • Setting the Target Platform
        • Platform Installation
          • Setting the Platform Installation
          • Platform Installation Reference
      • Starting TIBCO Business Studio
      • Accessing TIBCO Business Studio Help
    • SOA Projects
      • Special Folders
        • Enabling and Disabling Special Folders
      • Versions
      • WSDL Files
        • Renaming a Port Type
      • Validation
        • Validating WSDL and Schema Files Referenced by a Composite
        • Disabling Validation
        • Resolving Validation Rule Violations
      • Creating an Empty SOA Project
      • Creating a Basic SOA Project
      • Creating a SOA Project from WSDL Files
      • Creating an SOA Project from an Implementation
      • Finding out the Version of TIBCO Business Studio Using which a Project was Created
      • Enabling "TIBCO SOA Platform Extension"
      • Legacy Projects
        • Migrating Legacy Projects
        • Migration Reference
    • Composites
      • Creating a Composite
      • Setting Composite Diagram Preferences
      • Adding an Element to a Composite
        • Popup Toolbars
        • Palette
      • Application Modularization
        • Run Configuration Reference
      • Running and Debugging a Composite
        • Creating a Run Configuration
        • Running a Composite
        • Run Configuration Reference
        • Creating a Debug Configuration
        • Debugging a Composite
          • Setting Breakpoints
          • Removing Breakpoints
          • Configuring Breakpoints
          • Controlling Composite Execution
        • Debug Configuration Reference
        • Terminating a Configuration
      • Composite Reference
    • Components
      • Creating a Component
      • Changing the Implementation Type of a Component
      • Configuring a Components External Custom Feature
      • Component Reference
    • Services and References
      • Interfaces
      • Adding a Service or Reference to a Component
      • Adding a Service or Reference to a Composite
      • Promoting a Component Service or Reference
      • Static and Dynamic Wiring
        • Creating a Static Wire Between a Service and a Reference
        • Configuring a Reference for Dynamic Wiring
      • Service Reference
      • Reference Reference
    • Bindings
      • Viewing Service and Reference Bindings
      • Adding a Binding to a Service or Reference
      • SOAP Bindings
        • SOAP Binding Reference
        • Fault Messages
        • WS-Addressing
          • Endpoint References
          • Message Addressing Properties
          • Validation and Fault Handling
          • Configuring the Action Property
          • Enabling WS-Addressing
        • Generating a Concrete WSDL File
          • WSDL Generation Reference
        • Generating a SOAP Request
        • WS-Reliable Messaging
          • Enabling WS-Reliable Messaging
      • REST Bindings
      • JMS Bindings
        • JMS Binding Reference
      • Context Parameters
        • Creating Context Parameters
        • Mapping Context Parameters to Header Fields
        • Context Parameter Reference
      • Enabling Transactions in SOAP and JMS Bindings
    • Policy Management
      • Policies
      • Governed Objects
      • Intents
        • Configuring Intents
        • Intents Reference
        • At Least Once Intents
        • At Most Once Intents
        • Authorization Intents
        • Client Authentication Intents
        • Consumer Confidentiality Intents
        • Consumer Integrity Intents
        • Credential Mapping Intents
        • Managed Transaction Intents
        • Prepare Before Undeploy Intents
        • Provider Confidentiality Intents
        • Provider Integrity Intents
        • Secure Virtualization Intents
        • Start Services First Intents
        • Transacted OneWay Intents
      • Policy Sets
        • Displaying the Policy Sets Picker
        • Configuring Policy Sets
        • Editing Embedded Policy Sets
        • Creating an External Policy Set
        • Configuring External Policy Sets with XML
        • Embedded Policy Sets Reference
          • JMS At Most Once
          • JMS At Least Once
          • JMS Transacted OneWay
          • Managed Transaction
          • Message Transmission Optimization Mechanism (MTOM)
          • Prepare Before Undeploy
          • Secure Virtualization
          • Start Service First
          • Threading
          • Virtualization At Least Once
          • Virtualization Transacted OneWay
          • Virtualize
          • Never Virtualize
          • WS-Addressing for References
          • WS-Addressing for Services
          • WS-Reliable Messaging
        • Policy Templates Reference
          • Policy Template to Intents Reference
          • Authorization By Role Policies
          • Basic Authentication Policies
          • Basic Credential Mapping Policies
          • Basic Or Username Token Authentication Policies
          • SAML Authentication For SSO Policies
          • SAML Credential Mapping For SSO Policies
          • Username Token Authentication Policies
          • WS-Security Consumer Policies
          • WS-Security Provider Policies
    • Transactions
      • Managed Global Transactions
      • Transacted OneWay Transactions
    • Resource Templates
      • Resource Instances
      • Creating a Resource Template
      • Opening a Resource Template
      • Finding References to a Resource Template
      • Renaming a Resource Template
      • Resource Templates Reference
      • Resource Templates With Scope
      • Changing the Scope of a Resource Template
      • Modifying Resource Templates to Install Multiple BPM Environments
      • Application Deployment Patterns
      • Hibernate
      • HTTP Client
      • JDBC
        • Configuring Third-Party JDBC Drivers
      • JMS Resource Templates
        • Configuring Third-Party JMS Drivers
        • JMS Connection Factory
        • JMS Destination
        • JNDI Connection Configuration
      • JMS Destination Configuration
      • LDAP Connection
      • Security Resource Templates
        • Identity Provider
        • Kerberos Identity Provider
        • Keystore Provider
          • Keystores
          • Creating a Keystore With a Username and Password
        • SSL Client Provider
      • SMTP
      • Thread Pool
      • Teneo
    • Properties
      • Creating a Property
      • Promoting a Component Property
      • Setting the Value of a Binding Property
      • Setting the Value of a Composite Property
      • Setting the Value of a Component Property
      • Setting the Value of a Resource Template Property
        • Creating an Obfuscated Password
      • Properties Reference
    • Substitution Variables
      • Creating a Substitution Variable
      • Creating a Substitution Variable File
      • Finding References to a Substitution Variable
      • Renaming a Substitution Variable
    • Custom Features
      • Creating a Custom Feature
      • Finding References to a Custom Feature
      • Renaming a Custom Feature
      • Configuring Plug-ins
      • Configuring Feature Dependencies
      • Configuring Excluded Custom Feature Dependencies
      • Custom Feature Reference
    • Shared Libraries
      • Bundles and Plug-in Projects
      • Creating a Library Plug-in Project
    • Distributed Application Archives
      • Packaging a Composite in a DAA
      • Packaging a Custom Feature in a DAA
      • Regenerating a Distributed Application Archive Containing a Composite
      • Generating and Verifying Derived DAAs
      • Distributed Application Archive Specifications
      • Qualifier Replacement
    • Distributions
      • Creating a Distribution
      • Editing a Distribution
      • Creating a Distribution Template
    • Applications
      • Creating, Deploying, and Starting an Application
      • Stopping, Undeploying, and Deleting an Application
      • Debugging Deployed Applications
        • Checking Remote Debugger Status
        • Creating a Debug Configuration
        • Launching a Debug Configuration
        • Attaching a Debugger to a Running Application
    • TIBCO ActiveMatrix Administrator
      • Deployment Servers
        • Creating a Deployment Server
        • Connecting to a Deployment Server
        • Editing Deployment Server Properties
        • Refreshing a Deployment Server
        • Disconnecting from a Deployment Server
        • Deployment Server Reference
      • Administrator Explorer View
        • Displaying the Administrator Explorer View
      • Administrator Command-Line Interface
        • Understanding Build Files
        • Understanding AMXAdminTask
        • Actions Performed Using CLI
        • Understanding Data Files
        • Understanding Objects
        • Object Formats
        • Property File Reference
        • Generating an Administrator Command-Line Interface Script
          • Script Configuration
          • Administrator Connection Configuration
          • Application Configuration
          • Distribution
          • Property Configuration
          • Wiring Configuration
        • Running Administrator Command-Line Interface Scripts
    • TIBCO Business Studio Command-Line Interface
      • Running a TIBCO Business Studio Command-Line Interface Script
      • TIBCO Business Studio Command-Line Reference
      • TIBCO Business Studio Command-Line Task Reference
    • Logging
      • Application Logging
      • Message Flow Logging
      • Logging Payload Reference
    • IPv6 Support
  • Java Component Development
    • Important Information
    • TIBCO Documentation and Support Services
    • Java Components
      • Creating a Java Component
      • Configuring a Java Components Implementation
      • Updating a Java Component
      • Configuring a Java Components Custom Feature
