Responder Tab
You can configure the responder under this tab.
| Elements | Description | |
|---|---|---|
| TCP/IP Transfer Responder | IPv4 | MFT Platform Server for Windows responds to transfers using TCP/IP which are routed to the IP address of the system where MFT Platform Server is installed. Subordinate to that address is the port number.
The port number allows different applications to reside at the same IP address on the same machine, but makes them unique so they can co-exist. The default IP port number for MFT Platform Server is 46464, but you can change it to any number between 5000 and 65535, inclusive. However, some lower port numbers can be reserved for standard applications at your installation. Select the Disable check box to turn the regular TCP/IP port number off. |
| IPv4 | The port number on which SSL is listening. The default for the SSL IP port number for MFT Platform Server is 56565, but you can change it to any number between 5000 and 65535, inclusive. However, some lower port numbers can be reserved for standard applications at your installation. | |
| Responder Listen Adapter IP Addresses
If a machine has more than one IP address, you can bind the connection to a particular one. The default value for this parameter is ALL, which means binding to any IP Address. If this parameter is defined, the Responder accepts incoming requests from only this IP address. You can specify Adapter IP Addresses for IPV4 and IPV6 for incoming requests. Initiator Listen Adapter IP Addresses If a machine has more than one IP address, you can bind the connection to a particular one. All initiator connections go through this particular IP Address. The default value for this parameter is ALL, which means binding to any IP Address. You can specify Adapter IP Addresses for IPV4 and IPV6 for incoming requests. |
||
| Default Class of Service: Allows you to select a Class of Service from the drop down box. Nodes | Responder Profile | Defines a local username and password used in place of the incoming username and password. By using responder profiles, a remote MFT Platform Server installation does not have to know an actual username and password on your local machine to initiate a transfer. |
| Access Control | Configuration | Sends a file to the Windows platform and it automatically goes to a pre-defined directory based on user-defined criteria. The default file name for the Access Control configuration is AccessControl.cfg. Please refer to the section on Access Control for more information. This is used by the MFT Platform Server Responder only. |
| CFAlias | Configuration | Sends a file to the Windows platform and it automatically goes to a pre-defined directory based on user-defined criteria. The default file name for the CFAlias configuration is CfAlias.cfg. Please refer to the section on CfAlias for more information. This is used by the MFT Platform Server Responder only. |