| AllPartInfo
|
All information for part needed for scrollsheet. Return value: Double(). This property is read only.
|
| AllRunsTestOutputforRChart
|
Retrieve current values of All Runs Test Output for R Chart. Return value: Integer(). This property is read only.
|
| AllRunsTestOutputforS2Chart
|
Retrieve current values of All Runs Test Output for S2 Chart. Return value: Integer(). This property is read only.
|
| AllRunsTestOutputforSChart
|
Retrieve current values of All Runs Test Output for S Chart. Return value: Integer(). This property is read only.
|
| AllRunsTestOutputforXbarChart
|
Retrieve current values of All Runs Test Output for Xbar Chart. Return value: Integer(). This property is read only.
|
| AllSampleSizeOne
|
Is all sample size one. Return value: Integer. This property is read only.
|
| AllSamplesAreNew
|
Treat all samples as new samples on update. Assignment value: Boolean.
|
| AllValuesOfProcessCapability
|
Retrieve current values of All Values Of Process Capability. Return value: Double(). This property is read only.
|
| AllValuesOfProcessCapabilityNonNormal
|
Retrieve current values of All Values Of Process Capability; non-normal indices. Return value: Double(). This property is read only.
|
| AllValuesOfProcessPerformance
|
Retrieve current values of All Values Of Process Performance. Return value: Double(). This property is read only.
|
| AnySampleSizeOne
|
Is any sample size one. Return value: Integer. This property is read only.
|
| ApplyAlarmOptions
|
Apply Alarm Options. Return/assignment value: Integer.
|
| AutomaticCreationOfChartForObservationOutOfSpecificationAlarm
|
Automatic Creation Of Chart For Observation Out Of Specification Alarm. Return/assignment value: Boolean.
|
| AutomaticCreationOfChartForRunsTestViolationAlarm
|
Automatic Creation Of Chart For Runs Test Violation Alarm. Return/assignment value: Boolean.
|
| AutomaticCreationOfChartForSampleOutOfControlAlarm
|
Automatic Creation Of Chart For Sample Out Of Control Alarm. Return/assignment value: Boolean.
|
| AutomaticCreationOfChartForSampleOutOfWarningAlarm
|
Automatic Creation Of Chart For Sample Out Of Warning Alarm. Return/assignment value: Boolean.
|
| AutomaticRequestOfActionInputForObservationOutOfSpecificationAlarm
|
Automatic Request Of Action Input For Observation Out Of Specification Alarm. Return/assignment value: Boolean.
|
| AutomaticRequestOfActionInputForRunsTestViolationAlarm
|
Automatic Request Of Action Input For Runs Test Violation Alarm. Return/assignment value: Boolean.
|
| AutomaticRequestOfActionInputForSampleOutOfControlAlarm
|
Automatic Request Of Action Input For Sample Out Of Control Alarm. Return/assignment value: Boolean.
|
| AutomaticRequestOfActionInputForSampleOutOfWarningAlarm
|
Automatic Request Of Action Input For Sample OutOf Warning Alarm. Return/assignment value: Boolean.
|
| AutomaticRequestOfCauseInputForObservationOutOfSpecificationAlarm
|
Automatic Request Of Cause Input For Observation Out Of Specification Alarm. Return/assignment value: Boolean.
|
| AutomaticRequestOfCauseInputForRunsTestViolationAlarm
|
Automatic Request Of Cause Input For Runs Test Violation Alarm. Return/assignment value: Boolean.
|
| AutomaticRequestOfCauseInputForSampleOutOfControlAlarm
|
Automatic Request Of Cause Input For Sample Out Of Control Alarm. Return/assignment value: Boolean.
|
| AutomaticRequestOfCauseInputForSampleOutOfWarningAlarm
|
Automatic Request Of Cause Input For Sample Out Of Warning Alarm. Return/assignment value: Boolean.
|
| CaseWeight
|
Gets/sets the case weights. Return/assignment value: Object.
|
| CenterLineValue
|
Current value of X-Bar center line value. Return/assignment value: Double.
|
| CenterLineValueForVarChart
|
Current value of center line for chart of variability (e.g., R-bar, S-bar); setting this parameter will also change the value of Sigma. Return/assignment value: Double.
|
| ChartInfoAverageRange
|
Retrieve current values of Chart Info Average Range. Return value: Double. This property is read only.
|
| ChartInfoAverageStDv
|
Retrieve current values of Chart Info Average Standard Deviation. Return value: Double. This property is read only.
|
| ChartInfoSigma
|
Retrieve current values of Chart Info Sigma; S-chart. Return value: Double. This property is read only.
|
| ChartInfoSigmaForAverageRange
|
Retrieve current values of Chart Info SigmaForAverageRange. Return value: Double. This property is read only.
|
| ChartInfoSigmaForAverageS
|
Retrieve current values of Chart Info Sigma; R-chart. Return value: Double. This property is read only.
|
| ChartInfoXbar
|
Retrieve current values of Chart Info Xbar. Return value: Double. This property is read only.
|
| ChartTitle
|
Set/retrieve chart title. Return/assignment value: String.
|
| CodeForApplicationSet
|
Code of Variable number for application set. Return value: Integer. This property is read only.
|
| CodeForComputationSet
|
Code of Variable number for computation set. Return value: Integer. This property is read only.
|
| CodeForExclusionFromComputations
|
Code For Exclusion From Computations. Return/assignment value: Integer.
|
| CodeForExclusionFromComputationsAndGraphs
|
Code For Exclusion From Computations And Graphs. Return/assignment value: Integer.