      • Upgrading a Java Component
      • Component Feature Dependencies
      • Java Component Reference
    • Java Component Implementations
      • Data Binding
        • Generating XML Data Binding Classes
        • Data Binding Classes for Abstract and Concrete WSDL Files
        • XML Data Binding Reference
      • Opening a Java Component Implementation
      • Generating a Java Component Implementation
      • Generate Java Component Implementation Reference
      • Regenerating a Java Component Implementation
      • Upgrading a Java Component Implementation
      • Life Cycle Events
      • Component Context
      • Accessing a Property
      • Accessing a Resource
        • Accessing a Hibernate Resource
        • Accessing a JDBC Resource
        • Accessing JMS Resources
        • Accessing LDAP Connections
        • Accessing SMTP Connections
        • Accessing a Teneo Resource
      • Invoking an HTTP Request
      • Invoking a Reference Operation
      • Error Handling
        • SOAPException Reference
      • Context Parameters
        • Working with Context Parameters
      • Endpoint References
        • Retrieving an Endpoint Reference
        • Creating an Endpoint Reference
    • Custom Features
      • Bundles and Plug-in Projects
        • Configuring Dependencies on External Java Classes
      • Versions
    • Converting Migrated Java Component Implementations
      • Creating an Abstract Class
      • Editing a Manifest
      • Regenerating a Component Implementation
      • Removing 2.x Data Binding JAR Files
      • Correcting Custom Feature File
    • Default XML to Java Mapping
  • Mediation Component Development
    • Important Information
    • TIBCO Documentation and Support Services
    • Introduction to Mediation
      • Mediation Flows
      • Message Exchange Patterns
      • Mediation Flow Interfaces
      • Planning Target and Mediation Interfaces
      • Paths in a Mediation Flow
      • Mediation Tasks
      • Mediation Exchange
      • Designing Mediation Flows
    • Working with Mediation Flows
      • Starting the Mediation Flow Wizard
      • Creating a New, Empty Mediation Flow
      • Creating New Mediation Flows from Existing Web Services
      • Editing Mediation Flow Editor Preferences
      • Working with Mediation Flow Properties
        • Validation of Message
        • Adding a Mediation Flow Property
        • Deleting a Mediation Flow Property
      • Working with Interfaces
        • Adding Interfaces to Mediation Flows
        • Deleting Interfaces from Mediation Flows
        • Moving Mediation Interfaces
        • Using the AutoMediate Feature
        • Creating Local WSDL Files
        • Supported Policies
      • Working with Mediation Paths
        • Changing Mediation Paths
        • Deleting Mediation Paths
      • Working with Message Context Properties
        • Context Parameters
        • Mediation Context Parameters
        • Undeclared Fault Headers
        • Context Parameters in Mediation Components
        • Adding Context Parameters
        • Deleting Context Parameters
        • Defining the Scope of Context Parameters
      • Working with Exchange Variables
        • Defining Exchange Variables
        • Setting Exchange Variable
        • Creating Simple Schemas
      • Working with Tasks
        • Adding a Task to a Path
        • Deleting a Task From a Path
      • Mediation Components
    • Invoking an Operation
      • Configuring Invoke Operation Tasks
    • Logging Mediation Exchange Information
      • Mediation Appenders and Loggers
      • Configuring a Log Task
    • Routing Messages in a Mediation Flow
      • Paths and Route Tasks
        • Defining a Route
        • Adding Routing Cases
        • Specifying Case Targets in the Decision Table
        • Modifying Case Names
        • Modifying Destinations
        • Moving Cases in the List
        • Deleting Cases
        • Nesting Multiple Route Tasks
      • Adding and Deleting Variables
      • Mapping Data to Variables
      • Routing Conditions
        • Editing Route Task Conditions
        • Conditions for XPath Route Tasks
        • Changing Route Tasks to XPath Route Tasks
    • Transforming Tasks
      • Example of Transformation
      • Basic Mapping
      • Using XPath Editor
      • Data Contribution to the Mediation Exchange
      • External Stylesheets for Data Transformation
      • Specifying an External Stylesheet for Data Transformation
      • Schema Components
      • Context Panel
      • Message Panel
      • Data and Function Tabs
        • TIBCO XPath Functions
        • Creating Custom XPath Functions
        • Exporting Custom XPath Functions
        • Deploying Custom XPath Functions
        • Testing Custom XPath Functions
        • Mapper Toolbar Buttons
        • Right-Click Menu in the Message Panel
        • Surrounding a Component With a Choose Statement
        • If Statements
        • For Each Statements
        • Adding a Variable to a Mapping
        • Managing Mappings
        • Repairing Incorrect Mappings
        • Mapping an Empty Complex Type
      • Using XPath
      • Transforming XML with Related Tasks
    • Querying a Database
      • JDBC Resource Templates
      • Defining a Resource Template
      • Configuring a JDBC Driver
      • Registering a JDBC Driver
      • Configuration Tabs of the Query Database Task
    • Dynamic Requests
      • Service Providers for Dynamic Composite References
      • Configuring Dynamic Binding
      • Configuring Dynamic Target Interfaces
      • Pattern Variables Usage
      • Dynamic Reference Task Setting
      • General Tab Configuration
      • Input Specification
      • Configuring Dynamic References in Composite
      • Creating and Deploying Composites Used By Dynamic Binding
    • Replying to Messages
    • Fault Processing in a Mediation Flow
      • Throwing Faults in Mediation Flows
      • Fault Paths
      • Catch Fault Configuration
      • Catching Faults from the Mediation Flow
      • Sending Faults to the Invoker
    • Custom Mediation Tasks
      • Eclipse Plug-in Reference
      • Support Files
      • Creating the Model Plug-in
      • Creating the UI Plug-in
      • Creating the Runtime Plug-in
      • Writing Custom Mediation Code
      • Accessing Task Input/Output Schema
      • Modifying the Mediation Task Data
      • Defining Model Attributes
      • Custom Mediation Task Categories
      • Thrown Faults
      • Runtime Exceptions
      • Installing Custom Mediation Tasks
      • Deploying Custom Mediation Tasks
      • Testing Custom Mediation Tasks
    • Reference
      • Catch Fault
      • End Mediation
      • Generate Reply
      • Handle Reply
      • Invoke Operation
      • Log
        • Information for Standard Log Messages
        • Information for Custom Log Messages
      • Parse XML
      • Query Database
      • Render XML
      • Route Task
      • Send Fault
      • Set Context
      • Set Dynamic Reference
      • Set Exchange Variable
      • Throw Fault
      • Transform
      • Validate XML
      • XPath Route
    • TIBCO AutoMediate Command-Line Tool
      • AutoMediate Command-Line Tool Flow
      • Running the AutoMediate Command-Line Tool
      • AutoMediate Command Syntax and Options
      • AutoMediate ANT Command Syntax and Options
    • Introduction to gXML Applications
      • Developing gXML Applications
        • Implementing GxApplication
        • Implementing GxCatalog
        • Implementing GxResolver
        • Injecting DOM
      • gXML Recipes
        • Parsing a Character Stream and a Byte Stream
        • Constructing a Data Model Tree Programmatically
        • Validating
        • Navigation
        • Mutation
        • Serialization
        • XPath
        • XSLT
        • XQuery
        • Validation
  • Mediation Java API Reference
    • Important Information
    • TIBCO Documentation and Support Services
    • API Reference Pages
  • Web Application Component Development
    • Important Information
    • TIBCO Documentation and Support Services
    • Overview
      • Introduction
      • Approaches
    • Web Application Components
      • Creating a WebApp Component
        • Creating an SOA Project
        • Adding an Empty WebApp Component
        • Starting With an Existing Implementation
        • OSGi-enabled WebApp Component
        • Creating an OSGi-enabled WebApp Component
      • Configuring a Web Application Component
        • Configuring a WebApp Components Custom Feature
        • Configuring a WebApp Components External Custom Feature
        • WebApp Component Reference
        • Adding Configuring a WebApp Components Security
          • Using Form-based Authentication Policy
            • Adding Configuring Form-based Authentication Policy
          • Security Constraint Policy
            • Security Constraint Definition Example
            • Adding or Configuring a Security Constraint Policy
      • Updating a WebApp Component
      • ZeroConfiguration DAA Creation Using WAR
      • Limitations on WAR Files
    • Web Application Component Implementations
      • Opening an Implementation
      • Generating an Implementation
        • Generate WebApp Component Implementation
          • Code Generation Details Dialog
          • XML Data Binding Classes Dialog
          • Create Servlet Dialog
      • Regenerating an Implementation
      • Refreshing an Implementation
      • Accessing a Property
      • Invoking a Reference Operation
        • Enabling a Reference Injection
        • Adding a Reference to a WebApp Component with Implementation Type as WAR
          • Adding a Reference in TIBCO Business Studio
            • Creating a WAR File with the Reference Details
            • Adding a WebApp Component Using the WAR File