|
| CodeInActionCodeTable
|
Return/assignment value: Integer.
|
| CodeInCauseCodeTable
|
Return/assignment value: Integer.
|
| CodeInCommentCodeTable
|
Return/assignment value: Integer.
|
| CodeInInclusionCodeTable
|
Return/assignment value: Integer.
|
| CodeInIndividualCodeTable
|
Return/assignment value: Integer.
|
| CommandLineForObservationOutOfSpecificationAlarm
|
Command Line For Observation Out Of Specification Alarm. Return/assignment value: String.
|
| CommandLineForRunsTestViolationAlarm
|
Command Line For Runs Test Violation Alarm. Return/assignment value: String.
|
| CommandLineForSampleOutOfControlAlarm
|
Command Line For Sample Out Of Control Alarm. Return/assignment value: String.
|
| CommandLineForSampleOutOfWarningAlarm
|
Command Line For Sample Out Of Warning Alarm. Return/assignment value: String.
|
| ComputeLowerPercentileValue
|
Compute normal distribution based lower percentile value (for non-normal process capability indices). Return value: Double. This property is read only.
|
| ComputeMedianPercentileValue
|
Compute normal distribution based median percentile value (for non-normal process capability indices). Return value: Double. This property is read only.
|
| ComputeMovingAverageLine
|
Compute moving average line, and include in chart. Return/assignment value: Boolean.
|
| ComputeRunsTestsForRChart
|
Return/assignment value: Boolean.
|
| ComputeUpperPercentileValue
|
Compute normal distribution based upper percentile value (for non-normal process capability indices). Return value: Double. This property is read only.
|
| ComputeWarningLimits
|
Compute warning limits, and include in chart. Return/assignment value: Boolean.
|
| ComputeWarningLimitsForVarChart
|
Compute warning limits in variability chart (e.g., R, S), and include in chart. Return/assignment value: Boolean.
|
| ComputedAverageN
|
Retrieve computed value of average sample n, for optional set. Return value: Double. This property is read only.
|
| ComputedAverageRange
|
Retrieve computed average range, for optional (computation) set. Return value: Double. This property is read only.
|
| ComputedAverageStandardDeviation
|
Retrieve computed average standard deviation, for optional set. Return value: Double. This property is read only.
|
| ComputedMean
|
Retrieve computed mean, for optional set. Return value: Double. This property is read only.
|
| ComputedSigma
|
Computed value of sigma, for a (computation) set. Return value: Double. This property is read only.
|
| ComputedSigmaForAverageRange
|
Retrieve current values of computed sigma for average range. Return value: Double. This property is read only.
|
| ComputedSigmaForAverageS
|
Retrieve current values of computed sigma for average standard deviation. Return value: Double. This property is read only.
|
| ComputedSigmaForMean
|
Computed sigma for mean, for a (computation) set. Return value: Double. This property is read only.
|
| ConstantControlLimitValueLCL
|
Constant value for lower control limit (LCL). Return/assignment value: Double.
|
| ConstantControlLimitValueLCLForVarChart
|
Constant value for lower control limit (LCL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| ConstantControlLimitValueUCL
|
Constant value for upper control limit (UCL). Return/assignment value: Double.
|
| ConstantControlLimitValueUCLForVarChart
|
Constant value for upper control limit (UCL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| ConstantMultiplierForControlLimitsLCL
|
Constant multiplier; for lower control limits (LCL). Return/assignment value: Double.
|
| ConstantMultiplierForControlLimitsLCLForVarChart
|
Constant multiplier; for lower control limits (LCL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| ConstantMultiplierForControlLimitsUCL
|
Constant multiplier; for upper control limits (UCL). Return/assignment value: Double.
|
| ConstantMultiplierForControlLimitsUCLForVarChart
|
Constant multiplier; for upper control limits (UCL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| ConstantMultiplierForWarningLinesLWL
|
Constant multiplier; for lower warning limits (LWL). Return/assignment value: Double.
|
| ConstantMultiplierForWarningLinesLWLForVarChart
|
Constant multiplier; for lower warning limits (LWL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| ConstantMultiplierForWarningLinesUWL
|
Constant multiplier; for upper warning limits (UWL). Return/assignment value: Double.
|
| ConstantMultiplierForWarningLinesUWLForVarChart
|
Constant multiplier; for upper warning limits (UWL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| ConstantWarningLimitValueLWL
|
Constant value for lower warning limit (LWL). Return/assignment value: Double.
|
| ConstantWarningLimitValueLWLForVarChart
|
Constant value for lower warning limit (LWL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| ConstantWarningLimitValueUWL
|
Constant value for upper warning limit (UWL). Return/assignment value: Double.
|
| ConstantWarningLimitValueUWLForVarChart
|
Constant value for upper warning limit (UWL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| ControlLimitORWarningLimit
|
Gets control or warning limits in case of no sample. Return value: Double. This property is read only.
|
| CreateASet
|
Create a set with data and return status. Return value: Integer. This property is read only.
|
| CurrentChartIsValid
|
Logical variable; if FALSE the current chart object is no longer valid (fatal error has occurred). Return value: Boolean. This property is read only.
|
| DescriptiveInfoForParetoChart
|
Retrieve current values of Descriptive info for Pareto-Chart. Return value: Double(). This property is read only.
|
| DescriptiveInfoForRChart
|
Retrieve current values of Descriptive info for R-Chart. Return value: Double(). This property is read only.
|
| DescriptiveInfoForRChartForOneSet
|
Retrieve current values of Descriptive info for R-Chart, for one specific set. Return value: Double(). This property is read only.
|
| DescriptiveInfoForXbarChart
|
Retrieve current values of Descriptive info for Xbar-Chart. Return value: Double(). This property is read only.
|
| DescriptiveInfoForXbarChartForOneSet
|
Retrieve current values of Descriptive info for Xbar-Chart, for one specific set. Return value: Double(). This property is read only.
|
| DescriptiveInfoForXbarChartNonNormal
|
Retrieve current values of Descriptive info for Non-Normal Xbar-Chart. Return value: Double(). This property is read only.
|
| DescriptiveInfoForXbarChartNonNormalForOneSet
|
Retrieve current values of Descriptive info for Non-Normal Xbar-Chart, for one specific set. Return value: Double(). This property is read only.
|
| DisableAlarms
|
Enables/Disables firing of IQCVChartsEvents. Return/assignment value: Boolean.
|
| DoNotShowLCLR
|
Do not display lower control limit for R Chart. Return/assignment value: Integer.
|
| DoNotShowLCLX
|
Do not display lower control limit for X Chart. Return/assignment value: Integer.
|
| DoNotShowLWLR
|
Do not display lower warning limit for R Chart. Return/assignment value: Integer.
|
| DoNotShowLWLX
|
Do not display lower warning limit for X Chart. Return/assignment value: Integer.
|
| DoNotShowUCLR
|
Do not display upper control limit for R Chart. Return/assignment value: Integer.
|
| DoNotShowUCLX
|
Do not display upper control limit for X Chart. Return/assignment value: Integer.
|
| DoNotShowUWLR
|
Do not display upper warning limit for R Chart. Return/assignment value: Integer.
|
| DoNotShowUWLX
|
Do not display upper warning limit for X Chart. Return/assignment value: Integer.
|
| EndSampleForApplicationSet
|
Ending sample number for application set. Return value: Integer. This property is read only.
|
| EndSampleForComputationSet
|
Ending sample number for computation set. Return value: Integer. This property is read only.
|
| ExecuteCommandLineForObservationOutOfSpecificationAlarm
|
Execute Command Line For Observation Out Of Specification Alarm. Return/assignment value: Boolean.
|
| ExecuteCommandLineForRunsTestViolationAlarm
|
Execute Command Line For Runs Test Violation Alarm. Return/assignment value: Boolean.
|
| ExecuteCommandLineForSampleOutOfControlAlarm
|
Execute Command Line For Sample Out Of Control Alarm. Return/assignment value: Boolean.
|
| ExecuteCommandLineForSampleOutOfWarningAlarm
|
Execute Command Line For Sample Out Of Warning Alarm. Return/assignment value: Boolean.
|
| ExecuteSVBFilesForObservationOutOfSpecificationAlarm
|
Execute SVB Files For Observation Out Of Specification Alarm. Return/assignment value: Boolean.
|
| ExecuteSVBFilesForRunsTestViolationAlarm
|
Execute SVB Files For Runs Test Violation Alarm. Return/assignment value: Boolean.
|
| ExecuteSVBFilesForSampleOutOfControlAlarm
|
Execute SVB Files For Sample Out Of Control Alarm. Return/assignment value: Boolean.
|
| ExecuteSVBFilesForSampleOutOfWarningAlarm
|
Execute SVB Files For Sample Out Of Warning Alarm. Return/assignment value: Boolean.
|
| FixedNumberOfSamplesPerPart
|
If it is fixed n per part. Return value: Integer. This property is read only.
|
| IndexOfOutOfSamplesForV
|
Index of out-of-control samples for R, S, V-square chart. Return value: Integer(). This property is read only.
|
| IndexOfOutOfSamplesForXbar
|
Index of out-of-control samples for X-bar chart. Return value: Integer(). This property is read only.
|
| InfoForSetsFromVariables
|
Put information on Sets from variables. Assignment value: Integer().
|
| IniFileNameStoringViolationsForAlarm
|
Ini File Name Storing Violations For Alarm. Return/assignment value: String.
|
| InputForAChartAreCounts
|
Input data for attribute charts are counts. Return value: Boolean. This property is read only.
|
| IsFixedNumberOfSamplesPerPart
|
If it is fixed n per part. Return value: Integer. This property is read only.
|
| IsThisANewSample
|
Is the respective sample a 'new sample' i.e., added in the last update (data reading). Return value: Boolean. This property is read only.
|
| IsUniqueApplicationSet
|
Is this future set unique? Return value: Integer. This property is read only.
|
| IsVariableNameAlreadyInUse
|
This property returns an enumerated constant (>0) if a particular input variable (name) is already in use for some other purpose in the context of this chart. Return value:
IQCTypeOfVariableInChart. This property is read only.
|
| IsVariableNumberAlreadyInUse
|
This property returns an enumerated constant (>0) if a particular input variable (field number, referenced from 1) is already in use for some other purpose in the context of this chart. Return value:
IQCTypeOfVariableInChart. This property is read only.
|
| KurtosisValue
|
Retrieve current value of Kurtosis for non-normal chart computations. Return value: Double. This property is read only.
|
| LabelValueForCreatingNewSet
|
Label value for creating new set. Assignment value: String.
|
| LambdaForMovingAverage
|
Lambda for exponentially weighted moving average line. Return/assignment value: Double.
|
| LogINIFileForAlarm
|
Log INI File For Alarm. Return/assignment value: Boolean.
|
| LongNameInActionCodeTable
|
Return/assignment value: String.
|
| LongNameInCauseCodeTable
|
Return/assignment value: String.