            • Adding a Context Parameter to an Implementation of Type WAR
            • Adding a Dynamic Endpoint Reference to an Implementation of Type WAR
          • Adding a Reference Outside of TIBCO Business Studio
      • WebApp Component Testing
        • RAD Communication
        • JAD Communication
      • Logging
      • Handling Errors
    • URL Mappings
      • Use of URL Paths
      • Specification of Mappings
        • Implicit Mappings
  • Spring Component Development
    • Important Information
    • TIBCO Documentation and Support Services
    • Spring Components
      • Creating a Spring Component
      • Updating a Spring Component
      • Component Feature Dependencies
      • Spring Component Reference
    • Spring Component Implementations
      • Spring Bean Configuration Files
      • Data Binding
        • Generating XML Data Binding Classes
        • Data Binding Classes for Abstract and Concrete WSDL Files
        • XML Data Binding Reference
      • Opening a Spring Component Implementation
      • Opening a Spring Bean Implementation
      • Generating a Spring Component Implementation
      • Regenerating a Spring Component Implementation
      • Generate Spring Component Implementation Reference
      • Life Cycle Events
      • Component Context
      • Accessing a Property
      • Accessing a Resource
        • Accessing a Hibernate Resource
        • Accessing a JDBC Resource
        • Accessing JMS Resources
        • Accessing LDAP Connections
        • Accessing SMTP Connections
        • Accessing a Teneo Resource
      • Invoking an HTTP Request
      • Invoking a Reference Operation
      • Error Handling
        • SOAPException Reference
      • Context Parameters
        • Working with Context Parameters
      • Endpoint References
        • Retrieving an Endpoint Reference
        • Creating an Endpoint Reference
      • Referencing an External Spring Application
    • Custom Features
      • Bundles and Plug-in Projects
        • Configuring Dependencies on External Java Classes
      • Versions
    • Default XML to Java Mapping
  • REST Binding Development
    • Important Information
    • TIBCO Documentation and Support Services
    • TIBCO ActiveMatrix Binding Type for REST Overview
      • REST Binding Type Key Terms
      • REST Binding Type Usage
      • REST Binding Type Key Features
        • Easy-to-Use Configuration GUI
        • Message Exchange Patterns
        • Error Handling
      • Complex XSD Constructs Mapping Rules
    • REST Binding Development
      • Payload Generation
        • Generating XML Payloads
        • Generating Badgerfish JSON Payloads
      • Overriding Media Types (For Service Only)
      • Configuring REST Bindings
      • Generating a Swagger JSON File from TIBCO Business Studio
      • Overview of the Swagger JSON File
      • Sample Swagger JSON File
      • Sending and Consuming HTTP Headers
        • Creating and Mapping Context Parameters
        • For REST Service Binding
          • Configuring an Inbound Message
          • Configuring an Outbound Message
        • For REST Reference Binding
          • Configuring for Request (Outbound) Flow
          • Configuring for Response (Inbound or Fault) Flow
        • Mapping HTTP Status Code and Status Message
      • Modifying a REST Resource Configuration File
      • Policies Supported
    • Sample Projects
      • Executing the Bookstore Sample
        • Importing the Bookstore Sample Project
        • Reviewing the WSDL that Defines the Service interface
        • Reviewing the Composite Configuration
        • Running the Bookstore Sample
      • Executing the MultipleComplexTypes Sample
        • Importing the MultipleComplexTypes Sample Project
        • Reviewing the Mediation Flow
        • Running the MultipleComplexTypes Sample
      • Executing the Bookstore Client Sample (Reference)
        • Importing the Bookstore Client Sample Project
        • Reviewing the REST Resource Configuration File That Defines the REST Service Interface
        • Running the Bookstore Client Sample
      • Executing the Facebook Client Sample (Reference)
        • Importing the Facebook Client Sample Project
        • Running the Facebook Client Sample
      • Executing the Pass-Through Mode Sample (Reference)
      • Executing the rest.context Sample
        • Running the rest.context Example
        • Breakdown of the rest.context Scenario
        • REST-Java-REST: Success Scenario of REST-Java
        • REST-Java-REST: Fault Scenario of REST-Java
      • Executing the rest.extendedJSONConversion Sample
        • Running the rest.extendedJSONConversion Example
        • REST-Java-REST: Runtime Node Logs for Rest-Java
    • Limitations
      • General Limitations
      • Validation Limitations
      • Service Limitations
      • Schema Limitations
    • Troubleshooting
  • Administration Tutorials
    • Important Information
    • TIBCO Documentation and Support Services
    • Overview
    • Tutorial Prerequisites
      • Set Up the Runtime Environment
      • Create a UDDI Server in Administrator
      • Configure Administrator Command-Line Properties
      • Set Up the Service Invocation Environment
    • How to Configure Logging
      • Creating a Logging Appender
      • Navigating to a Logging Configurations List
      • Creating a Logging Configuration for a Host or a Node
      • Applying a Logging Configuration
    • How to Deploy and Run the Hello World Application
      • Completing Hello World Prerequisites
      • Creating the Hello World Application
      • Creating an HTTP Connector Resource Template
      • Creating and Installing the HTTP Connector Resource Instance
      • Distributing the Hello World Application
      • Deploying and Starting the Hello World Application
      • Generating the Hello World WSDL File
      • Invoking the Hello World Service
      • Viewing the Hello World Service in the UDDI Registry Server
    • How to Deploy and Run the Enhanced Hello World Application
      • Completing Enhanced Hello World Prerequisites
      • Deploying and Starting the Date Manager Application from the CLI
      • Creating the Hello World Application
      • Creating an HTTP Connector Resource Template
      • Creating and Installing the HTTP Connector Resource Instance
      • Creating and Installing the HTTP Client Resource Instance
      • Deploying and Starting the Enhanced Hello World Application
      • Distributing the Enhanced Hello World Application
      • Generating the Hello World WSDL File
      • Invoking the Hello World Service
    • How to Deploy and Run the Java8 Hello World Application
    • How to Deploy and Run REST Binding Samples
    • How to Deploy and Run the Phonebook Application
      • Completing Phonebook Prerequisites
      • Creating the Phonebook Application
      • Creating an HTTP Connector Resource Template
      • Creating and Installing the HTTP Connector Resource Instance
      • Creating and Installing the JDBC Shared Resource Instance
      • Distributing the Phonebook Application
      • Deploying and Starting the Phonebook Application
      • Generating the Phonebook WSDL File
      • Invoking the Phonebook Service
    • How to Deploy and Run the Hello World Web Application
      • Completing Hello World Web Application Prerequisites
      • Creating the Hello World Web Application
      • Creating an HTTP Connector Resource Template
      • Creating and Installing the HTTP Connector Resource Instance
      • Distributing the Hello World Web Application
      • Invoking the Hello World Web Application
      • Deploying and Starting the Hello World Web Application
    • How to Deploy and Run the Content-Based Routing Mediation Application
      • Creating the Routing and Target Service Mediation Applications
      • Creating HTTP Connector Resource Templates
      • Creating and Installing Resource Instances
      • Distributing the Routing and Target Service Applications
      • Deploying and Starting the Routing and Target Service Applications
      • Generating the Routing WSDL File
  • Administration
    • Important Information
    • TIBCO Documentation and Support Services
    • Introduction to Administrator
      • Components and Servers
      • Using the Web Interface
        • Logging in to the Web Interface
    • Understanding Administrator Object States
      • Runtime State
      • Runtime States
      • Action History
      • Action History Reference
      • Outstanding Actions
      • Synchronization
    • Using Command-Line Interface (CLI)
      • Location of Sample Files
      • Sample Files Usage Guidelines after Upgrading to Hotfix
      • Invoking the Command-Line Interface
      • Understanding Build Files
      • Understanding AMXAdminTask
      • Understanding Data Files
      • Understanding Objects
        • Supported Objects
        • Object Formats
        • Object Navigation
        • Inter-Object Relationships
      • Configuring Timeout
      • Property File Reference
      • Actions Performed Using CLI
    • Managing the Administrator Server
      • Administration Support for Older Hosts and Nodes
      • Administrator Configuration Reference
      • Default Ports Used by Servers
      • Plug-Ins
        • Plug-Ins Reference
      • Notification Server
        • Editing the Notification Server Configuration using the GUI
        • Editing the Notification Transport Server Configuration using the CLI
          • Notification Transport Server Configuration Locations
          • The TIBCO ActiveMatrix Administrator Status Cache
          • Characteristics of the Approach
            • Prerequisites for Invoking the Notification Transport Server Configuration Update Target
            • Sample Scripts
            • Features
            • TRA properties and TIBCO ActiveMatrix Administrator CLI Options