|
| LongNameInCommentCodeTable
|
Return/assignment value: String.
|
| LongNameInInclusionCodeTable
|
Return/assignment value: String.
|
| LongNameInIndividualCodeTable
|
Return/assignment value: String.
|
| MaximumPForProbabilityLimits
|
Retrieve maximum probability value for probability-based control and warning limits. Return value: Double. This property is read only.
|
| MaximumValueForCenterLineForVarChart
|
Retrieve maximum valid value for center line value; R, S, and S-square chart. Return value: Double. This property is read only.
|
| MaximumValueForCenterLineXBar
|
Retrieve maximum valid value for center line value; X-bar chart. Return value: Double. This property is read only.
|
| MaximumValueForConstantMultiplier
|
Retrieve maximum value for constant multiplier for control and warning limits. Return value: Double. This property is read only.
|
| MaximumValueForSigma
|
Retrieve maximum valid value for sigma. Return value: Double. This property is read only.
|
| MaximumValueOfUpperControlLimitForVarChart
|
Retrieve maximum valid value for upper control (warning) limit; R, S, and S-square chart. Return value: Double. This property is read only.
|
| MaximumValueOfUpperControlLimitXBar
|
Retrieve maximum valid value for upper control (warning) limit; X-bar chart. Return value: Double. This property is read only.
|
| MinimumPForProbabilityLimits
|
Retrieve minimum probability value for probability-based control and warning limits. Return value: Double. This property is read only.
|
| MinimumValueForCenterLineForVarChart
|
Retrieve minimum valid value for center line value; R, S, and S-square chart. Return value: Double. This property is read only.
|
| MinimumValueForCenterLineXBar
|
Retrieve minimum valid value for center line value; X-bar chart. Return value: Double. This property is read only.
|
| MinimumValueForConstantMultiplier
|
Retrieve minimum value for constant multiplier for control and warning limits. Return value: Double. This property is read only.
|
| MinimumValueForSigma
|
Retrieve minimum valid value for sigma. Return value: Double. This property is read only.
|
| MinimumValueOfLowerControlLimitForVarChart
|
Retrieve minimum valid value for lower control (warning) limit; R, S, and S-square chart. Return value: Double. This property is read only.
|
| MinimumValueOfLowerControlLimitXBar
|
Retrieve minimum valid value for lower control (warning) limit; X-bar chart. Return value: Double. This property is read only.
|
| MovingAverages
|
Retrieve current values of moving averages. Return value: Double(). This property is read only.
|
| MovingWindow
|
Moving window. Return/assignment value: Integer.
|
| NPointForMovingAverage
|
Number of lags for moving average line. Return/assignment value: Integer.
|
| NameOfSampleIdendifierVariable
|
Return field name of variable with sample identifier codes. Return value: String. This property is read only.
|
| NameOfVariableToPlot
|
Return field name of variable to chart. Return value: String. This property is read only.
|
| NameOfVariableWithActions
|
Return field name of variable with names/codes for actions. Return value: String. This property is read only.
|
| NameOfVariableWithCauses
|
Return field name of variable with names/codes for causes. Return value: String. This property is read only.
|
| NameOfVariableWithComments
|
Return field name of variable with names/codes for comments. Return value: String. This property is read only.
|
| NameOfVariableWithInclusions
|
Return field name of variable with names/codes for inclusion/exclusion. Return value: String. This property is read only.
|
| NameOfVariableWithParetoCodes
|
Return field name of variable with Codes for Pareto chart. Return value: String. This property is read only.
|
| NameOfVariableWithParetoCounts
|
Return field name of variable with Counts for Pareto chart. Return value: String. This property is read only.
|
| NameOfVariableWithSampleVariability
|
Return field name of variable with variability measure (for variable control charts from aggregated data). Return value: String. This property is read only.
|
| NewSamples
|
Put new sample data. Assignment value: Double().
|
| NominalIsDefined
|
Return/assignment value: Integer.
|
| NonNormalFitForCapabilityHistogram
|
Retrieve k number of fitted points for nonnormal chart of raw observations (for Process Capability chart), from XMin through XMax, for set ISet. Return value: Double(). This property is read only.
|
| NonNormalFitForXBarChart
|
Retrieve k number of fitted points for nonnormal X-bar chart, from XMin through XMax, for set ISet. Return value: Double(). This property is read only.
|
| NonNormalSigmaLimitLower
|
Compute equivalent non-normal based lower sigma limit values (for non-normal process capability histogram), for a set. Return value: Double. This property is read only.
|
| NonNormalSigmaLimitUpper
|
Compute equivalent non-normal based upper sigma limit values (for non-normal process capability histogram), for a set. Return value: Double. This property is read only.
|
| NormalFitEquation
|
Retrieve normal fit equation for means (to be shown in histogram), for optional set. Return value: String. This property is read only.
|
| NumberOfCasesOutOfProcessSpec
|
Number Of Cases Out Of Process Spec. Return value: Integer. This property is read only.
|
| NumberOfDigitsInDisplayedValues
|
Number of digits to use when displaying values of means, sigma, etc.; 4 <= N Digits <= 12. Return/assignment value: Integer.
|
| NumberOfParts
|
Number of parts. Return value: Integer. This property is read only.
|
| NumberOfRowsInActionCodeTable
|
Number of rows in Action code table. Return value: Integer. This property is read only.
|
| NumberOfRowsInCauseCodeTable
|
Number of rows in Cause code table. Return value: Integer. This property is read only.
|
| NumberOfRowsInCommentCodeTable
|
Number of rows in Comment code table. Return value: Integer. This property is read only.
|
| NumberOfRowsInInclusionCodeTable
|
Number of rows in Inclusion code table. Return value: Integer. This property is read only.
|
| NumberOfRowsInIndividualCodeTable
|
Number of rows in Individual code table. Return value: Integer. This property is read only.
|
| NumberOfSamples
|
Retrieve current number of samples, for optional computation set. Return value: Integer. This property is read only.
|
| NumberOfSamplesInApplicationSet
|
Retrieve current number of samples in an application set. Return value: Integer. This property is read only.
|
| NumberOfSets
|
Retrieve current number of sets of samples. Return value: Integer. This property is read only.
|
| NumberOfViolationsKeptInINIFileForAlarm
|
Number Of Violations Kept In INI File For Alarm. Return/assignment value: Integer.
|
| ObservedMeanForApplicationSet
|
Observed mean for application set number. Return value: Double. This property is read only.
|
| OutliersInfoForRChart
|
Retrieve current values of outlier info for R-chart. Return value: Double(). This property is read only.
|
| OutliersInfoForXbarChart
|
Retrieve current values of outlier info for Xbar-chart. Return value: Double(). This property is read only.
|
| OutliersInfoForXbarChartNonNormal
|
Retrieve current values of outlier info for X-bar chart, non-normal control limits. Return value: Double(). This property is read only.
|
| OverallNumberOfValidSamples
|
Retrieve current overall number of valid samples (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Integer. This property is read only.
|
| OverallObservedAverageSampleSizeForValidSamples
|
Retrieve current overall average sample size (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedKurtosisForValidSamples
|
Retrieve current overall kurtosis (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedMaximumForValidSamples
|
Retrieve current overall maximum value (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedMaximumMeanForValidSamples
|
Retrieve current overall maximum mean (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedMaximumSRForValidSamples
|
Retrieve current overall maximum value for variability chart (R, S, etc.; all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedMeanForValidSamples
|
Retrieve current overall mean (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedMinimumForValidSamples
|
Retrieve current overall minimum value (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedMinimumMeanForValidSamples
|
Retrieve current overall minimum mean (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedMinimumSRForValidSamples
|
Retrieve current overall minimum value for variability chart (R, S, etc.; all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedSigmaForValidSamples
|
Retrieve current overall Sigma (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedSkewnessForValidSamples
|
Retrieve current overall skewness (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedStDvForValidSamples
|
Retrieve current overall standard deviation (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Double. This property is read only.
|
| OverallObservedTotalNForValidSamples
|
Retrieve current total number of cases (all sets and parts, after brushing, i.e., ignoring deselected points). Return value: Integer. This property is read only.
|
| OverallStdDv
|
Retrieve current values of overall StdDv. Return value: Double. This property is read only.
|
| PValueForControlLimitsLCL
|
P-value for probability based upper control limits (UCL). Return/assignment value: Double.
|
| PValueForControlLimitsLCLForVarChart
|
P-value for probability based lower control limits (LCL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| PValueForControlLimitsUCL
|
P-value for probability based control limits. Return/assignment value: Double.
|
| PValueForControlLimitsUCLForVarChart
|
P-value for probability based upper control limits (UCL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| PValueForWarningLinesLWL
|
P-value for probability based lower warning limits (LWL). Return/assignment value: Double.
|
| PValueForWarningLinesLWLForVarChart
|
P-value for probability based lower warning limits (LWL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| PValueForWarningLinesUWL
|
P-value for probability based upper warning limits (UWL). Return/assignment value: Double.
|
| PValueForWarningLinesUWLForVarChart
|
P-value for probability based upper warning limits (UWL) for variability chart (e.g., R, S). Return/assignment value: Double.
|
| PartID
|
Part ID. Return value: Double. This property is read only.
|
| PartMean
|
Part Mean. Return value: Double. This property is read only.
|
| PartMedian
|
Part Median. Return value: Double. This property is read only.
|
| PartN
|
Part N. Return value: Double. This property is read only.
|
| PartName
|
Part name. Return value: String. This property is read only.
|
| PartNameFromSampleNumber
|
Retrieve part name for a sample number. Return value: String. This property is read only.
|
| PartNominalValue
|
Nominal value for a part. Return/assignment value: Double.
|
| PartNumberOfSamples
|
Number of samples in a part. Return value: Double. This property is read only.
|
| PartRange
|
Part Range. Return value: Double. This property is read only.
|
| PartSigma
|
Part Sigma. Return value: Double. This property is read only.
|
| PartStdDv
|
Part StdDv. Return value: Double. This property is read only.
|
| PartVariationValue
|
Variation value for a part. Return/assignment value: Double.
|
| ProcessDelta
|
Return/assignment value: Double.
|
| ProcessLSL
|
Return/assignment value: Double.
|
| ProcessNominal
|
Return/assignment value: Double.
|
| ProcessSigmaLimit
|
Return/assignment value: Double.
|
| ProcessTypeOfSpec
|
Type of process capability specifications. Return/assignment value:
IQCTypeOfProcessCapabilitySpecs.
|
| ProcessUSL
|
Return/assignment value: Double.
|
| QualityControlFunction_c4
|
C4(n) function (for computation of center line for S charts). Return value: Double. This property is read only.
|
| QualityControlFunction_d2
|
D2(n) function (for computation of center line for R charts). Return value: Double. This property is read only.
|
| QualityControlFunction_d3
|
D3(n) function (for computation of control limits for R charts). Return value: Double. This property is read only.