          • Executing the Notification Transport Server Configuration Update from the Administrator CLI
            • Available ANT Targets
            • End-to-End Execution with Sample Outputs
            • Managing Hosts in an Inconsistent State
            • Sample Outputs
        • Reconnecting to EMS
          • Reconnect to EMS for Selected Host Using the GUI
          • Reconnect to EMS for Selected Host Using the CLI
          • Reconnect to EMS for JMS Deployment Server Connections
          • Reconnect to EMS for an Enterprise Using the GUI
      • Updating Internal HTTP Connector Configuration
        • Prerequisites
        • Sample Scripts
        • Features
        • Eligibility of a Host or Node for Update
        • Track Logs Using OperationID
        • Executing the ANT Script to Update the Internal HTTP Connector
        • End-to-End Execution with Sample Outputs
        • Managing Hosts and Nodes in "Not Running" State
        • Retrieving "Out of Sync" Keystore Resource Instances
      • Authentication Realms
      • Administrator Replication
      • Messaging Bus Configuration of an Enterprise
        • Determining Whether an Enterprise Uses a Messaging Bus
        • Configuring an Enterprise to Stop Using a Messaging Bus
    • Managing Environments
      • Determining Whether a New Environment should use a Messaging Bus
      • Creating an Environment
      • Configuring the Messaging Bus of an Environment
      • Changing the Messaging Bus of an Environment
      • Determining Whether an Environment Uses a Messaging Bus
      • Environment General Reference
      • Environment Configuration Reference
      • Messaging Bus Reference
    • Managing Hosts
      • Host Processes
      • Creating a TIBCO Host Instance
      • Adding a TIBCO Host
      • Adding a Host While Creating a New Node
      • Editing a TIBCO Host
      • Installing a TIBCO Host
      • Assigning a Host to An Environment
      • Starting a TIBCO Host
      • Stopping a TIBCO Host
      • Restarting a TIBCO Host
      • Uninstalling a TIBCO Host
      • Deleting a TIBCO Host
      • Enabling Secure Communication between a Host and an Administrator Server
      • Registering a TIBCO Host Instance as a Windows Service
      • Unregistering Hosts
      • Binding Hosts to an Administrator Server
        • Discover Hosts Reference
        • Register Host Reference
      • Appending tibcohost Instance Name to the Executable Process for Adminstrator Created TIBCO Host
      • Updating the JVM Configuration of a Host
        • Adding all JVM Properties to java.extended.properties
        • Updating the JVM Properties of a Host Through the GUI
        • Updating the JVM Properties of a Host Through the CLI
          • Setting the JVM Properties of a Host Through the CLI
          • Modifying JVM Properties of a Host Through the CLI
          • Deleting JVM Properties of a Host Through the CLI
      • Properties of Resource Templates
        • Hosts Reference
        • Host General Reference
        • Host Configuration Reference
        • Host Substitution Variables Reference
        • Host Resource Instances Reference
      • Caveats for Host Life Cycle Management
    • Managing Nodes
      • Node Processes
      • Developer Node
      • Navigating to a Nodes List
      • Creating a Node
      • Determining Whether a Node Uses a Messaging Bus
      • Creating Multiple Nodes with the Same Name
      • Extending Target Platform in Design Time
        • Extending Target Platform through the GUI
        • Extending Target Platform through the .ini File
        • Limitation
      • Date Display for Features
      • Copying Preparing for Undeploy (PFU) Components across BPM Nodes
        • Overview
        • Understanding the CLI action copyPFUComponents
        • Running the CLI action copyPFUComponents
        • Example Scenario for copyPFUComponents
      • Editing a Node
        • Updating the Port Number for a Node
        • JVM Arguments of a Node
        • Updating the JVM Configuration for a Node using Administrator UI
        • Enabling and Disabling the Java Security Manager
        • Enabling and Disabling Debuggers
      • Installing or Syncing Nodes
      • Uninstalling Nodes
      • Uninstalling Features using Wildcards
      • Starting Nodes
      • Manually Restarting Nodes
      • Stopping Nodes
      • Restarting a Node
      • Graceful Node Shutdown
        • TRA Property
        • Log Information for the Graceful Node Shutdown Feature
      • Deleting Nodes
      • Deleting Node Features using Wildcards
      • Threading Policy
        • Setting the Threading Policy Properties Through the GUI
        • Setting the Threading Policy Properties in the Node's TRA File
        • Example of Threading Policy
      • Properties of Resource Templates
        • Nodes Reference
        • Node General Reference
        • Node Configuration Reference
        • Node Substitution Variables Reference
        • Node Resource Instances Reference
      • Transaction Recovery Configuration
        • Configuration Properties for HOWL Log Files
        • Deleting HOWL Logs
      • Viewing an Aggregated Status of a Node
        • Using the GUI
        • Using the CLI
        • Using the Web Service API
        • Checks Done for an Aggregated Status of a Node
        • Limitations
    • Managing Applications
      • Creating an Application
      • Distributing an Application
      • Application Dependencies
      • Deploying Applications
        • Deployment Preflight Check
      • Tracking Application Deployment Progress
      • Undeploying Applications
        • Undeployment Preflight Check
      • Determining Whether an Application Uses a Messaging Bus
      • Starting Applications
      • Stopping Applications
      • Deleting Applications
      • Editing an Application
        • Upgrading an Application
      • Applications Reference
      • Displaying an Applications Dependencies
      • Displaying an Applications Components
      • Displaying an Applications Bindings
      • Application General Reference
      • Application Configuration Reference
      • Application Substitution Variables Reference
      • Application Distribution Reference
      • Application Folders
        • Creating a Folder
        • Renaming a Folder
        • Deleting a Folder
        • Moving an Application to a Folder
      • Properties
        • Setting a Property Value
        • Editable Properties Reference
        • Non-Editable and Policy Set Properties Reference
      • Services and References
        • Displaying the Bindings for a Service or a Reference
        • Adding a Binding to a Service
        • Editing a Binding
        • Deleting a Binding
        • Configuring a Binding for a Reference
        • Promoting a Service to the Environment
        • Getting a List of Promoted Services
          • Generating a WSIL Servlet Page
          • Invoking the EndpointService API Directly
        • Promoting a Reference to the Environment
        • Reference Details Reference
        • Manual Binding Reference
        • Bindings
          • SOAP Bindings
            • Starting and Stopping Bindings
            • Generating a WSDL File for a SOAP Service Binding Instance
            • SOAP Binding Reference
            • WS-Addressing
              • Endpoint References
              • Message Addressing Properties
              • Validation and Fault Handling
              • Configuring the Action Property
            • WS-Reliable Messaging
          • JMS Bindings
            • JMS Binding Reference
          • REST Bindings
            • Adding a REST Binding
            • Editing a REST Binding
            • Deleting a REST Binding
            • REST Binding Reference
            • Visualizing and Testing REST Service Bindings Using Swagger
              • Accessing Swagger UI through ActiveMatrix Administrator
              • Swagger UI
              • Invoking an Operation
                • Invoking a GET Operation
                • Invoking a POST Operation
              • Generating a Swagger JSON File
              • Overview of the Swagger JSON File
              • Sample Swagger JSON File
              • Troubleshooting
        • Wire to Binding Reference
      • Viewing Policies Applied to an Application
    • Managing Resource Templates
      • Resource Templates With Scope
      • Creating a Resource Template
      • Editing a Resource Template
      • Incremental Editing of a Resource Template
      • Renaming a Resource Template
      • Changing the Scope of a Resource Template
      • Deleting a Resource Template
      • Creating an Obfuscated Password
      • Configuring Mutual Authentication
      • Configuring and Preparing HTTP Connector for Jetty 9
      • HTTP Request Referrer Header Validation
      • Configuring Third-party Drivers
        • Configuring a Third-party JDBC Driver
        • Upgrading a Third-party JDBC Driver Using the CLI
          • Sample Output
          • Sample Logs: Upgrading Third-party JDBC Drivers
        • Testing a Connection to a JDBC Resource
        • Disabling Test Connection to a JDBC Resource
        • Configuring a Third-party JMS Driver
      • Configuring the Read Response Timeout for an LDAP Connection
      • Keystores
      • Creating a Keystore Containing a User Name and Password
      • Properties of Resource Templates
        • Hibernate
        • HTTP Client
        • HTTP Connector
        • JDBC
        • JMS Resource Templates
          • JMS Connection Factory
          • JMS Connection Factory Configuration
          • JMS Destination
          • JMS Destination Configuration
          • JNDI Connection Configuration
        • LDAP Connection
        • SMTP
        • Teneo
        • Thread Pool