|
| RawData
|
Retrieve current values of Raw data. Return value: Double(). This property is read only.
|
| RememberLastKViolationsInINIFileForAlarm
|
Remember Last K Violations In INI File For Alarm. Return/assignment value: Boolean.
|
| RetrieveAverageLimitsForASet
|
Retrieve current values of All Values Of Process Capability. Return value: Double(). This property is read only.
|
| RunsTestFirstParamIn1
|
Return/assignment value: Integer.
|
| RunsTestFirstParamIn2
|
Return/assignment value: Integer.
|
| RunsTestFirstParamIn3
|
Return/assignment value: Integer.
|
| RunsTestFirstParamIn4
|
Return/assignment value: Integer.
|
| RunsTestFirstParamIn5
|
Return/assignment value: Integer.
|
| RunsTestFirstParamIn6
|
Return/assignment value: Integer.
|
| RunsTestFirstParamIn7
|
Return/assignment value: Integer.
|
| RunsTestIs1
|
Return/assignment value: Boolean.
|
| RunsTestIs2
|
Return/assignment value: Boolean.
|
| RunsTestIs3
|
Return/assignment value: Boolean.
|
| RunsTestIs4
|
Return/assignment value: Boolean.
|
| RunsTestIs5
|
Return/assignment value: Boolean.
|
| RunsTestIs6
|
Return/assignment value: Boolean.
|
| RunsTestIs7
|
Return/assignment value: Boolean.
|
| RunsTestIsOverlaping
|
Return/assignment value: Boolean.
|
| RunsTestSecondParamIn4
|
Return/assignment value: Integer.
|
| RunsTestSecondParamIn5
|
Return/assignment value: Integer.
|
| RunsTestSetCurrentSpecAsDefault
|
Return/assignment value: Boolean.
|
| RunsTestZoneA
|
Return/assignment value: Double.
|
| RunsTestZoneB
|
Return/assignment value: Double.
|
| RunsTestZoneC
|
Return/assignment value: Double.
|
| SVBFilesForObservationOutOfSpecificationAlarm
|
SVB Files For Observation Out Of Specification Alarm. Return/assignment value: String.
|
| SVBFilesForRunsTestViolationAlarm
|
SVB Files For Runs Test Violation Alarm. Return/assignment value: String.
|
| SVBFilesForSampleOutOfControlAlarm
|
SVB Files For Sample Out Of Control Alarm. Return/assignment value: String.
|
| SVBFilesForSampleOutOfWarningAlarm
|
SVB Files For Sample Out Of Warning Alarm. Return/assignment value: String.
|
| SampleActionName
|
Name of sample Action name. Return value: String. This property is read only.
|
| SampleActionType
|
Sample ActionType. Return/assignment value: Integer.
|
| SampleCauseName
|
Name of sample Cause name. Return value: String. This property is read only.
|
| SampleCauseType
|
Sample CauseType. Return/assignment value: Integer.
|
| SampleCenters
|
Retrieve current values of centers. Return value: Double(). This property is read only.
|
| SampleCentersForVarChart
|
Retrieve current values of center for var chart. Return value: Double(). This property is read only.
|
| SampleCommentName
|
Name of sample Comment name. Return value: String. This property is read only.
|
| SampleCommentType
|
Sample CommentType. Return/assignment value: Integer.
|
| SampleHasAction
|
Returns TRUE if an Action is defined for ('attached to') this sample (referenced from 0). Return value: Boolean. This property is read only.
|
| SampleHasCause
|
Returns TRUE if a Cause is defined for ('attached to') this sample (referenced from 0). Return value: Boolean. This property is read only.
|
| SampleHasComment
|
Returns TRUE if a Comment is defined for ('attached to') this sample (referenced from 0). Return value: Boolean. This property is read only.
|
| SampleID
|
Retrieve current values of Sample Info ID (first case id). Return value: Double. This property is read only.
|
| SampleIDs
|
Retrieve current values of Sample Info IDs. Return value: Double(). This property is read only.
|
| SampleInclusionType
|
Sample InclusionType. Return/assignment value: Integer.
|
| SampleIndex
|
Retrieve current values of Sample Info ID (first case id). Return value: Double. This property is read only.
|
| SampleIndividualType
|
Sample IndividualType. Return/assignment value: Integer.
|
| SampleLCL
|
Retrieve sample LCL. Return value: Double. This property is read only.
|
| SampleLCLV
|
Retrieve sample LCL for V chart. Return value: Double. This property is read only.
|
| SampleLCLs
|
Retrieve current values of Sample Info LCLs. Return value: Double(). This property is read only.
|
| SampleLWL
|
Retrieve sample LWL. Return value: Double. This property is read only.
|
| SampleLWLV
|
Retrieve sample LWL for V chart. Return value: Double. This property is read only.
|
| SampleLWLs
|
Retrieve current values of Sample Info LWLs. Return value: Double(). This property is read only.
|
| SampleLWLsForVarChart
|
Retrieve current values of LWLs for var chart. Return value: Double(). This property is read only.
|
| SampleMaximums
|
Retrieve current values of Sample Info Maximums. Return value: Double(). This property is read only.
|
| SampleMeans
|
Retrieve current values of Sample Info Means. Return value: Double(). This property is read only.
|
| SampleMedians
|
Retrieve current values of Sample Info Medians. Return value: Double(). This property is read only.
|
| SampleMinimums
|
Retrieve current values of Sample Info Minimums. Return value: Double(). This property is read only.
|
| SampleName
|
Name of sample. Return/assignment value: String.
|
| SampleNames
|
Retrieve current names of samples. Return value: String(). This property is read only.
|
| SampleNofcs
|
Retrieve current values of Sample Info Nofcs. Return value: Integer(). This property is read only.
|
| SampleNs
|
Retrieve current values of Sample Info Ns. Return value: Double(). This property is read only.
|
| SampleNumber
|
Retrieve sequential sample number (from 0) for a sample name and optional part name. Return value: Integer. This property is read only.
|
| SamplePartIDs
|
Retrieve current values of Sample Info PartIDs. Return value: Double(). This property is read only.
|
| SamplePoint
|
Retrieve sample plot point. Return value: Double. This property is read only.
|
| SamplePointForVChart
|
Retrieve sample plot point for v chart. Return value: Double. This property is read only.
|
| SampleRanges
|
Retrieve current values of Sample Info Ranges. Return value: Double(). This property is read only.
|
| SampleRawData
|
Retrieve current values of Raw data in a specific sample. Return value: Double(). This property is read only.
|
| SampleRawDataForIndPlot
|
Retrieve current values of Raw data in a specific sample for ind plot. Return value: Double(). This property is read only.
|
| SampleSetIDs
|
Retrieve current values of Sample Info SetIDs. Return value: Double(). This property is read only.
|
| SampleStdDvs
|
Retrieve current values of Sample Info StdDvs. Return value: Double(). This property is read only.
|
| SampleUCL
|
Retrieve sample UCL. Return value: Double. This property is read only.
|
| SampleUCLV
|
Retrieve sample UCL for V chart. Return value: Double. This property is read only.
|
| SampleUCLs
|
Retrieve current values of Sample Info UCLs. Return value: Double(). This property is read only.
|
| SampleUWL
|
Retrieve sample UWL. Return value: Double. This property is read only.
|
| SampleUWLV
|
Retrieve sample UWL for V chart. Return value: Double. This property is read only.
|
| SampleUWLs
|
Retrieve current values of Sample Info UWLs. Return value: Double(). This property is read only.
|
| SampleUWLsForVarChart
|
Retrieve current values of UWLs for var chart. Return value: Double(). This property is read only.
|
| SampleVariances
|
Retrieve current values of Sample Info Variances. Return value: Double(). This property is read only.
|
| Sampleflags
|
Retrieve current values of Sample Info flags. Return value: Double(). This property is read only.
|
| SamplesWithAlarmsViolations
|
Retrieve an array with the current alarm violation (note: regardless of whether or not these are being checked by the calling project!). Return value: Double(). This property is read only.
|
| SelectionCondition
|
Gets/sets the selection condition. Return/assignment value: Object.
|
| SetName
|
Name of set (of samples). Return/assignment value: String.
|
| SetNumberForSampleNumber
|
Retrieve SetID (number) for specific sample number (referenced from 0; i.e., the first sample is sample number 0). Return value: Integer. This property is read only.
|
| SetProcessDelta
|
Return/assignment value: Double.
|
| SetProcessLSL
|
Return/assignment value: Double.
|
| SetProcessNominal
|
Return/assignment value: Double.
|
| SetProcessNominalIsDefined
|
Return/assignment value: Integer.
|
| SetProcessSigmaLimit
|
Return/assignment value: Double.
|
| SetProcessTypeOfSpec
|
Type of process capability specifications. Return/assignment value:
IQCTypeOfProcessCapabilitySpecs.
|
| SetProcessUSL
|
Return/assignment value: Double.
|
| SetRawData
|
Retrieve current values of Raw data. Return value: Double(). This property is read only.
|
| ShiftForCusum
|
Shift multiplier for cusum chart. Return/assignment value: Double.
|
| ShortNameInActionCodeTable
|
Return/assignment value: String.
|
| ShortNameInCauseCodeTable
|
Return/assignment value: String.
|
| ShortNameInCommentCodeTable
|
Return/assignment value: String.
|
| ShortNameInInclusionCodeTable
|
Return/assignment value: String.
|
| ShortNameInIndividualCodeTable
|
Return/assignment value: String.
|
| SigmaForRange
|
Retrieve current values of sigma for range. Return value: Double. This property is read only.
|
| SigmaForS
|
Retrieve current values of sigma for range. Return value: Double. This property is read only.
|
| SigmaValue
|
Current value of Sigma. Return/assignment value: Double.
|
| SkewnessValue
|
Retrieve current value of Skewness for non-normal chart computations. Return value: Double. This property is read only.
|
| StartSampleForApplicationSet
|
Starting sample number for application set. Return value: Integer. This property is read only.
|
| StartSampleForComputationSet
|
Starting sample number for computation set. Return value: Integer. This property is read only.
|
| TotalN
|
Retrieve current value of total N, for optional set. Return value: Double. This property is read only.
|
| TotalNumberOfSamples
|
Retrieve total number of samples. Return value: Integer. This property is read only.
|
| TriggerAlarmForObservationOutOfSpecification
|
Trigger Alarm For Observation Out Of Specification. Return/assignment value: Boolean.
|
| TriggerAlarmForRunsTestViolation
|
Trigger Alarm For Runs Test Violation. Return/assignment value: Boolean.
|
| TriggerAlarmForSampleOutOfControl
|
Trigger Alarm For Sample Out Of Control. Return/assignment value: Boolean.
|
| TriggerAlarmForSampleOutOfWarning
|
Trigger Alarm For Sample Out Of Warning. Return/assignment value: Boolean.
|
| TypeOfApplicationSetSample
|
Sample selection type for application set. Return value: Integer. This property is read only.