        • Security Resource Templates
          • Identity Provider
          • Kerberos Authentication
          • Kerberos Identity Provider
          • Keystore Provider
            • Keystores
              • Creating a Keystore Containing a User Name and Password
          • LDAP Authentication
          • Mutual Identity Provider
          • SiteMinder Authentication
          • SSL Client Provider
          • SSL Server Provider
          • Trust Provider
          • WSS Authentication
    • Managing Resource Instances
      • Creating Resource Instances on Nodes
      • Installing Resource Instances on Nodes
      • Uninstalling Resource Instances from Nodes
      • Deleting Resource Instances from Nodes
      • Resource Instances Reference
    • Using Diagnostics
      • Accessing and Using Diagnostics Commands
      • Retrieving Log Files for Hosts and Nodes from Administrator
      • Service Health Check
        • Overview
        • Invoking Service Health Check
          • Executing a Request from the ActiveMatrix Administrator UI
          • Response: Graphical Representation on UI
          • Executing a Request from API Testing Tools
          • Response: XML Representation
          • Elements and Attributes in a Response
          • Database Queries for Service Health Check of JDBC Shared Resource
        • Example of a Complex Service Health Check Scenario
        • Status of Failure Scenarios
        • Caching a Service Health Check Response
          • Enabling or Disabling the Caching of a Service Health Check Response
          • Specifying the Validity Duration for a Service Health Check
        • Ping a SOAP or REST Endpoint
        • Specifying a Timeout Value for a Service Health Check Invocation
        • Suppressing Stack Trace in a Service Health Check Response
        • Service Health Check Logging
          • Log Information Specific to Service Health Check
          • Tracing a Request Flow Using the CorrelationID
          • Types of Log Messages
          • Deployment Time Messages
          • Runtime Messages
        • Disabling the Service Health Check
        • Service Health Check Samples
          • Service Health Check Sample for SOAP/HTTP
          • Service Health Check Sample for SOAP/JMS
          • Service Health Check Sample for REST
        • Custom Health Check Using Annotations
          • Scenarios Explaining Custom Service Health Check
          • Using TIBCO ActiveMatrix Business Studio for Service Health Check Annotations
            • Generating a Custom Service Health Check Method
              • Sample of Custom Service Health Check Method
            • Combinations of Custom Service Health Check Operations
            • Removing the Custom Service Health Check Method
            • Restrictions and Limitations
            • Coding Guidelines
          • Using the Custom Service Health Check Feature (Runtime)
            • Enabling Custom Service Health Check at the Node Level
            • Request Parameters
            • Response Elements
            • Logging
          • Service Health Check Sample for Annotations
      • Enterprise Deployment Health Check
        • Objectives
        • Running Enterprise Deployment Health Check
          • Running Enterprise Deployment Health Check using ActiveMatrix Administrator UI
            • Ping TIBCO ActiveMatrix Entities in Real Time
            • Enterprise Test Deploy
            • Getting ActiveMatrix Administrator Information
            • Getting ActiveMatrix Administrator Configuration Information
            • Custom Enterprise Health Check
            • Enterprise Health Check
            • Viewing Reports for Current or Past Health Check Tests
            • Updating Timeout Value for Enterprise Deployment Health Check Tests
            • Disabling Enterprise Deployment Health Check from ActiveMatrix Administrator UI
          • Running Enterprise Deployment Health Check using ActiveMatrix Administrator CLI
            • Prerequisites for Invoking Health Check Targets
            • Invoking Health Check Targets
            • Available Ant Targets
            • Restrictions for Target Usage
            • Chaining Targets
            • Data File: enterprise_healthcheck_data.xml
            • Schematic Representation of Enterprise Deployment Health Check
            • Checking Status of Entities after Reconnect to EMS
              • Performing Notification Ping for Entire TIBCO ActiveMatrix Enterprise
              • Performing Notification Ping for Selected Hosts
              • Performing Notification Ping for Selected Nodes
              • Performing Notification Ping for Selected Environments
              • Configuring Total Time Interval and Polling Time Interval of Notification Ping
              • Viewing Report File for Notification Ping
        • Sample CLI Output Explanation
          • CLI Target Validation and Upload of Sample Application
          • Starting Enterprise Deployment Health Check
          • Metadata of TIBCO ActiveMatrix Administrator
          • Runtime Information of TIBCO ActiveMatrix Administrator (Collected in Real-time)
          • TIBCO ActiveMatrix Enterprise-wide Summary
          • Hosts and Nodes: Initialization Status and Ping Response
          • Starting Test Deployment
          • Test Deployment Cleanup and Reporting
          • Getting Runtime ActiveMatrix Administrator Information when Performing CLI Action
        • Report File Explanation
        • Sample Enterprise Deployment Health Check Outputs
          • Get Only Metadata of TIBCO ActiveMatrix Administrator
          • Get Only Runtime Configuration Information of TIBCO ActiveMatrix Administrator
          • Get Metadata Along With Runtime Information of TIBCO ActiveMatrix Administrator
          • Ping the Entire TIBCO ActiveMatrix Enterprise
          • Ping TIBCO ActiveMatrix Nodes and Hosts for Select Environments
          • Ping TIBCO ActiveMatrix Nodes for Select Hosts
          • Perform Test Deployment on Select Nodes in a TIBCO ActiveMatrix Environment
      • OSGi Diagnostic Tool
        • Accessing the OSGi Diagnostic Tool
        • Introduction to the GUI of the OSGi Diagnostic Tool
          • Node Page
          • Bundle Page
          • Endpoint Page
          • Implementation Component Page
          • Packages Search Utility Page
        • Exporting Reports from the Tool
        • Searching in Current Report
        • Searching for Packages
        • Reloading Data in Current Report
        • Sample Scenario: Node does not start during installation or upgrade
        • Sample Scenario: Application is in Running State but Unable to Respond to Queries
    • Export and Import
      • Exported Objects
      • Export Options
      • Exporting Data from TIBCO ActiveMatrix Administrator
        • Exporting from GUI
        • Exporting from CLI
          • Selecting Data to be Exported from CLI
          • Selecting Objects for Exporting from CLI
          • Selecting Export Options from CLI
          • Selecting the Administrator from which Data is to be Exported
          • Downloading the Archive File
          • Deleting the Archive File Automatically
        • Export Archive Directory Structure
        • Folders and Files in Exported Data
        • Export Reporting and Error Handling
      • Importing Data to TIBCO ActiveMatrix Administrator
        • Prerequisites for Importing
        • Modifying Archive Structure Before Import
        • Import Options
        • Scope of Execution of Import CLI Script
        • Import Order for Applications with Dependencies
        • Logging for Import
        • Post Builds Reports for Import
        • Error Handling
        • Troubleshooting
        • Running Report on Data Files
        • Running Report on Data on the Target Administrator Server
      • Limitations
      • FAQ for Export
      • FAQ for Import
    • Substitution Variables
      • Creating a Substitution Variable
      • How Substitution Variables Are Resolved
    • Software Management
      • Adding Features to the Enterprise
      • Adding a Feature to a Node
      • Adding Third-Party Libraries to Nodes
      • Setting Node Features
      • Removing Features from a Node
      • Deleting Features from the Enterprise
      • Enabling or Disabling the Node Features using the tibcohost.exe Command
      • Synchronizing Node Feature List
        • Features Sync Status
      • Adding Application Templates to the Enterprise
      • Deleting Application Templates
      • Features Reference
      • Application Template Reference
      • Versions
      • Distributed Application Archives
        • Managing DAA Files
        • Uploading a Distributed Application Archive
        • Distributed Application Archive Reference
    • Monitoring
      • Monitoring Entities in an Enterprise from a Single Page
        • Accessing the Enterprise Status Page
        • Introduction to the UI of the Enterprise Status Page
          • Home Tab
          • Host Tab
          • Node Tab
          • Resource Instance Tab
          • Application Tab
          • Enterprise Tab
        • Searching for Entities in an Enterprise
          • Supported Entities and their Runtime States
          • Values in the Parent Column
          • Values in the Synchronization Column
          • Actions that can be Performed on Searched Entities
          • Search in Current Table
          • Bookmark a Search URL
          • Reload Data in the Table
          • Export Data from the Table
      • Accessing Administrator Dashboards
    • TIBCO ActiveMatrix SPM Dashboard
      • Accessing the Dashboard
      • Enterprise Dashboards
      • Dimension Hierarchies
      • Asset Status
      • Web Interface
      • Server Configuration
      • User Preferences
      • System Alerts