|
| TypeOfCenterLineValue
|
Compute X-Bar center line value from data (e.g., X-Bar = Mean) or user-defined (X-Bar = Value). Return/assignment value:
IQCChartParameters.
|
| TypeOfComputationSetSample
|
Sample selection type for computation set. Return value: Integer. This property is read only.
|
| TypeOfControlLimits
|
Type of control limits. Return/assignment value:
IQCTypeOfLimits.
|
| TypeOfControlLimitsForVarChart
|
Type of control limits for variability chart (e.g., R, S). Return/assignment value:
IQCTypeOfLimits.
|
| TypeOfInputDataForParetoChart
|
Type of input data for Pareto chart (codes, counts, codes and counts). Return value:
IQCTypeOfInputDataForParetoChart. This property is read only.
|
| TypeOfInputForAChart
|
Type of input data for attribute charts (counts, proportions, or raw data). Return value:
IQCTypeOfInputdataForAttributeChart. This property is read only.
|
| TypeOfKurtosisValue
|
Compute kurtosis from data (all valid samples, after brushing), or use user-specified kurtosis. Return/assignment value:
IQCChartParameters.
|
| TypeOfMovingAverageLine
|
Type of moving average line. Return/assignment value: Integer.
|
| TypeOfPartNominalValues
|
Type of nominal value for a part. Return/assignment value:
IQCChartParameters.
|
| TypeOfPartVariationValues
|
Type of variation value for a part. Return/assignment value:
IQCChartParameters.
|
| TypeOfSampleName
|
Type of sample name. Return/assignment value: Integer.
|
| TypeOfShortRunChart
|
Type of short run chart. Return/assignment value:
IQCTypeOfShortRunChart.
|
| TypeOfSigmaValue
|
Compute sigma value from data (e.g., Sigma = R/d2) or user-defined (Sigma = Value). Return/assignment value:
IQCChartParameters.
|
| TypeOfSkewnessValue
|
Compute skewness from data (all valid samples, after brushing), or use user-specified skewness. Return/assignment value:
IQCChartParameters.
|
| TypeOfWarningLimits
|
Type of warning limits. Return/assignment value:
IQCTypeOfLimits.
|
| TypeOfWarningLimitsForVarChart
|
Type of warning limits for variability chart (e.g., R, S). Return/assignment value:
IQCTypeOfLimits.
|
| UnequalNMethod
|
Computational method for unequal sample N. Return/assignment value:
IQCUnequalNComputation.
|
| UnequalNMethodForVarChart
|
Computational method for unequal sample N for variability chart (e.g., R, S). Return/assignment value:
IQCUnequalNComputation.
|
| UpdateASet
|
Update a set with data and return status. Return value: Integer. This property is read only.
|
| UserDefinedValueOfKurtosis
|
User-defined value for kurtosis of individual observations, for non-normal chart. Return/assignment value: Double.
|
| UserDefinedValueOfSkewness
|
User-defined value for skewness of individual observations, for non-normal chart. Return/assignment value: Double.
|
| VChartType
|
Chart type for variable control chart. Return/assignment value:
IQCVchartType.
|
| VarChartComputedFromAggregatedData
|
Logical variables (TRUE/FALSE; 1/0); if variable control chart was computed from aggregated data (raw data are not available). Return value: Boolean. This property is read only.
|
| VariableForApplicationSet
|
Variable number for application set. Return value: Integer. This property is read only.
|
| VariableForComputationSet
|
Variable number for computation set. Return value: Integer. This property is read only.
|
| VariableForPieceCodes
|
Variable/field number with codes/names for piece identifiers (for attribute charts, reading raw data/database format). Return value: Integer. This property is read only.
|
| VariableNumberForActions
|
Set field number with codes/names for actions. Return/assignment value: Integer.
|
| VariableNumberForCauses
|
Set field number with codes/names for causes. Return/assignment value: Integer.
|
| VariableNumberForComments
|
Set field number with codes/names for comments. Return/assignment value: Integer.
|
| VariableNumberForInclusions
|
Set field number with codes/names for inclusion/exclusion. Return/assignment value: Integer.
|
| VariableNumberForParetoCodes
|
Variable/field number with Codes for Pareto chart. Return value: Integer. This property is read only.
|
| VariableNumberForParetoCounts
|
Variable/field number with Counts for Pareto chart. Return value: Integer. This property is read only.
|
| VariableNumberForPartIDs
|
Variable/field number with part names (ID's);if equal to -1, then default labels will be used. Return/assignment value: Integer.
|
| VariableNumberForPartIdendifier
|
Variable/field number with codes/names for part identifier. Return value: Integer. This property is read only.
|
| VariableNumberForSampleIDs
|
Variable/field number with sample names (ID's);if equal to -1, then default labels will be used. Return/assignment value: Integer.
|
| VariableNumberForSampleIdendifier
|
Variable/field number with codes/names for sample identifier. Return value: Integer. This property is read only.
|
| VariableNumberForSampleSizes
|
Variable/field number with sample sizes (for attribute charts). Return value: Integer. This property is read only.
|
| VariableNumberForSampleVariability
|
Set field number with variability measure (for variable control charts from aggregated data). Return/assignment value: Integer.
|
| VariableNumberToPlot
|
Variable/field number to plot. Return value: Integer. This property is read only.
|
| WarningExists
|
Logical variables (TRUE/FALSE; 1/0); if there is a current warning message. Return/assignment value: Boolean.
|
| WarningMessage
|
Returns last warning message (string) if one exists. Return value: String. This property is read only.
|