      • Filtering Alerts
      • Time Range Selectors
      • Working with Tables
      • Health Monitoring Summary
      • Environments Dashboard
      • Environment Details
      • Nodes
      • Node Details
      • Applications
      • Application Details
      • Services
      • Service Details
      • Service Instance Details
      • Shared Resource Instances
      • HTTP Resource Details
      • JDBC Resource Details
      • JMS ConnectionFactory Resource Details
      • ThreadPool Resource Details
      • Rules
      • Structure of a Rule
      • Example Authoring a Rule with E-mail Action
      • Rules on Asset Status
      • Rule Evaluation and Batching
      • Creating a New Rule
      • Defining the Scope of a New Rule
      • Setting Condition
      • Setting Action
      • Clearing Condition
      • Clearing Action
      • Customization of an Email-Action
      • Rules with Auto-Populated Dimensions
      • Rules Dashboard
      • Using HTTP Header Information to Emit Statistics
      • Emitting 'Sender Identifier' Information
        • Configuring the Sender Identifier Expression
          • Configuring the Sender Identifier Expression from TIBCO ActiveMatrix Business Studio
          • Configuring the Sender Identifier Expression Using the CLI
          • Configuring the Sender Identifier Expression Using the TIBCO ActiveMatrix Administrator UI
          • Sample: Sender Identifier Expression
          • Log Messages: Sender Identifier
    • Users, Groups, and Permissions
      • Creating a User
      • Changing a User Password
      • Resetting a User Password
      • Assigning Superuser Privileges
      • Removing Superuser Privileges
      • Adding Users to Groups
      • Removing Users from Groups
      • Creating a Root Group
      • Creating a Subgroup
      • Deleting a Group
      • Setting Object-Specific Permissions
      • Setting Enterprise Permissions
      • Permission Reference
      • Groups
      • Superusers
      • Users
      • Permissions
    • TIBCO ActiveMatrix Policy Director Governance Administration
      • Object Groups
        • Creating an Object Group
        • Publishing an Object Group
        • Copying a Object Group
        • Deleting an Object Group
        • Command-Line Interface for Object Groups
          • Build Files for Object Groups
          • Creating a Fixed Object Group
          • Creating a Dynamic Object Group
            • Defining the Search Criteria for Object Groups
            • Selecting Attributes for The Search Criteria
      • Governance Controls Overview
        • Authentication
        • Authorization
        • Confidentiality
        • Integrity
        • Credential Mapping
        • The mustUnderstand Attribute
        • Command-Line Interface for Governance Controls
          • Build Files for Governance Controls
          • Using the Command-Line Interface to Define Governance Controls
            • Use Case for User Name Token Authentication
            • Use Case for WSS Consumer Reference
            • Use Case for WSS Provider Reference
      • Governance Control Management
        • Creating a Governance Control
        • Deploying a Policy
        • Activating a Policy
        • Synchronizing a Policy
        • Displaying a Policy
        • Copying a Policy
        • Deactivating a Policy
        • Undeploying a Policy
        • Deleting a Policy
        • Enforcing Integrity and Confidentiality
          • Enforcing WSS Provider
          • Enforcing WSS Consumer
        • Managing Governed Objects by Using the Governed Object Synchronization Utility
          • Synchronizing Governed Objects
          • Deleting Governed Objects
      • Governance Control Reference
        • Creating an LDAP Connection Resource Template
        • Configuring Kerberos Authentication Service Provider
        • Configuring SiteMinder
        • Basic Authentication
        • Basic Credential Mapping
        • Username Token Authentication
        • Authentication by Kerberos
        • Authentication by SiteMinder
        • Authorization by Role
        • Logging
          • View Log Utility
        • SAML Authentication for SSO
        • SAML Credential Mapping for SSO
        • WS Reliable Messaging
        • WS-Addressing for Reference
        • WS-Addressing for Service
        • WSS Consumer
        • WSS Provider
        • Policy Status List
      • Proxy Service Management
        • Registering an External Service
        • Modifying an External Service
        • Deleting an External Service
        • Creating a Proxy Application
        • Configuring a Proxy Application
          • Using System Preferences
        • Updating a Proxy Application
        • Deploying a Proxy Application
        • Starting a Proxy Application
        • Stopping a Proxy Application
        • Undeploying a Proxy Application
        • Deleting a Proxy Application
        • Command-Line Interface for Proxy Service Management
          • Build File for Proxy Service Management
          • Creating a Proxy Application Using the Command-Line Interface
      • Security Error Message
    • System Logging
      • Log Viewer
        • Running Searches
        • Search Builder
          • Filter Area
          • Adding and Removing Filters
          • Event Models
            • Base Event Format Attribute Reference
            • Engine Event Format Attribute Reference
            • BW Engine Event Format Attribute Reference
        • Log Table
        • Deleting Log Entries
      • Log Services
        • Editing Log Service Properties
        • Log Service Property Reference
      • Logging Appenders
        • Creating a Logging Appender
        • Logging Appender Reference
        • Log Entry Enrichment
        • JMS Appender Configuration
          • Setting the JMS Appender Configuration Properties
      • Downloading Logs for an Application
      • Logging Configurations
        • Navigating to a Logging Configurations List
        • Creating a Logging Configuration for a Host or a Node
        • Applying a Logging Configuration
        • Logging Configuration Reference
      • Payload Services
        • Payload Service Properties Reference
      • Creating Additional Log and Payload Services
    • Schema Validation for SOAP Messages
      • Overview
      • Configuration
        • Enabling Schema Validation at Node Level
        • Disabling Schema Validation at Node Level
        • Enabling Schema Validation at Binding Level
          • From TIBCO Business Studio
          • From TIBCO ActiveMatrix Administrator UI
          • From TIBCO ActiveMatrix Administrator CLI
      • Runtime Behavior
      • Sample
        • Incoming SOAP Messages
        • Outgoing SOAP Messages
      • Logging
    • Secure Communication Channels
      • Trust Stores
        • Creating a Trust Store Keystore
        • Configuring a Trust Store
      • Enabling Secure Communication Channels Using Command-Line Scripts
      • Installing Unlimited Jurisdiction Files
      • TIBCO Credential Service
    • Network Configuration
      • IPv6 Support
      • Port Usage
    • UDDI Servers
      • Registering an SSL-Enabled UDDI Server
      • Registering a UDDI Server
      • Setting the Default UDDI Server
      • Configuring SSL Communication
      • Publishing Services in a UDDI Server
      • Properties of Resource Templates
        • UDDI Server Reference
        • Application UDDI Publication Reference
    • Suspending or Unsuspending an Enterprise
      • States of an Enterprise
        • Suspended State
        • Unsuspended State
        • Read-only State
        • Write State
      • Enabling or Disabling the Suspend Activity
      • Build and Data Files
        • Targets and Attributes in Build File
        • enterprise_suspend_build.xml
        • enterprise_suspend_data.xml
      • Putting an Enterprise in a Suspended State
      • Putting an Enterprise in an Unsuspended State
      • Putting an Enterprise in a Read-only State
      • Putting an Enterprise in a Write State
      • Getting the Status of an Enterprise
      • Getting the Status of a Read-only Enterprise
      • Logging
      • Samples
        • Sample: Suspend
        • Sample: Unsuspend
        • Sample: Read-only State
        • Sample: Write State
        • Sample: Suspend When the Enterprise is in a Suspended State (failOnError Set to True)
        • Sample: Unsuspend When the Enterprise is in an Unsuspended State
        • Sample: Unsuspend When the Enterprise is in an Unsuspended State (failOnError Set to False)
        • Sample: Status of an Enterprise
        • Sample: Status of Read-only Enterprise
    • Single Sign-On to SOA Applications Using SAML SSO Web Profile
      • Using SAML Web Profile to Implement SSO
      • Configuring Identity Provider for SAML SSO
      • Creating and Installing a Resource Template and Resource Instance
      • SAML SSO Web Profile Authentication Resource Template
      • Applying the SAML SSO Web Profile Authentication Policy
      • Testing an Application That Uses SAML Authentication
      • Log Information Specific to SSO using SAML SSO Web Profile
    • Single Sign-On to SOA Applications using OpenID Connect
      • OpenID Connect in ActiveMatrix
      • Implementing OpenID Connect
        • Create a Web Application with an OpenID Policy
        • Registering an Application at an Identity Provider
        • Create a Resource Template of Type 'OpenIDAuthentication'
        • Deploy a Web Application with the OpenID Policy
        • Testing a Deployed Web Application that Uses OpenID
        • Troubleshooting OpenID Connect Issues
    • Troubleshooting
      • NodeUtil
        • Invoking the NodeUtil Utility
        • NodeUtil Commands
  • ActiveMatrix Administrator Web Service API Reference
  • Installation and Configuration
    • Important Information
    • TIBCO Documentation and Support Services
    • Setting Up an Enterprise
    • Installation Overview
    • Installation Requirements
      • Installation Account Requirements
      • Hardware Requirements
      • Software Requirements
      • Database Requirements for SPM
      • Installation Environment
      • Installation Profiles
    • Pre-installation
      • Configuring External Databases
        • Database Privileges Needed for Automatic Schema Creation
        • Database Privileges Needed for Manual Schema Creation
      • Configuring Ant
      • Configuring AIX Platforms
      • Configuring the Environment Settings for AIX Platforms Versions
      • Configuring the Maximum Number of Open Files on Linux Platforms
      • Downloading Software Assemblies if No Internet Access is Available
      • Installation and Configuration Checklist
    • Installing TIBCO ActiveMatrix Service Grid
      • Installing in GUI Mode
      • Installing in Console Mode
      • Installing in Silent Mode
      • Moving an Installation to a Destination Machine
      • Verifying Installation
        • TIBCO_HOME Files and Directories
    • Configuration
      • Configuration Setup and Overview
        • Networking
          • Default Ports
          • Secure Communication Channels
            • Keystores
            • Trust Stores
              • Creating a Trust Store Keystore
              • Configuring a Trust Store
          • IPv6 Support
        • TIBCO Configuration Tool Requirements
          • Enterprise Messaging Server Requirements
          • SSL Requirements
          • Configuring TIBCO Enterprise Message Service Servers for Non-Admin Users
          • Determining Whether an Enterprise Needs a Messaging Bus
        • Running TIBCO Configuration Tool
          • Running TIBCO Configuration Tool in GUI Mode
          • Running TIBCO Configuration Tool in Console Mode
          • Running TIBCO Configuration Tool in Silent Mode
        • Using TIBCO Configuration Tool Scripts and Property Files
          • Saving a TIBCO Configuration Tool Configuration
          • Reusing a TIBCO Configuration Tool Configuration
            • Configure Third-Party Driver Properties
            • Create TIBCO Host Instance Properties
            • Create ActiveMatrix Administrator Server Properties
          • Modifying Scripts from Earlier Releases
      • Configuration Tool Wizards and Screens
        • Create Express Developer Environment
          • Administrator Server Configuration Details
          • Administrator Server Notification and Messaging Bus Server
          • Summary
        • Create TIBCO ActiveMatrix Administrator Server
          • Administrator Server Configuration Details
          • Administrator Server TIBCO Host Configuration
          • Administrator Server Connection Settings
          • Administrator Server Internal HTTP Port
          • Administrator Server Notification and Messaging Bus Server
          • Administrator Server Enterprise Message Service Connection Factory
          • Administrator Server Database Details
          • Administrator Server Authentication Realm
          • Administrator Server Database Authentication Realm
          • Administrator Server LDAP Authentication Realm
          • Administrator Server TIBCO Credential Server Details
          • Administrator Server TIBCO Credential Server Keystore
          • Administrator Server Logging Notification Server
          • Administrator Server Log Service Database
          • Administrator Server Payload Service Database
          • Summary
        • Create TIBCO ActiveMatrix Policy Director Governance Administrator Server
          • TIBCO ActiveMatrix Policy Director Governance Administrator Server Selection
          • Administrator Server Configuration Details
          • Administrator Server TIBCO Host Configuration
          • Administrator Server Connection Settings
          • Administrator Server Connection Details
          • Administrator Server Internal HTTP Port
          • Administrator Server Notification and Messaging Bus Server
          • Administrator Server Enterprise Message Service Connection Factory
          • Administrator Server Database Details
          • Administrator Server Authentication Realm
          • Administrator Server Database Authentication Realm
          • Administrator Server LDAP Authentication Realm
          • Administrator Server TIBCO Credential Server Details
          • Administrator Server TIBCO Credential Server Keystore
          • Administrator Server Log Service Database
          • Administrator Server Payload Service Database
          • Proxy Management Services Configuration
          • Summary
        • Create TIBCO ActiveMatrix Policy Director Governance Proxy Host
          • TIBCO ActiveMatrix Policy Director Governance Proxy Host Creation Wizard
          • TIBCO Host Selection
          • TIBCO Host Instance
          • TIBCO Host Instance Notification Server
          • TIBCO Host Instance Administrator Server
          • Proxy Node Configuration
          • TIBCO ActiveMatrix Policy Director Governance Proxy Host Configuration Summary
        • Create TIBCO Host Instance
          • TIBCO Host Instance
          • TIBCO Host Instance Notification Server
          • TIBCO Host Instance Administrator Server
          • Summary
        • Configure Third-Party Driver
          • Third-Party Driver Details
          • Third-Party Driver JAR Folder
        • Edit ActiveMatrix Administrator Server Configuration
          • Edit Administrator Server Configuration
          • Administrator Server Connection Settings
          • Edit Administrator Server Database Details
            • Making Planned Database Configuration Changes
          • Edit Administrator Server Authentication Realm
          • Edit Server LDAP Authentication Realm
          • Summary
        • Replicate TIBCO ActiveMatrix Administrator Server
          • Configuring ActiveMatrix Policy Director Governance on Replicated Administrator Server
          • Remote Administrator Server Details
          • Create Replicated Instance Validation Info
          • Administrator Server Configuration Details
          • Administrator Server TIBCO Host Configuration
          • Administrator Server Connection Settings
          • Administrator Server Notification and Messaging Bus Server
          • Administration Server Database Details
          • Administrator Server Database Authentication Realm Details
          • Administrator Server Configuration LDAP Authentication Realm
          • Administrator Server Configuration Summary
          • Deleting an Administrator Server
        • Upgrade or Downgrade TIBCO ActiveMatrix
          • Upgrade or Downgrade
          • Upgrade Options
          • Upgrade Selection
          • Validate
          • Upgrade Summary
          • Downgrade Options
          • Downgrade Selection
          • ActiveMatrix Administrator Server
          • Downgrade Summary
        • Update JRE used by TIBCO ActiveMatrix
          • Select JRE Home
          • Summary
        • Configure TIBCO Service Performance Manager
          • TIBCO Service Performance Manager Configuration: Database Configuration
          • JMS Configuration
          • Threadpool Configuration
          • Server Configuration
          • Storage and Recovery Configuration
          • Action Configuration
          • Handle Configuration File
          • Summary Configuration
        • Generate TIBCO Service Performance Manager Database Schema
          • Summary Configuration
        • Configure TIBCO Service Performance Manager Dashboard
          • Generate Database Configuration
          • Database Configuration
          • JMS Configuration
          • Threadpool Configuration
          • Server Configuration
          • Storage And Recovery Configuration
          • Action Configuration
          • Handle Configuration File
          • Client API JMS Configuration
          • Client API Configuration
          • Dashboard Server Configuration
          • Dashboard Server Security Configuration
          • Dashboard Server Authentication LDAP Configuration
          • Tomcat Server Configuration
          • Dashboard Server Authentication File Configuration
          • Summary Configuration
      • DDL Script Generator
        • Overview of the DDL Script Generator Utility
        • Creating the Database Schema
        • Cleaning up the Database Schema
        • Database Models
        • DDLGeneratorTask
      • Configuring TIBCO Service Performance Manager Components
        • Setting EMS_HOME
        • Creating EMS Queues and Factories
        • Setting Properties for the SPM Dashboard
        • Configuring the SPM Dashboard Server to use the SPM Server
        • Configuring TIBCO Service Performance Manager Dashboard Server
        • Configuring the TIBCO Service Performance Manager Server
        • Generating the Database Schema and Starting the Database
        • Configuring TIBCO Service Performance Manager Service Probe
          • Service Probe Installation Prerequisites
          • Enabling the Service Probe on TIBCO ActiveMatrix Nodes
            • Enabling the Service Probe Using TIBCO ActiveMatrix Administrator UI
            • Enabling the Service Probe Using TIBCO ActiveMatrix Administrator CLI
          • Disabling the Service Probe on TIBCO ActiveMatrix Nodes
            • Disabling the Service Probe Using TIBCO ActiveMatrix Administrator UI
            • Disabling the Service Probe Using TIBCO ActiveMatrix Administrator CLI
          • Client Properties of TIBCO Service Performance Manager
        • Changing the Heap Size of the Server
        • Logging Configuration
          • SPM Server Logging Configuration
          • SPM Dashboard Logging Configuration
          • SPM Example Logging Configuration
    • Using the Service Performance Manager Components
      • Starting the TIBCO SPM Server
      • Starting the TIBCO SPM Dashboard
      • Samples
        • Running the Client API Application Example
        • Client Properties
        • Overriding the Default Property Values
      • Deployment Scenarios
        • TIBCO Enterprise Message Service Server Deployment
        • TIBCO Service Performance Manager Server Deployment
      • Improving the Performance
        • Data Retention Policies
    • Using TIBCO Business Studio
    • Upgrade and Downgrade
      • Prerequisites for Upgrading or Downgrading
      • Upgrade
        • Upgrading Runtime Hosts and Nodes
        • Post Upgrade Actions
          • Creating and Installing Resource Template, Resource Instance required for Service Health Check
        • Updating ActiveMatrix Administrator
        • Upgrading REST Binding Type
        • Upgrading TIBCO Service Performance Manager
        • Upgrading TIBCO ActiveMatrix Policy Director Governance
          • Supported ActiveMatrix Policy Director Governance Upgrade Scenarios
          • Upgrading TIBCO ActiveMatrix Policy Director Governance Installation in TIBCO ActiveMatrix Service Grid 3.3.x
          • Upgrading TIBCO ActiveMatrix Policy Director Governance Installation on TIBCO ActiveMatrix Service Grid 3.2.x
        • Verifying the Upgrade
          • Uninstalling MCR Dashboard Application
      • Downgrade
        • Downgrading Runtime Hosts and Nodes
        • Updating ActiveMatrix Administrator
        • Downgrading REST Binding Type
        • Verifying the Downgrade
      • Using TIBCO Configuration Tool (TCT) to Upgrade or Downgrade
        • Diagnostic Tests
          • Tests That Are Common to Upgrade and Downgrade
          • Additional Tests for Downgrade
        • Using GUI Mode
        • Using Console Mode
        • Using Silent Mode
        • Using Scripts
      • Upgrading and Downgrading: An Example
        • Instance Details
        • Upgrading Using TCT Wizard
          • Upgrading the ActiveMatrix Administrator Instance
          • Upgrading Runtime Hosts
          • Verifying Upgrade
          • Analyzing the Upgrade Logs
            • Start and Stop Action Logs
            • Upgrade Action Logs
            • Post Upgrade Action Logs
            • SystemNode Upgrade Logs
        • Downgrading Using TCT Wizard
          • Downgrading Runtime Hosts
          • Downgrading the ActiveMatrix Administrator Instance
          • Verifying Downgrade
          • Analyzing the Downgrade Logs
            • Start and Stop Action Logs
            • Downgrade Action Logs
            • SystemNode Downgrade Logs
          • Special Case Scenario on Handling REST BT after a Downgrade
            • Uninstalling TIBCO ActiveMatrix Service Grid in the GUI Mode
            • Deploying REST BT System and User Applications
    • Host Manager
      • Patch Commands
        • describeAvailablePatches
        • describeAppliedPatches
        • applyPatch
        • revertPatch
      • Engineering Build Commands
        • applyEB
        • revertEB
      • Host and Node Commands
        • startAllHosts
        • startAllNodes
        • stopAllHosts
        • stopAllNodes
        • updateManifest
        • describeHostUpgradeHistory
        • updateWindowsServices
      • Miscellaneous Commands
        • Common Arguments
        • clearLog
        • interactive
        • intro
        • version
        • viewLog
        • installInfo
    • Updating JRE Version
      • Approach
      • Properties Updated in CLASSPATH .tra Files
      • Invoking the Tool
      • Help Commands
      • Modes of Operation
      • Commands
      • Discover Mode
      • Update Mode
      • Reverting to the Previous Version of the JRE
      • Backup of Files
      • Logging
    • Troubleshooting
    • Uninstallation
      • Prerequisites for Uninstalling
      • Uninstalling in GUI Mode
      • Uninstalling in Console Mode
  • Security Guidelines
    • Important Information
    • TIBCO Documentation and Support Services
    • Introduction
    • Secure Communication Channels for Various Components
      • Enable Secure Communication Channels by Using Command-Line Scripts
    • Trust Stores
    • Unlimited Jurisdiction Files
      • Installing Unlimited Jurisdiction Files
    • TIBCO Credential Service
    • Other Recommendations for Running the ActiveMatrix Enterprise Securely
      • Passwords
      • Internal and External ActiveMatrix Administrator Communication
      • Disable OSGi Console When Not Required or Not in Use
  • Hawk ActiveMatrix Plug-in
    • Important Information
    • TIBCO Documentation and Support Services
    • TIBCO Hawk ActiveMatrix Plug-in Overview
    • ActiveMatrix Host Microagent and Service Microagent
      • Monitoring Architecture
      • ActiveMatrix Monitoring Service Application
    • Configurations
      • Configuration Prerequisites
      • Configuring Sample Rulebases
      • Configuring for Hawk 5.x
      • Configuring for Hawk 6.1
      • Configuring for TIBCO Enterprise Message Service
      • Configuring to Manage and Monitor Multiple TIBCO Host Instances in the Same Hawk Agent
      • Configuring Service Rulebase Samples
        • Rulebase Details
    • ActiveMatrix Host Microagent
      • isHostRunning
      • getHostInfo
      • getNodeInfo
      • onHostEvent
      • onNodeEvent
      • startNode
      • stopNode
    • Common Logging Event Publisher Microagent
      • startPublisher
      • stopPublisher
      • startAllPublishers
      • stopAllPublishers
      • getEventPublisherInfo
      • getEventDataSourceDetails
      • reloadEventDefinitions
      • Sample Event Definitions Configuration to CLEvents from Hawk
    • ActiveMatrix Service Microagent
      • getConfig
      • changeMonitoringConfig
      • getComponentInfo
      • getBindingInfo
      • onComponentEvent
      • onBindingEvent
      • getBindingOperationStats
      • getComponentOperationStats
      • onBindingOperationStats
      • onComponentOperationStats
      • Service Execution Stats
    • Configuration of TIBCO ActiveMatrix Hawk Rulebase Samples
      • Scenarios
        • Scenario A: When Tibco Host is Abnormally Shutdown
        • Scenario B: When Administrator Node is Abnormally Shutdown
        • Scenario C: Runtime Nodes Managed by connected AMX Host
    • Deploying and Testing Sample Application
      • Testing the Sample Application
  • Error Codes
    • Important Information
    • TIBCO Documentation and Support Services
    • Introduction
      • Error Codes Naming Convention
    • TIBCO ActiveMatrix Administrator Codes
      • Environment
    • Applications
      • Staging Area
      • Shared Resources
      • Application Fragments
      • Administrator Common
      • Tasks
      • Enterprise
      • Resource Template
      • Application Folder
      • Distributed Application Archive (DAA)
      • API Exceptions
      • RDA
      • Enterprise Archive (EAR) Loader
      • Notification Transport
      • Administrator Extensions
      • Debugger
      • Administrator Server
      • Host
      • Permissions
      • Resource Template Types
      • Axis2 Server
      • Resource Instances
      • Administrator Loggers
    • SOAP Binding Type Codes
      • SOAP JMS
      • SOAP HTTP
    • Component Framework Codes
      • XML Beans
      • JAXB
      • EMS
      • Data Binding
      • Runtime Proxies
      • Runtime Core
    • Host Platform Adapter (HPA) Codes
      • HPA Notifications
      • Administrator CLI - Bootstrap
    • Spring Implementation Type Codes
      • Spring Implementation Type
    • Shared Resource Codes
      • HTTP
      • JDBCXA
      • Threadpool
  • Policy Director Governance Custom Actions
    • Important Information
    • TIBCO Documentation and Support Services
    • Introduction to Custom Actions
    • Setting up the Eclipse Environment for Plug-in Development
    • Implementing a Custom Action
      • Packaging the Action for ActiveMatrix
      • Creating an ActiveMatrix Composite Wrapper for a Custom Action
    • Policy Templates
      • Creating an Action Template
      • Creating a Rule Template
    • User Interface
    • Deploying the Custom Policy
      • Deploying Policy Templates
      • Deploying User Interface
      • Restarting the System Node
      • Deploying the Action on ActiveMatrix
    • Debugging and Logging
      • Debugging and Logging ActiveMatrix Environment
    • Troubleshooting
    • Sample Action Source Code
    • Parameters and Action Templates
    • Sample Action Rule Templates and User Interface Files
    • Code Snippets
  • Service Performance Manager API Reference
    • Important Information
    • TIBCO Documentation and Support Services
    • Introduction
    • TIBCO Service Performance Manager API
    • Model Overview
      • RTASchema
      • Attributes and Facts
      • Dimension
      • Time Dimension
      • Dimension Hierarchy
      • Dimension Hierarchy Attributes
      • Cube
      • Measurement
      • Retention Policy
      • Additional Properties in the Schema
    • Publishing the Facts to the Server
    • Executing the Query
    • Setting up the Rules
    • The Runtime Model API
    • Creating Custom Metric Functions
      • Creating a Class with a Metric Function
      • Creating a Function Catalog
      • Binding the Metric Parameters to the Fact Attributes in the Schema
      • Make the Metric Function Available to the Product
      • Creating Custom Actions
        • Creating a Class that Extends AbstractActionHandlerContext
        • Creating a Class that Extends AbstractActionImpl
        • Creating an Action Catalog
        • Making the Custom Action Available to the Product
    • Java API Reference Pages